Support

Please make sure that you have the latest version of the Corsair Link software. You will also want to make sure that you update your H80i/H100i to the latest available firmware.  Please click the links below to get to the product page for your cooler, and then click on the "Downloads" tab to get a direct link to the latest software and firmware.

H80i

H100i

Corsair Link

Please follow thes steps to update the firmware on your Hydro Series cooler:

1. Install the latest version of the Corsair Link software and use the "update firmware" button on the device tab.

2. Once Corsair Link exits a new dialog box comes up and you have to select "Corsair H80i/H100i" and then click back into the dialog box.

3. Use the choose file dialog box to select the unzipped firmware file.

4. Once you hit start it will flash the firmware and go through POST test on the H100i/H80i unit. The fans will spin up to full speed and then go back to the previous profile that was selected before the flash.

5. You can close the firmware flash dialog box and the program will open up again.

6. The service has to be restarted, so detection of the devices and inputs will take 15 to 30 seconds depending on how many you have. It will all come back up in the main program window as well as the devices window.

The cable leading from the fan should connect to the CPU FAN header on your motherboard. The power cable that leads from the pump should be connected to the POWER FAN or CHASSIS FAN header on the motherboard.

The plastic sheet is there as insulation to prevent any metal on metal contact between the backplate of the CPU and your motherboard. You will want to leave the plastic sheet in place.

Please submit a case in Tech Support Xpress (TSX), and let us know which cooler you have and what parts you need.

The hoses on the H60 measure about 11.5 inches in length.

H40 Socket Support: AMD AM2, AMD AM3, AMD FM1, Intel LGA 1155, Intel LGA 1156, Intel LGA 1366, Intel LGA 2011, Intel LGA 775

H70 Core Socket Support: AMD AM2, AMD AM3, AMD FM1, Intel LGA 1155, Intel LGA 1156, Intel LGA 1366, Intel LGA 2011, Intel LGA 775

H80 Socket Support: AMD AM2, AMD AM3, Intel LGA 1155, Intel LGA 1156, Intel LGA 1366, Intel LGA 2011, Intel LGA 775

H100 Socket Support: AMD AM2, AMD AM3, Intel LGA 1155, Intel LGA 1156, Intel LGA 1366, Intel LGA 2011, Intel LGA 775

Note: 1155 and 1156 are both identical when it comes to installing a CPU cooler.  You will want to use the 1156 instructions when mounting a Hydro Series CPU cooler to a socket 1155 motherboard.

H80 Radiator Dimensions:

120mm x 38mm

2600RPM

Both the A50 and A70 are compatible with the following CPU socket types:

Intel

LGA 775, LGA 1156, LGA 1366

AMD

AMD Core AM2, AMD Core AM3

Dimensions of Heatsink only (not including fans)

A50
Height: 160mm
Length: 120mm
Width: 54mm

A70
Height: 160mm
Length: 120mm
Width: 70mm

Hydro Series Coolers from Corsair are high performance liquid CPU cooler. They are designed with a self-contained water-cooling loop with integrated pump and reservoir, and require no maintenance.

Our Hydro Series CPU coolers are designed to be a closed-loop solution with no maintenance required at all. The units come pre-filled and feature proprietary hoses that virtually eliminate evaporation of water. The expected lifespan of the average unit is significantly longer than the warranty period.

The liquid inside our Hydro Series CPU coolers is a mixture of distilled water with Propylene Glycol added to prevent corrosion and organic build-up.

The screw thread and length are 6 x 32 x 1 1/4"

#6 machine thread, 32 TPI (threads per inch), 1.25 inches in length.
http://en.wikipedia.org/wiki/Screw#U...hread_Standard