Controlador de velocidad del ventilador y de iluminación RGB inteligente iCUE Commander PRO

64,90 € EUR

ADD TO CART

sku.pdpCL-9011110-WW
Controlador de velocidad del ventilador y de iluminación RGB inteligente iCUE Commander PRO

64,90 € EUR

CORSAIR iCUE Commander PRO convierte el chasis del PC en un chasis inteligente. Usa el software CORSAIR iCUE para conseguir una personalización alucinante de la iluminación RGB, un control preciso de la velocidad del ventilador y una supervisión acertada de la temperatura, todo desde un único dispositivo.


Compatible con CORSAIR iCUE

ACCESORIOS CORSAIR

COMMANDER PRO

EL CORAZÓN DE SU SISTEMA CON
CORSAIR iCUE

VER VÍDEO

CONVIERTA SU CHASIS EN UN CHASIS INTELIGENTE

CORSAIR Commander PRO le concede un control sin igual sobre la iluminación RGB y el rendimiento de su sistema. Reciba información completa sobre la temperatura del sistema en tiempo real y configure varias curvas de ventilación inteligentes para ajustar la velocidad automáticamente en función de las demandas del sistema.

Cree, personalice y sincronice impresionantes efectos de iluminación RGB conectando las tiras de iluminación y los ventiladores RGB CORSAIR para crear sorprendentes espectáculos de luz en todo el sistema. Gracias al software CORSAIR iCUE, CORSAIR Commander PRO es todo lo que necesita para convertir su chasis en un chasis inteligente.

CONECTE. DOMINE. CONTROLE.

CORSAIR Commander PRO controla hasta seis ventiladores del chasis y dos canales de iluminación RGB, con cuatro sensores de temperatura reposicionables y dos cabezales internos USB 2.0.

CONTROL DE VENTILACIÓN PRECISO

Controla hasta 6 ventiladores PWM de 4 patillas o DC de 3 patillas, e incluso permite ejecutar el modo de ventilación Zero RPM para disfrutar del silencio absoluto.

IMPRESIONANTE ILUMINACIÓN RGB PARA PC

Dos canales de iluminación RGB combinados con el potente software CORSAIR iCUE completan la personalización de las tiras LED RGB direccionables de forma individual y los ventiladores RGB de CORSAIR.

Alterne entre varios perfiles.

  • ESPIRAL ARCOÍRIS

  • Color intermitente

  • Cambio de color

  • Lluvia

  • Ola arcoíris

  • Visor

VIGILANCIA DE LA TEMPERATURA CON PRECISIÓN

Los cuatro sensores de temperatura reposicionables le permiten vigilar la temperatura con precisión en el chasis gracias al software CORSAIR iCUE, así como controlar la temperatura de la placa base, la tarjeta gráfica y la CPU. Configure curvas de ventilación personalizadas y perfiles de iluminación para ajustar la velocidad del ventilador y la iluminación RGB automáticamente cuando el sistema aumente o disminuya la temperatura.

CONECTE TODOS SUS DISPOSITIVOS USB

Los dos cabezales internos USB 2.0 le permiten conectar fácilmente dispositivos USB, como fuentes de alimentación compatibles con iCUE, refrigeradores líquidos para CPU o puertos USB del panel frontal de la placa base.

CONTROL INTELIGENTE, POSIBILIDADES ILIMITADAS

El potente software CORSAIR iCUE lo reúne todo y le permite controlar la iluminación RGB, supervisar las temperaturas del hardware y el refrigerante, y ajustar las velocidades del ventilador y la bomba; todo desde una única e intuitiva interfaz.

MÁS INFORMACIÓN

PERFIL BAJO Y FÁCIL INSTALACIÓN

Como mide 133 mm de ancho x 69 mm de largo y 15,5 mm de alto, el diseño bajo de Commander PRO y la superficie adhesiva incluida facilitan la instalación detrás de la placa base o en cualquier superficie plana del chasis.

CORSAIR Hydro X Series products are compatible with the following coolants:

Coolant Brand Coolant Model Recommendation
CORSAIR XL5 Performance Coolant Preferred
Aquacomputer Double Protect Ultra Compatible
Coolaboratory Liquid Coolant Pro Compatible
EK Cryofuel Compatible
Jingway Iceland X Compatible
Liquid.Cool CFX Opaque Compatible
Mayhems IDC Compatible
Mayhems Pastel Compatible
Mayhems X1 Compatible
Mayhems XT-1 Nuke Compatible
Mayhems XT-1 Compatible
Nanoxia Cooling Fluid Pro Compatible
Nanoxia Cooling Fluid Pro Opaque Compatible
Primochill TRUE. Compatible
Thermaltake C1000 Compatible
XSPC EC6 Compatible
XSPC ECX Compatible

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.



Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...



On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...



At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.



Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".

 
LOAD MORE
1x Commander PRO
2x RGB LED hub cables
4x Thermal sensors
4x Fan extension cables
2x Mounting tape
1x Installation guide