BLOG

CORSAIR AIO LCD Connectivity Guide

Zadnje ažuriranje:

If you have our iCUE LINK TITAN II LCD or NAUTILUS II LCD, you'll see that they use DisplayPort to connect to your GPU. However, the number of available DisplayPort connectors can be limited, especially for those who have a multiple monitor setup. If this is a problem for you, there are a few options to get around this issue.

Use Integrated Graphics (if available)

If your CPU has integrated graphics, and your motherboard has a DisplayPort connection, then you can run the display from this. Refer to the table below to see if your CPU will work for this.

Brand / Generation Rule for iGPU Support
Intel Core Ultra (200S) Supported on all CPUs EXCEPT those ending in "F" or "KF" (e.g., 13700K has iGPU; 13700KF does not).
Intel Core (10th Gen – 14th Gen) Supported on all CPUs EXCEPT those ending in "F" or "KF". (e.g., 265K has iGPU; 265KF does not).
AMD Ryzen 7000 / 9000 (AM5) Supported on almost ALL standard CPUs (except rare "F" chips like 7500F).
AMD Ryzen 3000 / 4000 / 5000 (AM4) ONLY supported on models ending in "G", "GE", or "GT" (e.g., 5700G has iGPU; 5700X does not).

After verifying your CPU has integrated graphics, you just need to make sure your motherboard also has DisplayPort available. This will allow you to run the display and free up a connection on your GPU.

Use an Active HDMI to DisplayPort Converter

If you have a spare HDMI port on your GPU, then you can use this to run the display with a powered, active HDMI to DisplayPort converter. It must be an active powered converter (usually powered via USB).

We tested two of these: one powered by USB and one by USB Type-C and both worked flawlessly. So, if you have a spare HDMI output, don't want to reconfigure your monitor cables, and don't have a CPU with integrated graphics, this is a good solution.

Unlike most display connectors that can be converted with a passive adapter, converting HDMI to DisplayPort requires power. Something like this would work here. This is because HDMI and DisplayPort do not speak the same "language" natively, so there needs to be a chip in the adapter that requires power in order to "translate" between the two languages.

Consider Reconfiguring your Display Cables

Unless you're running multiple 4K monitors at 240Hz or a similarly rare ultra-enthusiast setup, you probably don't need to use DisplayPort for all your monitors.

Consider the resolution and refresh rate of your monitors and think about if they actually require the higher maximum bandwidth provided by DisplayPort. For example, if you have 2x 1440p 240Hz monitors, then you can run these displays with HDMI 2.1 without issue.

(Nvidia GPUs from the 30-series or later and AMD GPUs from the 6000-series or later use HDMI 2.1)

We've listed the max resolution and refresh rates you can achieve using HDMI below. If one of your monitors can hit its specs with HDMI, then you can swap it over, freeing up a DisplayPort connection on your GPU for your AIO display.

HDMI 2.1 Max Resolution and Refresh Rate

  • 1080p: Up to 240Hz+
  • 1440p: Up to 240Hz
  • 4K: Up to 120Hz native (full RGB 10/12-bit color without compression), and up to 144Hz–240Hz using Display Stream Compression (DSC)
  • 8K: Up to 60Hz native (or higher refresh rates utilizing DSC)
  • 10K: Up to 100Hz–120Hz support

PROIZVODI U ČLANKU

Stay up to date with CORSAIR. Get our latest News, Guides, and Product Updates in your Google feeds.

Add CORSAIR as a preferred source

JOIN OUR OFFICIAL CORSAIR COMMUNITIES

Join our official CORSAIR Communities! Whether you're new or old to PC Building, have questions about our products, or want to chat about the latest PC, tech, and gaming trends, our community is the place for you.

Was this article helpful?