SKU CW-9060015-WW
Refroidisseur liquide pour processeurs Hydro Series™ H75

94,90 € EUR

Le modè,le H75 de la gamme Hydro fournit un refroidissement liquide effectif et efficace du processeur dans un format compact. Par souci de compatibilité, avec un plus grand nombre de boî,tiers, le radiateur de 120 mm affiche une hauteur de seulement 25 mm, et le double ventilateur une commande PWM pour des performances de refroidissement adaptables. Le support de fixation universel sans outil prend en charge la majorité, des cartes-mè,res Intel et AMD.

ÉPUISÉ

Un radiateur fin de 25 mm et un double ventilateur PWM pour un refroidissement liquide compact et personnalisable du processeur

Le modèle H75 de la gamme Hydro fournit un refroidissement liquide effectif et efficace du processeur dans un format compact. Le radiateur de 120 mm affiche une épaisseur de seulement 25 mm. Il est couplé à un tubage résistant au pliage de diamètre standard à des fins de compatibilité avec les petits boîtiers et les espaces restreints. Le double ventilateur de 120 mm SP120L est compatible avec les raccordements de ventilateur des cartes-mères PWM. Ainsi, ces dernières contrôlent automatiquement la vitesse du ventilateur en fonction de la température du processeur. Le système de fixation sans outil offre une compatibilité importante avec les socles de connexion Intel et AMD. Une plaque de refroidissement en cuivre Microfin et une pompe sur roulements en céramique de haute qualité fournissent un transfert thermique faible et peu bruyant qui éloigne la chaleur de votre processeur. Et, à l'instar de tous les refroidisseurs liquides de processeurs de la gamme Hydro, le H75 est totalement autonome et ne requiert aucun remplissage, ni aucune maintenance.

Plaque de refroidissement en cuivre Microfi

La plaque de refroidissement extrait la chaleur de votre processeur pour l'envoyer dans le liquide en circulation. Le cuivre possède une conductivité thermique exceptionnelle et la conception Microfin offre un transfert thermique rapide et efficace.

Radiateur de 25 x 120 mm

Une épaisseur de 25 mm combine une importante surface de refroidissement à un profil mince idéal pour les petits boîtiers ou les installations dont l'espace est compté.

Double ventilateur PWM 120 mm à couple élevé

Les deux ventilateurs sont installés de chaque côté du radiateur pour un flux d'air entrant/sortant à haut débit. Vous pouvez les raccorder aux connecteurs de ventilateur PWM standard de votre carte-mère, pour un contrôle précis du régime de ventilation, et sélectionner précisément le degré exact de refroidissement dont vous avez besoin.

Compatibilité étendue avec les socles de connexion Intel® et AMD®

Le modèle H75 de la gamme Hydro fonctionne avec la quasi-totalité des cartes mères compatibles Intel et AMD actuelles.

Pompe à roulements en céramique haute qualité

Le mécanisme de la pompe est fiable et conçu pour le silence.

Installation du support sans outil

L'intégralité du matériel de fixation est fournie. L'installation est plus simple ; inutile d'aller à la chasse au tournevis.

CONTENU ET CARACTÉRISTIQUES




Caractéristiques techniques

  • Radiator Dimensions: 120mm x 152mm x 25mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2000 RPM
  • Fan airflow: 54 CFM
  • Noise level: 31.4 dBA
  • Fan static pressure: 2.8 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 25mm
Fan Dimensions
120mm x 25mm
Fan Speed
2000 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
SP Series
Fan airflow
54 CFM
Noise level
31.4 dBA
Fan static pressure
2.8 mm-H2O
CHARGER PLUS

Hydro H75 Spare Parts List


CO-8950012
Corsair Fan SP120L 2000 RPM, 53.61 CFM, 120mm x 25mm, PWM, Single Pack H75 Replacement Fan
CW-8960017
Hydro Series H75 H105 Intel LGA 1150, 1155, 1556, 1366, 2011 Mounting Bracket Kit
CW-8960018
Hydro Series H75 H105 AMD AM2, AM3, FM1, FM2 Mounting Bracket Kit
CW-8960019
Hydro Series H75 H105 Fan Y-Header Cable

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.