SKU CW-9060019-WW
Refrigerador líquido para CPU de rendimiento extremo de 280 mm Hydro Series™ H110i GT

138,98 € EUR

El refrigerador líquido para CPU Hydro Series™ H110i GT cuenta con un radiador de 280 mm y dos ventiladores SP140L PWM que disipan eficazmente el calor generado por CPUs muy sobreaceleradas.


Compatible con CORSAIR iCUE

El radiador de 280 mm y dos ventiladores SP140L PWM disipan eficazmente el calor generado por CPU muy sobreaceleradas.

El Hydro Series H110i GT es un refrigerador integral para CPU de rendimiento extremo para chasis con puntos de montaje para radiadores de 280 mm. El radiador de 280 mm y dos ventiladores SP140L PWM disipan eficazmente el calor generado por CPU muy sobreaceleradas. Es compatible con CORSAIR iCUE, por tanto puede personalizar el rendimiento de la refrigeración, supervisar la temperatura del sistema y cambiar el color de la iluminación LED RGB.

Radiador de 280 mm

El secreto de una rápida y eficaz refrigeración es potenciar al máximo el área de superficie de refrigeración. Si el chasis para PC tiene dos puntos de montaje para ventiladores de 140 mm con espacio para un radiador de 280 mm, el H110i GT le permite sacar partido de todo el potencial de refrigeración del chasis.

Ventiladores SP140L PWM avanzados

Los ventiladores incluidos de 140 mm están diseñados de manera personalizada para un suministro de aire de alta presión estática con el mínimo ruido y turbulencia. Están controlados por PWM, por tanto puede personalizar la velocidad del ventilador para encontrar el equilibrio óptimo de refrigeración y ruido.

CORSAIR iCUE integrado

Conecte el cable de CORSAIR iCUE incluido a un puerto USB de la placa base y descargue el software gratuito CORSAIR iCUE Dashboard para liberar aún más potencia. Puede personalizar el rendimiento del refrigerador, supervisar las temperaturas de la CPU y del refrigerante, así como cambiar el color de la iluminación LED RGB desde el color blanco predeterminado para que combine con su sistema, o cambiar el color en función de las lecturas de la temperatura y otras entradas.

Una refrigeración más sencilla de la CPU de elevado rendimiento

El H110i GT es un diseño de circuito cerrado que viene prerrellenado. Incluye un soporte de montaje modular y que no precisa de herramientas para una instalación más rápida, y presenta un diseño mejorado de la placa refrigerante y de la bomba para una eficacia sumamente optimizada.

Acerca de los refrigeradores por líquido para CPU Hydro Series

Los refrigeradores de CPU Corsair Hydro Series le ofrecen la potencia de la refrigeración líquida en un paquete compacto fácil de instalar. Brindan una refrigeración superior para un rendimiento de overclocking elevado, sin la complejidad de los tradicionales módulos de refrigeración por agua.

Control inteligente. Posibilidades ilimitadas.

El software CORSAIR iCUE da vida a su sistema con una iluminación RGB dinámica sincronizada, una velocidad personalizable en los ventiladores para silenciarlos y una supervisión avanzada del sistema.

MÁS INFORMACIÓN

CONTENIDO Y ESPECIFICACIONES



  • Package Contents

  • Hydro Series H110i GT Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two SP140L High Torque 140mm Fans
  • USB cable for Corsair Link™ Integration
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011 and 2011-3
  • AMD™ sockets FM1, FM2, AM2, and AM3

Especificaciones técnicas

  • Radiator Dimensions: 140mm x 312mm x 27mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 2100 RPM
  • Fan airflow: 113 CFM
  • Noise level: 43 dBA
  • Fan static pressure: 3.99 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
Yes
Radiator Dimensions
140mm x 312mm x 27mm
Fan Dimensions
140mm x 25mm
Fan Speed
2100 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
RGB
Radiator Size
280mm
Fan Model
SP Series
Fan airflow
113 CFM
Noise level
43 dBA
Fan static pressure
3.99 mm-H2O
CARGAR MÁS

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.