Introducing Commander PRO
Cooling and lighting control for a modern system can be convoluted and messy. One program controls your lighting, another controls your fans, and maybe even a third monitors your temperatures. Our CORSAIR LINK software and the new Commander PRO combine these features into a single device and software combo.
The Commander PRO is the key to controlling almost every aspect of your build’s cooling and lighting. You can monitor temperatures with the included thermistors, control PWM and DC fans, RGB LED strips, and even connect other CORSAIR LINK USB devices such as our intelligent power supplies and Hydro Series coolers with the integrated USB 2.0 HUB.
After unboxing the Commander PRO, you’ll notice that it’s surprisingly compact. Measuring in at 133mm x 69mm x 15.5mm with a single internal USB 2.0 cable and SATA power cable.
Taking a quick look at the Commander PRO’s onboard connections, you’ll notice the following:
2x RGB LED channel ports
4x Thermal sensor headers
6x 4-pin fan headers
2x USB 2.0 headers
Inside the Box
The Commander PRO includes the following:
2x RGB LED hub cables
4x Thermal sensors
5x Fan extension cables
2x pieces of mounting tape
Installing the Commander PRO is simple, find a flat surface inside your case and stick it in place with the included pieces of double-sided mounting tape. Make sure to plan ahead and pick a location that is reachable by all the fan and LED cables (the included fan extension cables provide added flexibility).
Once you have everything connected, you’ll see something like this screenshot when you launch CORSAIR LINK.
Just like the Lighting Node PRO, the Commander PRO unlocks a plethora of lighting effects that you can sync across your compatible LINK RGB devices, or you can control each device individually for wild effects.
All the classic modes are there, and as of Corsair LINK 4.7 (which you can download here) you’ll have access to:
After you’ve given your build some personality, you’ll want to dive right into temperature sensors and fan control. This is where the Commander PRO really shines.
Fans and Temps
Several preset fan curves can be chosen from to auto adjust fan speeds. However, you can also choose fixed RPM, fixed percentage, and a custom curve mode so you can have your fans set exactly where you want them.
For example, if you want a quiet system and your system temperature runs within acceptable limits, you can have the Commander PRO turn off all your system fans with a custom fan curve.
You can assign this curve to multiple fans with the “Copy to” buttons so if you want all your intake fans to dynamically spin up based on your GPU temperature, you can group this configuration to a thermal sensor and using the drop-down menu to the right, copy this configuration to the appropriate fans.
There’s no limit to the customization you can do. It’s your build, cool it how you want to.
In addition to all the onboard devices you can plug directly into the Commander PRO, there’s also an integrated USB 2.0 HUB so you can plug in other USB devices that would otherwise take up a USB header on your motherboard. This is especially handy if you want to have one of our intelligent power supplies or Hydro Series liquid cooler plugged into a single USB header.
Mapping out Your System
Once you have all your devices connected and configured, you can create a map of your system by going to the “Configure” tab in CORSAIR LINK. You’ll be able to pick an empty view of your chassis (with a selection of CORSAIR cases available to choose from) or you can upload your own image of your case.
You can then drag and drop items from the sidebar to the left to their appropriate position on your case image. You can see I went ahead and put my fans, temperature sensors, and lights all where they should be in my Vengeance C70.
The Commander PRO combines powerful fan controls and advanced lighting modes into a single device powered by CORSAIR LINK. The Commander PRO is available now and if you have any questions, feel free to ask us in the CORSAIR Forums.