Accelerator SSD Cache Drive; Installing the Nvelo Software
Par. Mike Clements Posté Jan 10th 2012
The Accelerator Series solid-state cache drives are designed for desktop PC users who want to give their Microsoft® Windows® based PC a dramatic performance boost with minimal cost and hassle. Corsair's new line of SSD cache drives includes premium caching software from NVELO, for improved boot times and lightning-quick file access. The software quickly installs in 5 easy steps.
For those users still using HDDs for the primary or OS drive, there is a great new way to add an SSD to the mix to gain great performance while still using the full storage capability of their HDD. You will not need to reinstall the operating system and you'll be up and running in minutes. Add SSD caching software and an SSD to an average system and you can have your cake and eat it too!
The Accelerator Series is designed for desktop PC users who want to give their Microsoft® Windows® based PC a dramatic performance boost with minimal cost and hassle. Corsair's new line of solid-state cache drives includes premium caching software from NVELO, for improved boot times and lightning-quick file access. After connecting an Accelerator Series SSD cache drive to their computer's SATA port and installing the caching software provided with the drive, users will see an immediate speed boost. No drive mapping, no reinstallation of the operating system or applications, and no complex file management is needed — the Accelerator Series SSD cache drive works in tandem with the customer's existing hard drive to provide optimized performance. Customers may see an improvement in file read/write speeds of up to 5x their current hard drive performance after installing a Corsair Accelerator Series SSD cache drive.
The first step is to install the SSD to your system. Simply mount the drive in your case, connect the SSD to a SATA port, connect power to the disk, boot to your OS, and then you are ready to begin the software installation.
Run the installer and you will see the first screen. Select the NEXT button and move to the second step.
The second step is to accept the license agreement for the software. If you agree to accept, tick the box and select the NEXT button again.
The third step is to enter your product key. Type your key into the dialogue box exactly as it is shown in your documentation and select NEXT.
Next, you'll need to select your drives for the Target Drive and for the Cache Drive. Designate your drives and select NEXT.
You will be asked to verify that you have selected the correct drives. Be sure to select the proper cache drive as all data will be lost on the selected Cache Drive. Once you have made this verification, select NEXT.
Once you have verified your drive selection, the next step will begin the actual software installation. Select NEXT and you you can monitor the progress in the progress window.
Once the software installation is complete, you will be prompted to select the FINISH option. This will complete the software installation. At this point, you will be prompted to reboot your system to complete the process.
If you would like to verify the status of your Dataplex caching software, navigate to the Programs folder for the Dataplex software as seen below.
Double click the Dataplex Status icon and you will see the status window as shown below.
At this point, the best thing you can do is simply use your system. You should now be enjoying the benefits of having a blazingly fast SSD cache drive for your OS to use. Your old HDD is now Accelerated!
alan martinez
posted on Jan 10th 2012If i were to buy this corsair ssd for cache would my motherboard have to be set to ahci or leave it in ide mode.
Dave Bowman
posted on Jan 10th 2012Fantastic news from the future; I almost can't wait another 360 days or so to buy it
George Wilkerson
posted on Jan 10th 2012Not only do we have to wait for what seems like 100 years, we have to watch the price go higher over time. I hope another MFG comes up with the same thing and puts it on the market sooner than Corsair.
wanda shingler
posted on Jan 10th 2012i ordered the 45 gb version from newegg and received the drive w/o any software. so how and where do i get it tks
Brian Kennedy
posted on Jan 10th 2012No problem with installing. Make sure you write the code down, or take a picture like I did with my I-Phone. That made it much easier. I did end up having to re-install the wireless netwrok card I was using. Maybe because the software needs to reside on the new drive? Also, when it asks for your code you must use a dash between the (4) digits. So far, so good.
Brian Kennedy
posted on Jan 10th 2012You need to go to the website to get the software. Save a copy also.
Richard Borras
posted on Jan 10th 2012I having an install issue. I have a RocketRaid Card with 15K SAS HardDrives. When I go instal the software it tells me that the target driver doesnt have a valid serial number. What can I do?
rod rosenberger
posted on Jan 10th 2012corrupted directory structure and index ,orphaned files. softwae enableson install then craches with sever errors.cant seem to get this to work with an older xfx 780i motherboard will this work nvidia sata controler?
Vladimir Rajcevski
posted on Jan 10th 2012I have been looking around to see if this software will work with PGP WDE wholedisk encryption. My current dirve is encrypted by PGP WDE, and I am not sure if Dataplex will interfere with it's operation.
James Lamar
posted on Jan 10th 2012James Lamar
posted on Jan 10th 2012I installed Dataplex 1.1.3.3 for my Accelerator 60GB 2 months ago. It worked great until yesterday when the cache became corrupted. I disabled and uninstalled Dataplex and tried to install version 1.1.3.7, but I get a "license in use" message. What do I do next?
Pedro Martinez
posted on Jan 10th 2012Hi, i sold my ssd (corsair accelerator) to a friend, how can he install the NVELO software? he is getting the message, "licence is already in use"
Felipe Silvestre
posted on Jan 10th 2012i formated my pc, and now i gettint the message, "license is already im use". What do i do next?
Roydon Carrick
posted on Jan 10th 2012I have this, but it doesn't work on windows 8.... When are you going to update?
carlos mendez
posted on Jan 10th 2012Buenos días, sucede que tengo instalado la versión CORSAIR_Dataplex_v1.1.3.7. y ahora recibí la versión CORSAIR_Dataplex_v1.3.0.0. Utilice los pasos necesarios para instalar la nueva versión ya que me dicen de parte de ustedes que es mucho mejor y con mejoras en los errores de la versión 1.1.3.7, Ok. Después de desinstalar la versión que tengo instalada. 1.1.3.7, y continuar a instalar la versión 1.3.0.0, todos los pasos se ejecutan normalmente y luego de llegar al último paso me aparece la siguiente ventana mostrándome el siguiente error que me dice lo siguiente: the system partition on disk #1 is used by multiple windows installations (C.E:). dataplex requieres that each windows inatallations has its own system partition. La partición del sistema del disco número 1 se utiliza por varias instalaciones de ventanas (CE :). dataplex requieres que cada instalación de Windows tiene su propia partición del sistema. NOTA: la misma ventana de error me fue mostrada cuando intente instalar la versión CORSAIR_Dataplex_v1.2.0.4. y no le preste mucha atención y decidí instalar nuevamente la versión CORSAIR_Dataplex_v1.1.3.7. Que me estaba y me sigue funcionando correctamente. Pero como todo siempre es necesario aplicar las actualizaciones para el óptimo funcionamiento y rendimiento de mi PC. es por eso que necesito de su ayuda como ente principal en la creación y manejo de este programa para poder actualizar mi PC y SSD corsair acelerator a la versión CORSAIR_Dataplex_v1.3.0.0. GRACIAS Y ESPERO ME PUEDAN PRESTAR TODA SU COLABORACIÓN...
Vous devez être connecté pour poster un commentaire.
cliquez ici se connecter