sku.pdpCW-9060014-WW
Refrigerador líquido de CPU Hydro Series™ H110 de 280 mm de alto rendimiento

143,98 € EUR

El refrigerador líquido de CPU Hydro Series™ H110 de 280 mm proporciona una refrigeración de CPU silenciosa, eficaz y de alto rendimiento para carcasas que admiten un radiador de 280 mm.

FUERA DE STOCK

Refrigeración para CPU de rendimiento extremo con puntos de montaje para radiadores de 280 mm

El Hydro Series H110 es un refrigerador líquido de CPU integral que proporciona una refrigeración muy superior a la de los ventiladores de aire de CPU convencionales. La refrigeración líquida tiene un mejor rendimiento que la refrigeración por aire; además, el diseño integral del H110 facilita la protección de tu valiosa CPU.

Saca el máximo partido a tu montaje de radiador de 280 mm

Para lograr una refrigeración eficaz, cuanto más grande, mejor: se trata de física pura. Si la carcasa de tu PC admite radiadores de 280 mm, el Hydro Series H110 te proporcionará un mayor rendimiento. Los ventiladores de mayor diámetro ofrecen un mejor flujo de aire y menos ruido que la mayoría de los ventiladores de 120 mm, y el radiador de 280 mm cuenta con una superficie más amplia para una refrigeración más rápida.

Ventiladores de 140 mm de bajas revoluciones por minuto

Las aspas del ventilador de 140 mm incluido son más grandes que la mayoría de las aspas de los ventiladores de 120 mm, por lo que no necesitan girar más rápidamente para proporcionar el mismo flujo de aire; de este modo se reduce el ruido sin que el rendimiento se vea afectado..

Tubos de nueva generación

Los tubos flexibles de bajo nivel de evaporación garantizan la ausencia total de fugas.

Diseño avanzado de placa fría y colector

La placa fría utiliza cobre para proporcionar una excelente transferencia de calor y el colector está diseñado para ofrecer un flujo eficaz.

Soporte de montaje sencillo

El soporte de montaje para varias plataformas se adapta fácilmente a los procesadores Intel® y AMD™.

text.product.contentandspecification.title



  • Package Contents

  • Corsair Hydro Series H110 Extreme Performance Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two 140mm High Torque Fans
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Compatibility

  • Intel 115x, Intel 2011/2066
  • AMD AM3/AM2

text.product.contentandspecification.technicalspecifications.title

  • Radiator Dimensions: 140mm x 312mm x 29mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 1500 RPM
  • Fan Airflow: 94 CFM
  • Noise Level: 35 dBA
  • Fan Static Pressure: 1.64 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
Yes
CORSAIR iCUE Compatibility
No
Radiator Dimensions
140mm x 312mm x 29mm
Fan Dimensions
140mm x 25mm
Fan Speed
1500 RPM
Number of Fans
2
Cooling Socket Support
Intel 115x, Intel 2011/2066, AMD AM3/AM2
Lighting
None
Radiator Size
280mm
Fan Model
Standard
Fan Airflow
94 CFM
Noise Level
35 dBA
Fan Static Pressure
1.64 mm-H2O
LOAD MORE

ByPure Overclock

Posted on  28 de enero de 2013

Hydro Series H110 wins Madshrimps Performance award

If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.

Full Review!

ByHitech Legion

Posted on  31 de enero de 2013

Hydro Series H110 wins Gold award from OC3D!

“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”

Full Review!

ByHardware Heaven

Posted on  5 de abril de 2013

Hydro H110 wins Hardware Heaven Recommended award!

“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”

Full Review!

ByOverclock3D

Posted on  2 de abril de 2013

The Hydro H110 wins the Guru3D Top Pick award!

“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”

“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”

“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”

Full Review!

Hydro H110 Spare Parts List


CP-8920128
Hydro Series H90/H110 140MM Single Replacement Fans
CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to install CORSAIR AMD Bracket

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.