Custom build for BoMenzzz
We were at the UK LAN-event Insomnia 61 together with Overclockers UK. We had one of our influencers there, BoMenzzz, and we teamed up with Bit-Techs inhouse modder Dave "davido_labido" Alcock to build a custom watercooled PC for BoMenzzz that was revealed at the event. In this blog Dave himself will show how he built this custom PC.
Hi folks, my name is Dave, but most people know me online as ‘davido_labido’. I have recently taken the role of an in-house computer modder at www.bit-tech.net. Which basically means I get to play with computer equipment and write about my experiences. Not a bad job huh?
The first build I decided to do for bit-tech.net was for Corsair and particularly its up and coming twitch streamer BoMenzzz. BoMenzzz recently managed to gain sponsorship from Corsair so she is doing very well. When I spoke to the Corsair rep, he mentioned that BoMenzzz had a bit of an ugly computer which wasn’t fit for a Twitch streamer! We decided something needed to be done. Her old computer was a nest of cables and looked rather messy, it was quite loud and just needed some TLC.
Working alongside Corsair and BoMenzzz we decided what hardware we needed and found that she wanted a white and pink colour scheme. The build would be liquid cooled to keep audio levels down. Alphacool kindly provided the liquid cooling. When all of the hardware arrived we knew it was going to be an interesting build!
First thing was to strip the case down to ensure that we could make the Corsair 460X as white as possible. I wanted to try and get a build as white as possible so that the pink would contrast against it. I did this by drilling out all of the rivets, it took a while, Corsair really like to ensure their cases stay together!
After the build was stripped down it looked a little like this; so many parts! Anything that was metal on the case, I popped along to the powder coaters just to save time.
Everything else I sprayed myself. This included all of the liquid cooling parts and plastic parts of the Corsair 460X. Here you can see the Alphacool radiator getting a blast of paint on my spray rack. The spray rack is a garden grow rack and is very cheap indeed. It ensures that wind and rain does not affect the spraying however.
To hide all of the holes in the motherboard tray that we didn’t want to see, I made a few acrylic plates. I had to then cut the holes that we wanted our cables to pass through. The holes that were cut started off very rough, like in the picture, but with a bit of filing and sanding they became smooth.
Now that everything was sprayed I could do a test fit and figure out how I was going to do the loop. I knew that everything was going to be a tight fit when I requested the hardware, I didn’t realise just how tight it was going to be though. There was less than an 8mm gap between the end of the GPU and the radiator!
Speaking of the graphics card, it really ruined the white and pink colour scheme, it just looked wrong. I do love the design of the MSI GPUs though, so I decided to spray it and do some other little mods. First of all we had to remove the red parts from the black surround.
Once this was done, we sanded, primed, sprayed and lacquered them all so that they were a nice bright pink. This suited the build far more and tied in all of the colours.
Next on the list of jobs was a set of custom sleeved cables. This meant measuring, cutting and sleeving all of the cables that would be seen. Some of these cables are ‘Y’ cables. This means that there is 1 cable at the motherboard end, but 2 cables at the PSU end. I got around this problem by creating some brand new ‘Y’ cables.
Once all of the cables were done they looked great. They were the perfect length for the look that I wanted and they were now white and pink!
As well as having a love for gaming, streaming and the colours white and pink, BoMenzzz really likes Pandas! I decided to try and sneak one into the build somewhere. The best place I could find was on the PSU cover that is included with the Corsair 460X.
When I was spraying the cooler for the MSI GPU, I decided to add a little bit of BoMenzzz branding. Using a vinyl cutter I created a little logo on the side that lights up.
I also created a really simple backplate out of some scrap acrylic and some vinyl.
Once the build was done, I filled it up with some Mayhems Pastel Pink. I think this colour is awesome in the Alphacool frosted tubing.
After it was all filled and everything was powered, it looked rather tasty! We decided to present BoMenzzz with the build at Insomnia 60, a UK gaming festival.
Needless to say, I think she was happy with it! Her PC garnered the most attention out of all the other builds at the event which was pretty awesome considering there was some other great builds there. It was a pleasure to work with Corsair, Alphacool and also BoMenzzz!
If you would like to check out BoMenzzz stream, click here: https://www.twitch.tv/bomenzzz
To check out a more detailed build log, check out our three-part series on Bit-Tech here: