SKU CO-9050004-WW
Lot de deux ventilateurs à forte circulation d’air Air Series AF120 Performance Edition de 120 mm

32,90 € EUR

Avec les ventilateurs Air Series AF120, vous avez tout ce qu’il vous faut. Les neuf pales ultra-fines fabriquées sur mesure brassent un volume d'air élevé. Le cadre en caoutchouc, quant à lui, absorbe les vibrations avec une efficacité redoutable.

Fan Size
Package Quantity
ÉPUISÉ

Forte circulation de l’air pour un refroidissement grand volume rapide et efficace

Les modèles de ventilateur de boîtier Air Series AF fonctionnent parfaitement dans les espaces non restreints, avec une garde d’au moins 3 cm. Ils constituent la solution d’évacuation idéale pour un montage sur le dessus ou à l’arrière de votre boîtier PC afin d’empêcher cartes-mères, processeurs, accélérateurs graphiques et autres composants d’accumuler l’air chaud dans le boîtier. Ils fonctionnent également parfaitement en tant que ventilateurs aspirants non restreints, notamment sur les panneaux latéraux ou les prises d’air de fond de boîtier.

Pour les zones fortement restreintes, telles que les cages à disques et autres espaces étroits, où le volume d’air est moindre, découvrez les modèles de ventilateurs Air Series SP à forte pression statique.

Performances

AF120 Performance Edition AF120 Quiet Edition
Format 120 x 25 mm 120 x 25 mm
Tension de fonctionnement 7 – 12 V 7 – 12 V
Performances à 12 V Performances à 12 V
Flux d’air 63,47 CFM 39,88 CFM
Pression statique 1,1 mmH2O 0,5 mmH2O
Niveau sonore 30 dBA 21 dBA
Vitesse 1 650 tr/min 1 100 tr/min
Consommation 0,13 A 0,08 A

CONTENU ET CARACTÉRISTIQUES



  • Package Contents

  • x2 AF120 Performance Edition Fan
  • Three colored rings in red, blue, and white
  • Mounting Screws
  • Voltage step-down adapter for lower speed operation

Fan Warranty
Two years
Fan Size
120mm x 25mm
Bearing Type
Sleeve
Fan Type
Performance Edition
Flow Type
Airflow
LED Color
None
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR iCUE Compatibility
NO
Fan Model
AF Series
Package Quantity
Twin Pack
Speed
1650 RPM
Sound Level
30 dBA
Power Draw
0.13 A
Static Pressure
1.1 mmH20
Fan Airflow
63.47 CFM
CHARGER PLUS

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