Using a AXi Series PSU and Corsair Link's "power" tab with different configurations to determine power usage during different tasksVeröffentlicht am 05/31/2013
Die Netzteile der AX Series™ bieten erstklassige Leistung mit 80 PLUS PLATINUM-zertifizierter Effizienz, geringer Geräuschentwicklung, komplett modularen Kabelsätzen und hoher Zuverlässigkeit für extrem leistungsstarke Systeme.
Der AX860 stellt ultrasaubere Energie zum Schutz Ihrer PC-kritischen Komponenten bereit. Das effiziente Design verwendet weniger Energie und arbeitet bei niedrigen bis mittleren Lasten geräuschlos; und das vollmodulare Kabel verhilft Ihnen zu einer schnellen, unkomplizierten Installation mit einem besser aussehenden Ergebnis.
Wärmeentwicklung ist vergeudete Energie. 80 PLUS Platinum-zertifizierte Effizienz bedeutet weniger Verschwendung.
Beim Leerlauf des Systems oder bei einfachen Aufgaben wie dem Zugriff auf das Internet oder dem Ausführen von Office-Anwendungen dreht sich der Lüfter gar nicht.
Das modulare Kabelsystem ermöglicht ein problemloses Entfernen überflüssiger Kabel. Sie installieren einfach zuerst das AX Series und fügen dann der Reihe nach Kabel hinzu. So entsteht Kabelsalat von vornherein nicht.
Hochwertige Komponenten und durchdachtes Design für optimalen Schutz Ihrer PC-Bauteile.
Die Netzteile der AX Series verfügen über lange Kabel zur einfachen Verwendung in großen Gehäusen und eine Vielzahl von Anschlüssen für praktisch jede erdenkliche Hardware-Konfiguration.
Alle Stromkabel haben Stecker an beiden Enden. Nichts ist mit dem Netzteil festverdrahtet. Das vereinfacht die Installation (kein Kabelsalat mehr beim Einbau des Netzteils), und Sie können die einzelnen Kabel nach Bedarf hinzufügen. Das Ergebnis: ein übersichtliches System mit besserem Luftstrom.
Kondensatoren, eine dedizierte +12 V-Einzelschiene (single rail) und ein Leistungsfaktorkorrektur (PFC) von 0,99 sorgen für stabile, zuverlässige Stromspannungen mit extrem geringer Restwelligkeit. • Überspannungs- und Unterspannungsschutz, Überstromschutz und Kurzschlussschutz gewährleisten maximale Sicherheit für Ihre wichtigsten Systemkomponenten. Das AX860 ist für maximale Ausgangsleistung bei einer Temperatur von 50 °C für unternehmenskritische Server konzipiert.
Die Netzteile der AX Series entsprechen den Standards ATX12V v2.31 und EPS 2.92; abwärtskompatibel mit den Standards ATX12V 2.2 und ATX12V 2.01 Sie verfügen über einen universellen Wechselstromeingang von 90–264 V. Zu den Sicherheitssiegeln zählen cTUVus, CE, CB, FCC Class B, TÜV, CCC und C-tick.
The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.
The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...
Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.
While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.
Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.
On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.
There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.
Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.
We start on the "System" tab...
On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...
The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...
At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...
Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.
After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.
When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.
Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".
The parts of the Corsair AXi Digital Power Supply that makes them unique when compared to other desktop power supplies is the absence of a PFC/PWM controller IC (integrated circuit) on the power supply's primary side and a supervisor IC on the power supply's secondary side. Both of these parts have been replaced with DSP, which stands for "Digital Signal Processor".
AXi PSUs still use what's called a "resonant mode" topology like a lot of modern day super-efficient power supplies, but typically in other resonant mode PSUs a PWM controller IC changes the power supply's switching frequency based on an analog signal derived from the load measured at the transformer. This makes the power supply more efficient at a wider range of loads compared to other power supply topologies, but doing this alone can affect ripple and noise and voltage regulation.
