SKU CW-9060007-WW/RF
Prozessorkühler Hydro Series™ H60 mit Kühlmittel (Refurbished)

79,99 € EUR

Mit Design der zweiten Generation bietet der Hydro Series™ H60 leistungsstarke, effiziente Prozessorkühlung. Der neu gestaltete Lüfter und flache Kühlkörper des H60 leiten Wärme schnell vom Prozessor ab, wenn es heiß hergeht.

NICHT MEHR VORRÄTIG

Umstieg auf Kühlmittel

Gamer können jetzt vom normalen CPU-Lüfter oder sperrigen Luftkühler auf einen effizienten und einfachen Prozessorkühler mit Kühlmittel umsteigen. Das Ergebnis sind eine erhöhte Kühlleistung und eine niedrigere Geräuschentwicklung und somit ein besserer Investitionsschutz für die CPU.

Fortschrittliches Lüfterdesign

Speziell angefertigte Flügel im 120-mm-Lüfter bieten ein besseres Verhältnis zwischen statischem Druck und Geräuschpegel und somit höhere Leistung bei geringerer Geräuschentwicklung.

Geschlossenes Kühlsystem

Das leistungsfähige System mit Kühlmittel für hochleistungsfähige Prozessoren braucht keine komplexen Leitungsanschlüsse. Der Hydro Series H60 ist ein vorgefülltes geschlossenes System, das niemals neu befüllt werden muss.

Werkzeugfreie magnetische Montagehalterungen für eine Vielzahl von Plattformen

Das modulare Design erleichtert die Installation und ist mit Intel® und AMD® Prozessoren kompatibel.

Hochdichte Leitungen mit großem Durchmesser

Hohe Lebensdauer dank minimalem Verdampfen des Kühlmittels, flexibles Design für hervorragenden Leckageschutz und einfache Installation auf engem Raum.

Kühlplatte aus Kupfer mit werkseitig aufgetragener Wärmeleitpaste

Dank seiner hohen Thermalleitfähigkeit ermöglicht Kupfer eine effiziente Wärmeabführung an den Verteiler. Weil die Wärmeleitpaste bereits aufgetragen ist, entfällt der Aufwand bei der Installation.

MEHR LADEN

VonEngadget

Beitrag vom  28. März 2013

H60 wins Gold award at Overclock3D.net!

“What we are saying though is that if you have got £60 to spend on cooling, you're up for a bit of overclocking fun, you fancy a bit of a dip into water cooling and you like your case to look open clean and sexy, then you owe it to yourself to have a bit of a gander at the Corsair H60.”

Ausführlicher Testbericht!

Von

Beitrag vom  12. Mai 2012

Hydro Series H60 wins 'Dam Good' award from Hardware Canucks!

The H60 “2.0” was everything we were hoping for from a refreshed Corsair product and then some. Everything from its noise levels to overall performance has been improved by leaps and bounds. Granted, the intergenerational performance jump isn’t extreme, but for $80 we’d be hard pressed to ignore it. "Much of the H60’s newfound strength comes from the custom Corsair SP120 running at its heart. Due to a high static pressure envelope this fan is able to push large amounts of air through the radiator without making an ungodly amount of noise. Coupled with larger tubing, an updated pump and a slightly revised radiator design, the SP120 brings Corsair’s H60 to the next level."

Ausführlicher Testbericht!

VonHardware Secrets

Beitrag vom  12. Juli 2012

H60 receives Recommended Award from Guru3D!

“The kit is very easy to install, 10 minutes tops really, and after connecting the two wires for powering up the fan and pump you are good to go. So there you have it you guys. I definitely like what the updated H60 has to offer, and that is very decent cooling performance and downright great looks for any PC. Definitely recommended.”

Ausführlicher Testbericht!

VonMetku

Beitrag vom  30. November 2012

Hydro Series H60 wins Silver award from Hardware Secrets.com

“The Corsair H60 is an excellent choice for anyone who wants to enter the liquid cooling world, as it is easy to install and fits virtually any case.”

Ausführlicher Testbericht!

Hydro H60 Spare Parts List


CW-8960004
Hydro Series H60/H80/H100 AMD Bracket Kit
CW-8960005
Hydro Series Fan Cable Extension Kit, 2x 12" 4 pin extender cables, H60 H80 H100

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.