Prozessorkühler Hydro Series™ H55 mit Kühlmittel

72,90 € EUR

ADD TO CART

SKU CW-9060010-WW
Prozessorkühler Hydro Series™ H55 mit Kühlmittel

72,90 € EUR

Der Hydro Series™ H55 bietet ein problemloses Upgrade für die Kühlung Ihres Intel-Prozessors. Das geschlossene Flüssigkühlsystem arbeitet geräuscharmer und effizienter als herkömmliche CPU-Lüfter und eignet sich dank der kompakten Abmessungen perfekt für kleine Gehäuse.

Intel-Prozessor-Leistungsupgrade leicht gemacht

Wenn Sie den standardmäßigen Kühler Ihres Prozessors durch einen Hydro Series H55 ersetzen, wird Ihr Rechner besser gekühlt und läuft geräuschärmer.

Der H55 wird an der Rückseite der Hauptplatine Ihres Rechners eingebaut. Sie benötigen lediglich einen Schraubenzieher.

Die Installation des Hydro Series H55 gelingt dank der kompakten Komponenten und flexiblen Leitungen selbst dann ohne Probleme, wenn nur wenig Platz zur Verfügung steht. Sie verbessern damit die Prozessorkühlung auch in kompakten Gehäusen. Wenn Ihr Gehäuse eine 120-mm-Lüfterbefestigung in der Nähe des Prozessors aufweist,

Geschlossenes Kühlsystem

Der Hydro Series H55 ist ein vorgefülltes geschlossenes System, das niemals neu befüllt werden muss.

Werkzeugfreie Montagehalterungen

Das modulare Design erleichtert die Installation und ist mit allen modernen Intel-Prozessoren kompatibel.

Geräuscharmer 120-mm-Lüfter mit niedriger Drehgeschwindigkeit

Durch die geringe Geschwindigkeit und den großen Durchmesser arbeitet der Lüfter deutlich geräuscharmer als die kleinen, schnellen Lüfter herkömmlicher Prozessorkühler. Der 3-polige Stecker ist mit den meisten Lüftungssteuerungen kompatibel.

Gummileitungen mit geringer Verdampfung

Hohe Lebensdauer dank minimalem Verdampfen des Kühlmittels, robustes Gummi für höchste Flexibilität bei hervorragendem Leckageschutz.

Flache Pumpe

Die Pumpe bietet eine hervorragende Zirkulationsleistung auf kleinstem Raum. Das vereinfacht die Installation und verbessert den Luftstrom im Gehäuse.

Mikrorippen-Kühlplatte auf dem neuesten Stand der Technik mit werkseitig aufgetragener Wärmeleitpaste

Kupfer verfügt über eine hohe Thermalleitfähigkeit, und das Rippendesign fördert den effizienten Wärmeaustausch.

Flache Wärmetauscher aus schwarzem Aluminium

Die flache Formgebung erfordert einen geringeren Luftstrom und trägt damit zum geräuscharmen Betrieb des H55 bei. Kompakte Abmessungen erleichtern die Installation und verbessern die Kompatibilität. Die ansprechende schwarze Lackierung sieht einfach gut aus.

INHALT UND TECHNISCHE DATEN




Technische Daten

  • Radiator Dimensions: 120mm x 152mm x 27mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 1700 RPM
  • Fan airflow: 57 CFM
  • Noise level: 30.32 dBA
  • Fan static pressure: 1.9 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminium
PWM
NO
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 27mm
Fan Dimensions
120mm x 25mm
Fan Speed
1700 RPM
Number of Fans
1
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan airflow
57 CFM
Noise level
30.32 dBA
Fan static pressure
1.9 mm-H2O
MEHR LADEN

VonVortez.net

Beitrag vom  28. Januar 2013

The Hydro Series H55 wins the Silver award from Vortez..net

“H55 is priced around £50, making it affordable to go down the ALC route without having to burn a hole in your pocket. At this price-point H55 offers a great alternative to air cooling.” “Corsair continue to impress even at the lower-end within the Hydro Series. H55 is affordable, good quality and offers a convenient alternative to bulky air cooling.”

Ausführlicher Testbericht!

Hydro H55 Spare Parts List


CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.