The resonant mode controller, shown above, is just about the only IC you'll find in an AXi power supply that you may also see in other high end power supplies.
The supervisor IC is the heart of the power supply's safety functions. Functions like OCP (over current protection, which is protection from any one output drawing too much current), OPP (over-power protection, which prevents overloading), OVP (over-voltage protection, which measures if voltage goes too high), UVP (under-voltage protection), and SCP (short circuit protection). Temperatures are also measured within the power supply and this is reported to the IC's OTP (over-temperature protection). If any value programmed into the IC is exceeded, the IC is instructed to shut down the power supply.
Above is a supervisor IC found in a Corsair GS800 power supply.
In an effort to improve voltage regulation (drops in voltage as loads increase), the information concerning the power supply's output voltage is sent back to the PWM controller via an analog signal. This information moves relatively slow when compared to the ever-varying loads of your typical PC, so voltage regulation is still not as good as it can be.
Above we see two more ICs found inside an AXi series power supply. The chip on the bottom is the main MCU, or "MCU I". The chip on the top is a USB MCU, or "MCU II". These guys handle what goes on on the secondary side of the power supply.
The MCU I does what we call "housekeeping". It has a lot of the same functions as a supervisor IC in an analog controlled PSU. Things like OCP, OPP, OVP, etc. are all monitored by this chip. This chip also handles the PMBus (power management bus) and thermal monitoring and fan control. The MCU I also monitors the power on (soft on/off) and power good signals coming from the motherboard. On top of all of this, the MCU I also monitors the DC output for voltage drop, ripple and noise and communicates back to the DSP to address any issues that may come up.
The MCU II is the chip that allows the user to turn on/off the single/multiple +12V rail capability of an AXi PSU via the Corsair Link software. The self test function is also controlled by this chip.
Since the DSP accumulates all of this information about the power supply, and does so in real time, we can deliver it to the end user via our Corsair Link software. Power supplies have attempted to deliver similar information about the power supply to the end user in the past; either via software or displayed on a 5.25" bay LCD. But since the information about the power supply in these older units was accumulated via the PFC/PWM controller and supervisor IC, the information had to be converted to a digital signal before being displayed. This adds a good deal of cost and prevents the information from being delivered as close to real time as possible.
Using Corsair Link, we can monitor everything from AC input voltage, output wattage... even the current being delivered to each graphics card's PCIe controller! Above you can see I've enabled OCP on each modular connector (essentially making the AXi a multiple +12V rail power supply) and turned all of the limits down to 20A.
We can also keep track of the temperature inside the power supply and how fast the fan is spinning:
All in all, AXi Digital Power Supplies are so much more than your average desktop PSU on so many levels. By utilizing a DSP, Corsair offers improved efficiency while maintaining stable voltage output and minimizing unwanted ripple and noise. And because all of this information is maintained in a digital format, and output to the Corsair Link software interface is practically seamless!
To sum up, if you don't need the extra features of the AX860i (mainly the software monitoring/control) and want the top performing PSU of a capacity under 1 kW, the new AX860 was made for you. It costs a lot, I know, but nothing good in this life comes for free, right?Ausführlicher Testbericht!
“There are certainly cheaper options on the market, but in this case you certainly get what you pay for.” “The pure modular design will prove popular with a wide audience of case modders who want to fine tune their cabling for ultimate appearance. The high grade 120mm Sanyo Denki fan is very quiet, even when dealing with a very high, active load.” “These are excellent power supplies, but to be perfectly honest we expect this now from Corsair, their overall standards in a wide cross section of sectors have been without reproach this year. Both AX760 and AX860 ship with a seven year warranty and they are clearly confident that these units are built to last.”Ausführlicher Testbericht!
For performance the 12, 3.3 and 5v results were all good with efficiency easily meeting the Platinum spec. Temperatures were good too with impressive AC Ripple readings also. The highlight is of however the unit's ability to run fanless up to 60% load which means for the majority of systems it will offer silent operation for the majority of tasks.Ausführlicher Testbericht!