
Corsair Obsidian 750D Monster Battlefield 4 System Build Log
Veröffentlicht am 11/05/2013VonDustin Sklavos
Der Hydro Series H110 ist ein All-in-One-Prozessorkühler, der im Vergleich zu normalen CPU-Lüftern eine deutlich höhere Kühlleistung erbringt. Flüssigkühlung bietet zahlreiche Vorteile gegenüber Luftkühlung, und das geschlossene Design des H110 macht den Schutz Ihres Prozessors noch einfacher.
Bei der Kühlung gilt: je größer, desto besser. Wenn Ihr PC-Gehäuse über eine 280-mm-Kühlerbefestigung verfügt, können Sie die Leistung des Hydro Series H110 optimal ausnutzen. Die Lüfter mit großem Durchmesser ermöglichen einen besseren Luftstrom bei geringerer Geräuschentwicklung als die meisten 120-mm-Lüfter, und der 280-mm-Kühler sorgt dank der größeren Oberfläche für schnellere Kühlung.
Die Flügel des 140-mm-Lüfters sind größer als die der meisten 120-mm-Lüfter, sodass sie schon bei geringeren Drehzahlen den erforderlichen Luftstrom erzeugen. Auf diese Weise lässt sich der Geräuschpegel senken, ohne die Leistung zu beeinträchtigen.
Die flexiblen Leitungen sorgen für minimale Verdampfung bei hervorragendem Leckageschutz.
Die Kühlplatte aus Kupfer gewährleistet eine hocheffiziente Wärmeabführung, und der Verteiler ist für erhöhten Durchfluss konzipiert.
Die Montagehalterung ist für eine Vielzahl von Plattformen geeignet und mit Intel®- und AMD™-Prozessoren kompatibel.
The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair
Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.
Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.
Install all four of the standoffs as shown below.
After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.
Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.
The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.
The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.
If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.
Ausführlicher Testbericht!“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”
Ausführlicher Testbericht!“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”
Ausführlicher Testbericht!“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”
“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”
“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”
Ausführlicher Testbericht!