CORSAIR iCUE LINK SYSTEM HUB

iCUE LINK ECOSYSTEM CONTROL CENTER

GETTING TO KNOW YOUR SYSTEM HUB

A. iCUE LINK active port	C. USB input
B. Power input	D. Tach output

PACKAGE CONTENTS

1x iCUE LINK System Hub

1x iCUE LINK Cable, 600mm

1x iCUE LINK Cable, 100mm

1x PCIe power cable, 150mm

1x USB cable, 300mm

SYSTEM HUB INSTALLATION

CONNECT THE SYSTEM HUB TO USB AND POWER

Connect the 6-pin micro-fit connector (4) into the power input (B) of the System Hub (1).

Connect the 6-pin PCIe connector (4) into a dedicated power cable from the power supply.

NOTE: Avoid reverse insertion of the PCI-E power cable to prevent defects.

Connect the micro-USB cable (5) into the USB input (C) of the System Hub (1).

Connect the 9-pin USB 2.0 connector (5) into a USB 2.0 header on the motherboard.

CONNECT THE TACH CABLE (OPTIONAL) AND iCUE LINK DEVICES

If you are using an iCUE LINK CPU Cooler, connect the 2-pin, 1-wire tach cable into the System Hub (1). Connect the 3-pin connector into the CPU_FAN header on the motherboard.

Connect your iCUE LINK devices to the System Hub (1) using the provided iCUE LINK cables (2,3). Use one of the two iCUE LINK ports (A) of the System Hub (1) for this connection.

WARRANTY

iCUE LINK System Hub has a 2-year warranty.

LEGAL

© 2023 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.