Sistema de enfriamiento líquido para CPU H55 de Hydro Series™

96,68 € EUR

ADD TO CART

SKU CW-9060010-WW
Sistema de enfriamiento líquido para CPU H55 de Hydro Series™

96,68 € EUR

Hydro Series™ H55 es la fácil actualización del sistema de enfriamiento para su CPU Intel. El sistema de enfriamiento líquido integrado y eficaz es más silencioso y más eficiente que los ventiladores de los CPU, y el diseño compacto lo convierte en la opción ideal para las carcasas más pequeñas.

La fácil actualización de rendimiento para el CPU Intel

Su PC estará más fría y será más silenciosa durante el funcionamiento cuando reemplace el disipador estándar del CPU por un Hydro Series H55.

La instalación es simple: si puede llegar a la parte trasera del motherboard de su PC, podrá instalar un H55. Sólo necesita un destornillador.

Los componentes compactos y las tuberías flexibles facilitan la instalación de Hydro Series H55, incluso en espacios confinados. Le permite mejorar el rendimiento del sistema de enfriamiento de su CPU, incluso en la mayoría de las carcasas compactas, siempre y cuando la carcasa tenga un soporte para un ventilador de 120 mm

Sistema completamente integrado

Hydro Series H55 viene precargado y no es necesario recargarlo ni purgarlo.

Kit de placas de montaje sin uso de herramientas

El diseño modular facilita la instalación y es compatible con todos los procesadores Intel modernos.

Ventilador de 120 mm de baja velocidad y con bajo nivel de ruido

La baja velocidad y el amplio diámetro reducen los niveles de ruido por encima de los ventiladores más pequeños y rápidos que se utilizan en los sistemas de enfriamiento para CPU. El conector de tres clavijas es compatible con los controladores de los ventiladores.

Herramientas de caucho de bajo nivel de permeabilidad

La evaporación mínima de refrigerante ayuda a garantizar una vida útil prolongada y el caucho elástico ofrece una alta flexibilidad y una excelente protección contra fugas.

Bomba compacta

La unidad de la bomba ofrece una circulación de alta velocidad sin ocupar demasiado espacio. Esto facilita la instalación y ayuda a mejorar el flujo de aire de la carcasa.

Placa de contacto de cobre con micro-aletas de última generación con compuesto térmico aplicado anteriormente

El cobre tiene excelentes características de transferencia térmica y el diseño de las aletas se ha optimizado para lograr un intercambio de calor eficaz.

Intercambiador de calor compacto de aluminio negro

El diseño compacto reduce la exigencia de flujo de aire, que contribuye a que H55 sea más silencioso. El tamaño pequeño también facilita la instalación y mejora la compatibilidad, y el acabado de color negro se ve muy bien.

CONTENIDO Y ESPECIFICACIONES




Especificaciones técnicas

  • Radiator Dimensions: 120mm x 152mm x 27mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 1700 RPM
  • Fan airflow: 57 CFM
  • Noise level: 30.32 dBA
  • Fan static pressure: 1.9 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminium
PWM
NO
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 27mm
Fan Dimensions
120mm x 25mm
Fan Speed
1700 RPM
Number of Fans
1
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan airflow
57 CFM
Noise level
30.32 dBA
Fan static pressure
1.9 mm-H2O
CARGAR MÁS

Por Vortez.net

Enviado el  28 de enero de 2013

The Hydro Series H55 wins the Silver award from Vortez..net

“H55 is priced around £50, making it affordable to go down the ALC route without having to burn a hole in your pocket. At this price-point H55 offers a great alternative to air cooling.” “Corsair continue to impress even at the lower-end within the Hydro Series. H55 is affordable, good quality and offers a convenient alternative to bulky air cooling.”

Crítica completa

Hydro H55 Spare Parts List


CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.