SKU CW-9060028-WW
Hydro Series™ H45 Liquid CPU Cooler

The Hydro Series™ H45 makes your PC run cooler and quieter when you replace your CPU’s stock heatsink.

Pásese al líquido

Su PC funcionará de manera más fría y silenciosa cuando reemplace el disipador térmico estándar de la CPU por Hydro Series H45. Instalación directa: si puedes acceder a la parte posterior de la placa base de su PC, puede instalar un H45. Solo necesita un destornillador. Los componentes compactos y los tubos flexibles del Hydro Series H45 facilitan su instalación incluso en espacios reducidos. Le permite mejorar la eficiencia de la refrigeración de la CPU incluso en los chasis más compactos. Siempre que el chasis tenga un montaje de ventilador de 120 mm, el H45 cabrá perfectamente.

Sistema de refrigeración autónomo

La buena refrigeración líquida para CPU de alto rendimiento ya no implica tener que pelearse con un sistema complejo. La gama Hydro Series H60 viene precargada y no es necesario recargarla ni purgarla.

Herramientas de goma con poca permeabilidad

La evaporación mínima del refrigerante ayuda a garantizar una mayor duración. La goma elástica ofrece una gran flexibilidad y una excelente protección contra fugas.

Bomba ultrafina

La bomba ofrece una circulación de alta velocidad sin ocupar mucho espacio. Esto facilita la instalación y ayuda a mejorar el flujo de aire por el chasis.

Placa refrigerante de cobre con compuestos térmicos preaplicados

El cobre tiene una conductividad térmica mejor para transferir el calor al colector de forma más eficiente. El compuesto térmico preaplicado le permite ahorrarse un paso de instalación bastante lioso.

CONTENIDO Y ESPECIFICACIONES



  • Package Contents

  • Hydro Series H45 Liquid CPU Cooler
  • Mounting Kit
  • Fan and Radiator Mounting Screws
  • Thermal Compound ( Pre-Applied)
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3
  • AMD™ sockets FM1, FM2, AM2, AM3

Especificaciones técnicas

  • Radiator Dimensions: 168.5mm x 120mm x 71mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2300 RPM
  • Fan airflow: 94 CFM
  • Noise level: 31 dBA
  • Fan static pressure: 3.65 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
168.5mm x 120mm x 71mm
Fan Dimensions
120mm x 25mm
Fan Speed
2300 RPM
Number of Fans
1
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan airflow
94 CFM
Noise level
31 dBA
Fan static pressure
3.65 mm-H2O
CARGAR MÁS

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.