Hydro Series™ H110i 280 mm Extreme Performance CPU-Flüssigkeitskühler

129,90 € EUR

ADD TO CART

SKU CW-9060026-WW
Hydro Series™ H110i 280 mm Extreme Performance CPU-Flüssigkeitskühler

129,90 € EUR

Der Hydro Series™ H110i CPU-Flüssigkeitskühler besitzt einen 280-mm-Radiator und zwei SP140L PWM-Lüfter für die überragende Wärmeableitung, die Sie für stark übertaktete Prozessoren benötigen.


Kompatibel mit CORSAIR iCUE

Ein 280-mm-Radiator und zwei SP140L PWM-Lüfter liefern die überragende Wärmeableitung, die Sie für stark übertaktete CPUs benötigen.

Der Hydro Series H110i ist ein extrem leistungsstarker Komplett-CPU-Flüssigkeitskühler für Gehäuse mit Montagepunkten für 280-mm-Radiatoren. Der 280-mm-Radiator und die zwei SP140L PWM-Lüfter liefern die überragende Wärmeableitung, die Sie für stark übertaktete CPUs benötigen. Der Lüfter ist mit CORSAIR iCUE kompatibel. Das heißt, Sie können die Kühlleistung anpassen, die Systemtemperatur überwachen und die Farbe der RGB-LED-Anzeige ändern.

280-mm-Radiator

Der Schlüssel zu einer schnellen, effizienten Kühlung ist eine maximierte Kühloberfläche. Wenn Ihr PC-Gehäuse über zwei Montagepunkte für 140-mm-Lüfter in einem für einen 280-mm-Radiator geeigneten Abstand verfügt, können Sie mit dem H110i das Kühlpotenzial Ihres Gehäuses voll ausschöpfen.

Technisch ausgereifte SP140L PWM-Lüfter

Die inbegriffenen 140-mm-Lüfter sind speziell konstruiert für Luftdurchsatz mit hohem statischem Druck bei minimalen Turbulenzen und Geräuschen. Sie sind PWM-gesteuert, sodass Sie die Lüftergeschwindigkeit für das optimale Gleichgewicht zwischen Kühlung und Geräuschpegel anpassen können.

Integriertes CORSAIR iCUE

Schließen Sie das mitgelieferte CORSAIR iCUE-Kabel an einen USB-Header des Motherboards an und laden Sie die kostenlose CORSAIR iCUE-Software herunter, um den Kühler noch leistungsstärker zu machen. Mit dieser Software können Sie die Kühlleistung anpassen, die Temperatur von Kühlflüssigkeit und CPU überwachen und die Farbe der RBG-LED-Anzeige vom Standardweiß auf eine zu Ihrem System passende Farbe ändern oder verschiedene Farben je nach erfasster Temperatur oder anderen Werten anzeigen lassen.

Hochleistungs-CPU-Kühlung – ganz einfach

Der H110i besteht aus einem geschlossenen Kreislauf, der bereits mit Kühlflüssigkeit gefüllt ist. Inbegriffen ist eine modulare Halterung für eine schnellere, werkzeuglose Montage. Das Design von Coldplate und Pumpe wurde für fein abgestimmte Effizienz verbessert.

CPU-Wasserkühler der Hydro Series

CPU-Kühler der Corsair Hydro Series liefern die Leistungsstärke der Flüssigkeitskühlung in einem kompakten, leicht montierbaren Paket. Die Kühler ermöglichen durch ihre unübertroffene Kühlleistung eine stärkere Übertaktung, sind aber weniger komplex als die herkömmlichen wassergekühlten Kits.

Intelligente Steuerung. Unendliche Möglichkeiten.

Die CORSAIR iCUE-Software erweckt Ihr System zum Leben – mit dynamischer synchronisierter RGB-Beleuchtung, anpassbaren Lüfterdrehzahlen für einen geräuschlosen Betrieb und erweiterter Systemüberwachung.

WEITERE INFORMATIONEN

INHALT UND TECHNISCHE DATEN



  • Package Contents

  • Hydro Series H110i Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two SP140L High Torque 140mm Fans
  • USB cable for Corsair Link™ Integration
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011 and 2011-3
  • AMD™ sockets FM1, FM2, AM2, AM3, and AM4

Technische Daten

  • Radiator Dimensions: 140mm x 322mm x 27mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 2100 RPM
  • Fan airflow: 113 CFM
  • Noise level: 43 dBA
  • Fan static pressure: 3.99 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
Yes
Radiator Dimensions
140mm x 322mm x 27mm
Fan Dimensions
140mm x 25mm
Fan Speed
2100 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
RGB
Radiator Size
280mm
Fan Model
SP Series
Fan airflow
113 CFM
Noise level
43 dBA
Fan static pressure
3.99 mm-H2O
MEHR LADEN

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.