Sistema de enfriamiento líquido para CPU H60 de Hydro Series™

125,97 $ USD

ADD TO CART

SKU CW-9060007-WW
Sistema de enfriamiento líquido para CPU H60 de Hydro Series™

125,97 $ USD

El diseño de segunda generación de Hydro Series™ H60 ofrece un sistema de enfriamiento para CPU potente y eficaz. El ventilador rediseñado y el radiador compacto permiten que H60 rápidamente elimine el calor de su CPU cuando le exige demasiado.

Sistema líquido

Cambie el ventilador estándar o aparato de ventilación de su CPU por el rendimiento y la sencillez de un sistema de enfriamiento líquido. Obtenga mejores resultados y un menor nivel de ruido al mismo tiempo que protege su inversión.

Ventilador de diseño avanzado

El ventilador tiene un tamaño de 120 mm e incorpora aspas especiales para una mejor presión estática y un menor nivel de ruido, lo que garantiza un mejor funcionamiento.

Sistema de enfriamiento integrado

Con el sistema de enfriamiento líquido de alto rendimiento óptimo para CPU ya no hay que lidiar con un sistema de tuberías complejo. Hydro Series H60 viene precargado y no es necesario recargarlo ni purgarlo.

Kit de placas de montaje magnético multiplataforma sin uso de herramientas

El diseño modular facilita la instalación y es compatible con los procesadores Intel® y AMD®.

Herramientas de diámetro amplio y bajo nivel de permeabilidad

La evaporación mínima de refrigerante ayuda a garantizar una vida útil prolongada y el diseño flexible le ofrece una mejor protección contra fugas y facilita la instalación en espacios reducidos.

Placa de contacto de cobre con compuesto térmico preaplicado

El cobre tiene una mejor conductividad térmica para lograr una transferencia de calor más eficaz hacia el múltiple. El compuesto térmico preaplicado le permite ahorrar un paso potencialmente complicado, en la instalación.

CONTENIDO Y ESPECIFICACIONES



  • Package Contents

  • Corsair H60 Liquid CPU Cooler
  • One 120mm fan
  • Mounting screws for fan and radiator
  • Mounting brackets for Intel™ LGA 115x/1136/2011 and AMD AM2/AM3/AM4/FM1/FM2
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1155, 1156, 1366, and 2011
  • AMD sockets AM2, AM3, AM4, FM1, and FM2

Especificaciones técnicas

  • Radiator Dimensions: 120mm x 152mm x 27mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2000 RPM
  • Fan airflow: 54 CFM
  • Noise level: 30.85 dBA
  • Fan static pressure: 2.36 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminium
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 27mm
Fan Dimensions
120mm x 25mm
Fan Speed
2000 RPM
Number of Fans
1
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan airflow
54 CFM
Noise level
30.85 dBA
Fan static pressure
2.36 mm-H2O
CARGAR MÁS

Por Engadget

Enviado el  28 de marzo de 2013

H60 wins Gold award at Overclock3D.net!

“What we are saying though is that if you have got £60 to spend on cooling, you're up for a bit of overclocking fun, you fancy a bit of a dip into water cooling and you like your case to look open clean and sexy, then you owe it to yourself to have a bit of a gander at the Corsair H60.”

Crítica completa

Por

Enviado el  12 de mayo de 2012

Hydro Series H60 wins 'Dam Good' award from Hardware Canucks!

The H60 “2.0” was everything we were hoping for from a refreshed Corsair product and then some. Everything from its noise levels to overall performance has been improved by leaps and bounds. Granted, the intergenerational performance jump isn’t extreme, but for $80 we’d be hard pressed to ignore it. "Much of the H60’s newfound strength comes from the custom Corsair SP120 running at its heart. Due to a high static pressure envelope this fan is able to push large amounts of air through the radiator without making an ungodly amount of noise. Coupled with larger tubing, an updated pump and a slightly revised radiator design, the SP120 brings Corsair’s H60 to the next level."

Crítica completa

Por Hardware Secrets

Enviado el  12 de julio de 2012

H60 receives Recommended Award from Guru3D!

“The kit is very easy to install, 10 minutes tops really, and after connecting the two wires for powering up the fan and pump you are good to go. So there you have it you guys. I definitely like what the updated H60 has to offer, and that is very decent cooling performance and downright great looks for any PC. Definitely recommended.”

Crítica completa

Por Metku

Enviado el  30 de noviembre de 2012

Hydro Series H60 wins Silver award from Hardware Secrets.com

“The Corsair H60 is an excellent choice for anyone who wants to enter the liquid cooling world, as it is easy to install and fits virtually any case.”

Crítica completa

Hydro H60 Spare Parts List


CW-8960004
Hydro Series H60/H80/H100 AMD Bracket Kit
CW-8960005
Hydro Series Fan Cable Extension Kit, 2x 12" 4 pin extender cables, H60 H80 H100

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to install CORSAIR AMD Bracket

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.