SKU CW-9060013-WW
Refrigerador líquido de CPU Hydro Series™ H90 de 140 mm de alto rendimiento

El refrigerador líquido de CPU Hydro Series™ H90 proporciona una refrigeración de CPU silenciosa, eficaz y de alto rendimiento para carcasas con una bancada para ventilador de 140 mm cerca de la CPU.

Refrigeración para CPU de alto rendimiento y poco ruido con puntos de montaje para ventiladores de 140 mm

El Hydro Series H90 es un refrigerador líquido de CPU integral de 140 mm que proporciona una mejor refrigeración con menos ruido que otros refrigeradores líquidos de primer nivel. La refrigeración líquida tiene un mejor rendimiento que la refrigeración por aire; además, el diseño integral del H90 facilita la protección de tu valiosa CPU.

Saca el máximo partido a tu bancada para ventilador de 140 mm

Para lograr una refrigeración eficaz, cuanto más grande, mejor: se trata de física pura. Si la carcasa de tu PC admite ventiladores de 140 mm, el Hydro Series H90 te proporcionará un mayor rendimiento. El ventilador de mayor diámetro ofrece un mejor flujo de aire y menos ruido que la mayoría de los ventiladores de 120 mm, y el radiador de 140 mm cuenta con una superficie más amplia para una refrigeración más rápida.

Tubos de nueva generación

Los tubos flexibles de bajo nivel de evaporación garantizan la ausencia total de fugas.

Diseño avanzado de placa fría y colector

La placa fría utiliza cobre para proporcionar una excelente transferencia de calor y el colector está diseñado para ofrecer un flujo eficaz.

Soporte de montaje sencillo

El soporte de montaje para varias plataformas se adapta fácilmente a los procesadores Intel® y AMD™.

CONTENIDO Y ESPECIFICACIONES




Especificaciones técnicas

  • Radiator Dimensions: 140mm x 170mm x 27mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 1500 RPM
  • Fan airflow: 94 CFM
  • Noise level: 35 dBA
  • Fan static pressure: 1.64 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
140mm x 170mm x 27mm
Fan Dimensions
120mm x 25mm
Fan Speed
1500 RPM
Number of Fans
1
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2
Lighting
None
Radiator Size
140mm
Fan Model
Standard
Fan airflow
94 CFM
Noise level
35 dBA
Fan static pressure
1.64 mm-H2O
CARGAR MÁS

Por Hardware-Test

Enviado el  31 de enero de 2013

Hydro H90 wins TechPowerUP! Highly Recommended award

“All in all, the Corsair Hydro Series H90 is a fantastic cooler that looks good and performs great. It even does so with the lowest noise output of all coolers tested to date. If a user needs good cooling while overclocking and does not wish to be bothered by noise, the Corsair Hydro Series H90 is a fantastic choice.”

Crítica completa

Por Tweak Town

Enviado el  28 de febrero de 2013

H90 wins Guru3D Top Pick award!

“The overall performance we think is really fine, and combined with the low noise levels the H90 easily gets our approval.”

Crítica completa

Hydro H90 Spare Parts List


CP-8920128
Hydro Series H90/H110 140MM Single Replacement Fans
CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.