OBSAH BALENIA
ZOZNÁMENIE SA S NÁHLAVNOU SÚPRAVOU
BEZDRÔTOVÝ REŽIM RF
PC - Pripojte bezdrôtový vysielač USB k ľubovoľnému portu USB (typ A) na počítači. Stlačte tlačidlo napájania na náhlavnej súprave. Náhlavná súprava sa predvolene zapína v bezdrôtovom RF režime. Náhlavná súprava je navrhnutá na prevádzku v dosahu do 15,24 m (50 stôp) od vysielača, ale výkon môžu ovplyvniť iné bezdrôtové zariadenia, elektronika a prekážky, napríklad steny.
POZNÁMKA: Pri prvom použití náhlavnej súpravy CORSAIR HS80 MAX WIRELESS na počítači operačný systém automaticky nainštaluje ovládač zariadenia. Po nainštalovaní ovládača zariadenia odporúčame pred použitím reštartovať počítač.
PLAYSTATION - Pripojte bezdrôtový vysielač USB k ľubovoľnému portu USB na konzole PS4 alebo PS5. Pomocou používateľského rozhrania PlayStation nastavte položku "Output to Headphones" (Výstup do slúchadiel) na "All Audio" (Všetky zvuky). Nastavte ovládanie hlasitosti (slúchadlá) na maximálnu úroveň. Potom upravte hlasitosť pomocou ovládača hlasitosti slúchadiel.
REŽIM BLUETOOTH
With the headset powered on, enable pairing by holding the MFB until the status LED rapid blinks red and blue. When the headset is paired, the status LED will blink blue. Quick press the power button to toggle between RF wireless and Bluetooth modes. When the headset is in RF wireless mode the status LED will blink red, orange or green depending on the current battery level. Note when the headset is in RF wireless mode and paired via Bluetooth with a mobile phone, it will only accept and receive phone calls. Quick press the power button to enter Bluetooth mode and enable both phone calls and Bluetooth audio (such as when listening to music). The headset will default to the last mode it was set to when turned off.
The headset can connect to simultaneous RF and Bluetooth.
The very first time you turn on your headset, Bluetooth pairing mode is automatically enabled for you to help you easily connect your Bluetooth device. If no device is connected after some time, the headset will exit Bluetooth pairing mode automatically.
To manually enable pairing mode for your Bluetooth device at a later time, turn on the headset and then hold the BT multifunction button for 2 seconds until the Microphone LED blinks red and blue. Upon pairing a Bluetooth device to your headset, powering on the headset will now also automatically turn on Bluetooth and connect to the paired device. Powering off the headset will turn off all wireless connections.
PRIJÍMANIE A UKONČOVANIE TELEFONICKÝCH HOVOROV
Ak chcete prijať prichádzajúci hovor, stlačte jedno tlačidlo MFB. Ak chcete ukončiť hovor, znova stlačte MFB.
POČÚVANIE HUDBY (PREHRÁVANIE MÉDIÍ)
Ak chcete prehrať skladbu, stlačte tlačidlo MFB. Ak chcete pozastaviť prehrávanie, znova stlačte tlačidlo MFB. Ak chcete preskočiť dopredu, dvakrát rýchlo stlačte tlačidlo MFB. Ak chcete preskočiť dozadu, stlačte MFB trikrát rýchlo.
PRE OPTIMÁLNY BEZDRÔTOVÝ VÝKON
POZNÁMKA: Dlhodobé počúvanie pri vysokej hlasitosti môže mať nepriaznivý vplyv na váš sluch. Medzi jednotlivými sedeniami si robte prestávky a pred zvýšením hlasitosti vždy začnite s nízkou úrovňou.
iCUE
Go to corsair.com/support/downloads to download the iCUE Software. Using iCUE software will enable the full feature set of the HS80 MAX WIRELESS headset. The USB Wireless Receiver must be connected to your PC to use iCUE software.
