Refrigerante líquido Hydro Series™ H45 para CPU

54,90 € EUR

ADD TO CART

sku.pdpCW-9060028-WW
Refrigerante líquido Hydro Series™ H45 para CPU

54,90 € EUR

Hydro Series H45 hará que su PC esté mejor refrigerado y que sea más silencioso al reemplazar el disipador de calor de la CPU.

Pásese al líquido

Su PC funcionará de manera más fría y silenciosa cuando reemplace el disipador térmico estándar de la CPU por Hydro Series H45. Instalación directa: si puedes acceder a la parte posterior de la placa base de su PC, puede instalar un H45. Solo necesita un destornillador. Los componentes compactos y los tubos flexibles del Hydro Series H45 facilitan su instalación incluso en espacios reducidos. Le permite mejorar la eficiencia de la refrigeración de la CPU incluso en los chasis más compactos. Siempre que el chasis tenga un montaje de ventilador de 120 mm, el H45 cabrá perfectamente.

Sistema de refrigeración autónomo

La buena refrigeración líquida para CPU de alto rendimiento ya no implica tener que pelearse con un sistema complejo. La gama Hydro Series H60 viene precargada y no es necesario recargarla ni purgarla.

Herramientas de goma con poca permeabilidad

La evaporación mínima del refrigerante ayuda a garantizar una mayor duración. La goma elástica ofrece una gran flexibilidad y una excelente protección contra fugas.

Bomba ultrafina

La bomba ofrece una circulación de alta velocidad sin ocupar mucho espacio. Esto facilita la instalación y ayuda a mejorar el flujo de aire por el chasis.

Placa refrigerante de cobre con compuestos térmicos preaplicados

El cobre tiene una conductividad térmica mejor para transferir el calor al colector de forma más eficiente. El compuesto térmico preaplicado le permite ahorrarse un paso de instalación bastante lioso.


text.product.contentandspecification.technicalspecifications.title

  • Radiator Dimensions: 168.5mm x 120mm x 71mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2300 RPM
  • Fan Airflow: 94 CFM
  • Noise Level: 31 dBA
  • Fan Static Pressure: 3.65 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
Yes
CORSAIR iCUE Compatibility
No
Radiator Dimensions
168.5mm x 120mm x 71mm
Fan Dimensions
120mm x 25mm
Fan Speed
2300 RPM
Number of Fans
1
Cooling Socket Support
Intel 1150/1151/1155/1156 | Intel 2011/2066 | AMD AM3/AM2 | AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan Airflow
94 CFM
Noise Level
31 dBA
Fan Static Pressure
3.65 mm-H2O

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�
LOAD MORE
Hydro Series H45 Liquid CPU Cooler
Mounting Kit
Fan and Radiator Mounting Screws
Thermal Compound ( Pre-Applied)
Quick Start Guide