SKU CW-9060009-WW
Hydro Series™ H100i Hochleistungs-Prozessorkühler mit Kühlmittel

159,99 € EUR

Der Hydro Series™ H100i bietet extreme Prozessorkühlung mit einem an der Oberseite montierten 240-mm-Kühler sowie CORSAIR Link™ zur Überwachung und Regelung der Kühlleistung.


Kühlung für extrem hohe CPU-Leistung mit integriertem CORSAIR LINK

Unterstützt Ihr PC-Gehäuse einen an der Oberseite montierten 240-mm-Kühler? CPU-Kühlung mit völlig neuen Maßstäben. Der H100i basiert auf dem fortschrittlichen Design des Hydro Series H80i und bietet zusätzlich einen Doppelkühler für noch bessere Leistung.

Überwachung und Steuerung durch CORSAIR LINK

Kontrolle von Temperatur, Lichteffekten und Lüfterdrehzahl auf dem Bildschirm. Keine weitere Hardware erforderlich.

Vollkommen unabhängig

Der Hydro Series H100i ist ein vorgefülltes geschlossenes System, das niemals neu befüllt werden muss.

Doppelkühler mit speziellem Lüfterdesign

Der an der Oberseite montierte 240-mm-Kühler bietet eine extragroße Oberfläche für maximale Kühlleistung. Breite, flach angewinkelte Lüfterflügel in den 120-mm-Lüftern bieten ein besseres Verhältnis zwischen statischem Druck und Geräuschpegel und somit höhere Effizienz bei geringerer Geräuschentwicklung.

Integration von CORSAIR LINK

Keine weitere Hardware erforderlich – einfach das beigefügte CORSAIR LINK-Kabel an einen USB-Header auf der Hauptplatine anschließen und die kostenlose CORSAIR LINK Dashboard-Software herunterladen. Damit können Sie direkt auf Ihrem Desktop die Kühlmitteltemperatur überwachen und die Kühlleistung regeln.

Werkzeugfreie magnetische Montagehalterungen für eine Vielzahl von Plattformen

Das modulare Design erleichtert die Installation und ist mit Intel®- und AMD™-Prozessoren kompatibel.

Hochdichte Leitungen mit großem Durchmesser

Hohe Lebensdauer dank minimalem Verdampfen des Kühlmittels, robuste Materialien für höchste Flexibilität bei hervorragendem Leckageschutz.

Technische Daten

  • Radiator Dimensions: 120mm x 275mm x 27mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2700 RPM
  • Fan Airflow: 77 CFM
  • Noise Level: 37.68 dBA
  • Fan Static Pressure: 4.0 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Radiator Material
CORSAIR iCUE Compatibility
Radiator Dimensions
120mm x 275mm x 27mm
Fan Dimensions
120mm x 25mm
Fan Speed
2700 RPM
Number of Fans
Cooling Socket Support
Intel 1150/1151/1155/1156 | Intel 2011/2066 | AMD AM3/AM2
Radiator Size
Fan Model
SP Series
Fan Airflow
77 CFM
Noise Level
37.68 dBA
Fan Static Pressure
4.0 mm-H2O

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to install CORSAIR AMD Bracket



Beitrag vom  23. November 2012

Hydro Series H100i wins Guru3D Recommended Award

“So if you are on the lookout for an easy to install, good looking and really nice performing product but don't want to spend heaps of dough on it, then most definitely be consider the Corsair H100i LCS kit. Whether you are a bit of a noise freak like I am or are on the lookout for a little more, the kit seems to offer it all and thus comes very much recommended.”

Ausführlicher Testbericht!

Beitrag vom  23. November 2012

Kitguru gives the H100i its Must Have Award!

“There’s no doubt about it, the Corsair H100i is even more impressive than the H100 it replaces. It’s also clear that Corsair are very serious about maintaining their dominant position in the factory-filled liquid cooling” market.

Ausführlicher Testbericht!

Beitrag vom  20. November 2012

The H100i wins a Gold award from!

“Prior to this review the H100 held the top spot for thermal performance and although we had anticipated results would be near to H100 for H100i we didn’t expect such a triumph. H100i outperforms anything we have tested; even with the cooling fans set to ‘Quiet Mode’ (lower RPM) the performance is still outstanding. Corsair have changed the fan of choice for H100i and opted for a much more refined set of fans based on SP120. These fans deliver high-pressure and low-noise, being specifically designed for radiator usage – unlike many other liquid coolers currently available to buy from other brands.”

Ausführlicher Testbericht!


Beitrag vom  12. Oktober 2012

Pro-Clockers gives H100i 'Highly Recommended' award!

"There are several reasons to purchase the new H100i over the older H100 or many of the other dual rad (240mm) AIO water-cooling kits out there. Some of these reasons might be the new higher performing fans, the easier to install mounting hardware, wider yet more flexible tubing, or the new Corsair Link v2 software. Whatever the reason you will be getting a great piece of hardware."

Ausführlicher Testbericht!

Beitrag vom  12. Februar 2012

Hydro Series H80i and H100i win Performance Awards from!

“CORSAIR has reset the bar again at a higher level. Outperforming their own range, adding the LINK software and this complete performance bundle operates at a lower noise level. The 120mm H80i will blend in perfectly in most enclosures, while the 240mm H100i needs a dual 120mm top case. The installation is pure child’s play and no worrying about DIMM incompatibility with your cooling setup. Without any surprise the cooling performance of both Hydro units is again top notch. Being covered by a 5 year warranty, how can you go wrong with one of these new Hydro Coolers?”

Ausführlicher Testbericht!


Beitrag vom  12. Juli 2012

H100i wins 'Excellent' award from!

"For those who are looking for that little extra and have the space for it to Hydro H100i be a very good solution. The model is like his little brother a worthy sequel to last year's high-end model from Corsair, with a series of improvements in both performance and audio-wise. Corsair's commitment to integrate the controller Link is also a real stroke of genius from the company." (Google translation)

Ausführlicher Testbericht!


Beitrag vom  18. April 2013

H100i wins Gold Award at!

The revised model H100 is not only better than its predecessor but also lets the competition look quite old terms of performance

Ausführlicher Testbericht!

VonDallas Morning News

Beitrag vom  12. Mai 2012

H100i wins Premium Grade award from!

“Offering the best cooling that we've ever seen from a single cooler, the H100i is an undeniably impressive piece of kit. Though £90 is a lot to pay for a CPU cooler, it's much cheaper than a custom water-cooling loop (and far less hassle to install) and represents fairly good value over the original H100 too, given that its temperatures, build quality and ease of use have all improved, not to mention the excellent software control.” “It's in LGA2011 rigs that the H100i really excels, however, and for which it would make a brilliant purchase. Not only is it joyfully simple to install, but it offers outstanding performance even at low speed settings, meaning it's fairly priced compared with the £15 cheaper H80i.”

Ausführlicher Testbericht!

Corsair Hydro Series H100i High Performance Liquid CPU Cooler
Magnetic Multi-platform mounting kit for all modern CPU sockets
Dual SP120L High Performance Fans
USB Cable for Corsair Link Compatibility
Fan and radiator mounting screws
Thermal compound (pre-applied)
Quick Start Guide