SKU CW-9060015-WW
CPU-Flüssigkeitskühler der Hydro Serie™ H75

87,90 € EUR

Die Hydro Series™ H75 stellt effektive und effiziente CPU-Flü,ssigkeitskü,hlung in einer kompakten Grö,ß,e bereit. Der 120 mm breite Kü,hler hat eine Hö,he von nur 25 mm und ist mit den meisten Gehä,usen kompatibel. Und die beiden PWM-Lü,fter sind zur regulierbaren Kü,hlleistung PWM-gesteuert. Die werkzeuglosen Halterungen unterstü,tzen die meisten Mainboards von Intel und AMD.

NICHT MEHR VORRÄTIG

Flache 25 mm Kühler und zwei PWM-Lüfter für kompakte, regulierbare CPU-Flüssigkeitskühlung

Die Hydro Series H75 stellt effektive und effiziente CPU-Flüssigkeitskühlung in einer kompakten Größe bereit. Der 120 mm breite Kühler mit einer Stärke von nur 25 mm, gepaart mit knickbeständigen Schläuchen im Standard-Durchmesser, gewährleistet die Kompatibilität auch mit kleineren Gehäusen und engerem Platz. Die beiden SP120L 120 mm Lüfter unterstützen Mainboard-PWM-Lüfteranschlüsse, damit Ihr Mainboard die Lüftergeschwindigkeit automatisch, basierend auf der CPU-Temperatur, kontrollieren kann. Das werkzeuglose Halterungssystem ist mit den meisten Sockeln von Intel und AMD kompatibel. Eine „Coldplate“ mit Kupferlamellen und eine hochwertige, gelagerte Keramikpumpe halten zuverlässig und geräuscharm Wärme von Ihrer CPU fern. Und, wie alle CPU-Flüssigkeitskühler der Hydro Series, ist auch die Hydro Series H75 vollkommen selbsttragend und erfordert weder Befüllung noch Wartung.

Coldplate mit Kupferlamellen

Die Coldplate zieht Wärme von Ihrer CPU in die zirkulierende Flüssigkeit. Kupfer verfügt über herausragende Wärmeleitfähigkeit und das Lamellendesign sorgt für eine schnelle und effiziente Wärmeübertragung.

25 x 120 mm Kühler

Die 25 mm Stärke kombiniert reichlich Kühloberfläche mit einer flachen Größe, die sich ideal für kleinere Gehäuse oder solche Installationen eignet, bei denen Platz eine Rolle spielt.

Zwei 120mm PWM-Lüfter mit hohem Drehmoment

Zwei, an den sich gegenüberliegenden Seiten des Kühlers angebrachte Lüfter sorgen für einen Hochgeschwindigkeits-Luftstrom im Gegentakt (Push-Pull). Sie können sie zur präzisen Steuerung der Lüftergeschwindigkeit an die Standard-PWM-Lüfteranschlüsse auf Ihrem Mainboard anschließen und die genaue Kühlleistung bestimmen, die Sie benötigen.

Kompatibel mit den meisten Sockeln von Intel® und AMD®

Die Hydro Series H75 arbeitet praktisch mit allen derzeitigen Mainboards von Intel und AMD.

Hochwertige, gelagerte Keramikpumpe

Der zuverlässige Pumpenmechanismus ist für Laufruhe ausgelegt.

Werkzeuglose Installation der Halterung

Die gesamte Montage-Hardware ist im Lieferumfang enthalten. Die Installation ist einfach und Sie brauchen sich nicht auf die Jagd nach einem Schraubendreher zu begeben.

INHALT UND TECHNISCHE DATEN




Technische Daten

  • Radiator Dimensions: 120mm x 152mm x 25mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2000 RPM
  • Fan airflow: 54 CFM
  • Noise level: 31.4 dBA
  • Fan static pressure: 2.8 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 25mm
Fan Dimensions
120mm x 25mm
Fan Speed
2000 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
SP Series
Fan airflow
54 CFM
Noise level
31.4 dBA
Fan static pressure
2.8 mm-H2O
MEHR LADEN

Hydro H75 Spare Parts List


CO-8950012
Corsair Fan SP120L 2000 RPM, 53.61 CFM, 120mm x 25mm, PWM, Single Pack H75 Replacement Fan
CW-8960017
Hydro Series H75 H105 Intel LGA 1150, 1155, 1556, 1366, 2011 Mounting Bracket Kit
CW-8960018
Hydro Series H75 H105 AMD AM2, AM3, FM1, FM2 Mounting Bracket Kit
CW-8960019
Hydro Series H75 H105 Fan Y-Header Cable

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.