NOTE: If the headset is used without software, some features will be disabled.
iCUE SOFTWARE CAN BE USED TO:
The software’s built-in documentation explains how to use the HS80 MAX WIRELESS’s features in greater detail.
Go to corsair.com/support/downloads to download the iCUE Software. Using iCUE software will enable the full feature set of the HS80 MAX WIRELESS headset. The USB Wireless Receiver must be connected to your PC to use iCUE software.
NOTE: If the headset is used without software, some features will be disabled.
iCUE SOFTWARE CAN BE USED TO:
The software’s built-in documentation explains how to use the HS80 MAX WIRELESS’s features in greater detail.
OVLÁDANIE MIKROFÓNU
Výklopný mikrofón na stlmenie zvuku. Odklopením mikrofónu zrušíte stlmenie.
POZNÁMKA: Na ovládanie týchto funkcií možno použiť aj softvér iCUE.
Aby ste dosiahli čo najlepší výkon, ohnite flexibilné rameno mikrofónu tak, aby čo najlepšie priliehalo k ľavému kútiku úst. Pre začiatok je vhodné ohnutie o 30 stupňov, ale ak je mikrofón príliš hlasný alebo príliš tichý, môžete ho upraviť.
OVLÁDANIE HLASITOSTI
Pomocou ovládacieho kolieska hlasitosti/EQ select môžete upraviť hlasitosť nahor alebo nadol. Okrem toho stlačením kolieska hlasitosti cyklicky prepínate štyri predvoľby ekvalizéra zvuku.
NABÍJANIE
Headset CORSAIR HS80 MAX WIRELESS musí byť pred prvým použitím úplne nabitý.
Batéria náhlavnej súpravy CORSAIR HS80 MAX WIRELESS nemá "pamäťový efekt", takže nie je potrebné ju pred nabíjaním úplne vybiť. Nezabudnite, že nabíjací kábel USB vyžaduje vysoko výkonný port (USB 2.0 alebo lepší). Niektoré porty USB, ktoré sa nachádzajú v starších zariadeniach, nepodporujú USB 2.0.
INDIKÁCIA STAVU BATÉRIE (NA NÁHLAVNEJ SÚPRAVE)
| NÍZKY | MEDIUM | HIGH |
| ČERVENÁ | ORANGE | ZELENÁ |
Počas nabíjania bude stavová LED dióda pulzovať a pri plnom nabití bude svietiť na zeleno. Keď sa nenabíja, stavová LED dióda bude blikať na základe vyššie uvedených úrovní výkonu.
INDIKÁCIA STAVU BEZDRÔTOVÉHO PRIPOJENIA (NA BEZDRÔTOVOM USB PRIJÍMAČI)
INFORMÁCIE O VYBRATÍ BATÉRIE
Tento výrobok používa nabíjateľnú batériu a v prípade, že je výrobok znefunkčnený, je potrebné dodržiavať bezpečnostné pokyny na jeho likvidáciu a recykláciu. Ak chcete bezpečne vybrať batériu na likvidáciu a recykláciu, postupujte podľa očíslovaných krokov s nižšie uvedenými schémami.
Spoločnosť CORSAIR MEMORY, Inc. vyzýva zákazníkov, aby recyklovali použitý elektronický hardvér a nabíjateľné batérie v súlade s miestnymi zákonmi a predpismi.
The power delivered by the charger must be between min 0.025 Watts required by the radio equipment, and max 2.15 Watts in order to achieve the maximum charging speed.
COPYRIGHT / LEGAL INFORMATION
DOLBY LABORATORIES
Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
FCC ID: 2AAFMRDA0047 (Headset)
FCC ID: 2AAFMRDA0048 (Receiver)
FCC ID: 2AAFM-RDA0056 (Headset)
FCC ID: 2AAFM-RDA0057 (Receiver)
IC: 10954A-RDA0047 (Headset)
IC: 10954A-RDA0048 (Receiver)
IC: 10954A-RDA0056 (Headset)
IC: 10964A-RDA0057 (Receiver)
© 2023-2025 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.