
The Corsair SSD Toolbox
Published on 05/06/2013By Mike Clements
Force Series™ GS Solid-State Drives: Speed for the real world.Force Series™ GS solid-state drives are powered by a SandForce SF-2200 SSD Processor and fast Toggle NAND memory for both fast sequential read/write speeds and strong random write speed for impressive real-world performance.
Force Series GS solid-state drives are powered by a SandForce SF-2200 SSD Processor and fast Toggle NAND memory for both fast sequential read/write speeds and strong random write speed for impressive real-world performance.
Many SSDs achieve quick load times with files that can be compressed and decompressed at the read/write stage, but slow down significantly reading data that's already compressed. Neutron goes one better by offering impressive performance even with compressed and non-compressible data.
Force Series GS supports SATA 3 6Gb/s, so you’ll get superior performance from newer notebook and desktop PCs that use the newest standard. It’s also fully backward compatible with SATA 2.
The first key to real performance is sequential read and write speeds. You’ll feel the speed when you’re loading and saving large files. Solid-state drives store files in contiguous blocks of memory, so you’ll get nearly instantaneous response when you click that “Load” or “Save” button.
Fast random write speeds are also critical to performance you’ll notice on a daily basis. If you’re running multiple applications at once, odds are that they’re writing small bits of data to the drive with regularity. The fast Toggle NAND memory gives Force Series GS the agility to handle them all without slowing down.
Force Series GS solid-state drives support the Windows 7 TRIM command. This allows them to store only the data they need and perform memory optimization to ensure the fastest possible write speeds.
Traditional mechanical hard drives spin at thousands of revolutions per minute. This takes power, and generates noise and heat. Since SSDs have no moving parts, there's no noise or vibration, and the lower power consumption helps keep things cool inside your PC. It can also save battery life on notebooks.
Because SSDs have no moving parts, they can handle shock, vibration and temperature changes far in excess of traditional hard drives. That's important for desktop PCs, and essential for notebooks.
Much has been written about overprovisioning and its implementation on SSDs. In short, overprovisioning, or OP, is a portion of storage space on an SSD that is reserved for use only by the SSD controller. The three most common uses for this space are wear leveling, the replacement of bad blocks, and read-modify-writes. Overprovisioning serves to help increase both the longevity and performance of SSDs and it is a very common practice among SSD manufacturers.
However, some users would like to be able to buy their SSDs without the built in overprovisioning and make the decision to OP, or not to OP for themselves. They prefer the flexibility of deciding for themselves when to OP and how much space to use based on their specific needs. Corsair has announced and is now offering SSDs without this overprovisioned space.
Corsair SSDs with overprovisioning space typically have used 7% of the total SSD storage capacity. This means that users now have a choice with these new drives to use them with or without overprovisioning. Users can manually overprovision the drives if they wish or, they can leave them at their full capacity with no overprovisioning and enjoy the extra space.
For users of 256GB SSDs, this means they can have an extra 16GB of storage capacity on their drive over the equivalent 240GB overprovisioned SSD. Of course, RAID users will benefit even more as the number of drives is increased.
In reading some of that aforementioned information about overprovisioning, I've found a great deal of very useful information over at Anandtech. Here's a diagram from one of Anand's SSD articles highlighting how overprovisioning works.
Our initial offerings in the non-OP drive arena are in the Force Series GS and the Neutron Series with more to come. For more information on our SSD lineup, please visit our Corsair website SSD page.
To OP, or not to OP. That is the question. Whether tis nobler to the PC performance...
Corsair proudly brings you the Corsair SSD Toolbox. This helpful utility provides users with several powerful and useful tools for use with Corsair SSDs. Let's take a look. Download the Corsair SSD Toolbox HERE.
The Corsair SSD Toolbox will run on:
We have provided a detailed help file which can be accessed by clicking on the question mark symbol shown here circled in red on the upper left side of the screen.
After you select firmware update the tool will scan your drive and check for firmware updates. If there is an update available, the dialogue will prompt you to update the firmware or cancel the operation.
Note: Firmware updates can only be executed when the SSD controller is in AHCI mode. Firmware updating via this toolbox is enabled for The Corsair Series Force 3, Force Series GT, Force Series GS, Neutron Series, and Neutron Series GTX SSDs. Earlier and EOL Corsair drives with firmware updates can be updated manually using the tools supplied on our website.
Note: Corsair recommends that users update their OS drive as attached storage when possible. Some systems will require the SSD to be disconnected briefly before the new firmware version will appear in the Drive Information window.
Additional functions can be activated with the column of buttons down the left side of the toolbox. Corsair is now producing SSDs that do not have factory overprovisioning. For users that desire to manually overprovision their drives, we have provided a function for this. Overprovisioning your drive can contribute to maintaining better performance and adding longevity to your SSD.