MANUAL | QUICK START GUIDE
CORSAIR iCUE LINK SYSTEM HUB 3rd GEN
iCUE LINK ECOSYSTEM CONTROL CENTER
BEFORE YOU START
NOTE: Update iCUE to version 5.37 or higher, and the iCUE LINK System Hub to version 3.11.646 or higher. Both are required for proper operation and control of iCUE LINK devices.
GETTING TO KNOW YOUR SYSTEM HUB
PACKAGE CONTENTS
1x iCUE LINK System Hub
1x iCUE LINK Cable, 600mm
1x iCUE LINK Cable, 135mm
1× USB-C to USB 2.0 Cable, 500 mm
2x Double-sided Tape
SYSTEM HUB INSTALLATION
CONNECT THE SYSTEM HUB TO USB AND POWER
Connect a 6-pin PCIe power cable from the power supply unit (PSU) to the power input (B) of the iCUE LINK System Hub (1).
- Connect the USB Cable (4) into the USB input (C) of the iCUE LINK System Hub (1).
- Connect the 9-pin USB 2.0 connector (4) into a USB 2.0 header on the motherboard.
CONNECT THE TACH CABLE (OPTIONAL) AND iCUE LINK DEVICES
- If you are using an iCUE LINK CPU Cooler, connect the 2-pin, 1-wire Tach cable into the Tach output (D) on the System Hub. Then, connect the 3-pin connector to the CPU_FAN header on the motherboard.
- Connect your iCUE LINK devices to the System Hub (1) using the provided iCUE LINK cables (2, 3). Use one of the two iCUE LINK ports (A) of the System Hub (1) for this connection.
WARRANTY
iCUE LINK System Hub has a 2-year warranty.
LEGAL
© 2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.
POWER RATING
System Hub Output rating: 12Vdc 7A (per port)