Gamme Air - Ventilateur haut débit 140 mm blanc à LED AF140 Quiet Edition

15,90 € EUR

ADD TO CART

SKU CO-9050017-WLED
Gamme Air - Ventilateur haut débit 140 mm blanc à LED AF140 Quiet Edition

15,90 € EUR

Les ventilateurs de boîtier PC haut débit à LED de la gamme CORSAIR combinent efficacité, silence et esthétique lumineuse.

LED Color
Fan Size

Éclairage par LED et performances de refroidissement élevées

Les ventilateurs de boîtier PC haut débit à LED de la gamme Corsair combinent efficacité, silence et esthétique lumineuse. Les pales moulées sur mesure sont conçues pour une alimentation à haut débit d'air, avec moins de bruit et de turbulences que les ventilateurs de boîtier standard. Une conception translucide et une texture glacée confèrent à l'éclairage des quatre LED un effet spectaculaire.

Optimisé pour un refroidissement à haut volume et haut débit d'air

Les modèles de ventilateur AF de la gamme Air fonctionnent parfaitement dans les espaces non restreints, avec une garde d'au moins 3 cm. Ils constituent la solution d'évacuation idéale pour un montage sur le dessus ou à l'arrière de votre boîtier PC afin d'empêcher cartes-mères, processeurs, accélérateurs graphiques et autres composants d'accumuler l'air chaud dans le boîtier. Ils fonctionnent également parfaitement en tant que ventilateurs aspirants non restreints dans des zones telles que les panneaux latéraux ou le fond du boîtier.

Pour les zones fortement restreintes, telles que les cages à disques et autres espaces étroits, où le volume d'air est moindre, découvrez les modèles de ventilateurs SP à forte pression statique de la gamme Air.

Des performances plus élevées que celles des ventilateurs de boîtier standard

Les modèles de ventilateurs AF de la gamme Air sont conçus pour surclasser les ventilateurs de boîtier standard. Les pales sont moulées sur mesure pour un flux d'air optimal. Elles sont également ultra-fines pour réduire le bruit et les turbulences. Le système de roulements gainés diminue les vibrations pour un fonctionnement silencieux.

Performances

Modèle AF120 Quiet Edition à LED Modèle AF140 Quiet Edition à LED
Cotes 120mm x 25mm 140mm x 25mm
Tension de fonctionnement 7V - 12V 7V - 12V
Performances à 12 V Performances à 12 V
Débit d'air 52.19 CFM 66.4 CFM
Pression statique .75 mmH20 .80 mmH20
Niveau sonore 25.2 dBA 25.5 dBA
Vitesse 1500 RPM 1200 RPM
Consommation électrique 0.40 A 0.23 A

CONTENU ET CARACTÉRISTIQUES



  • Package Contents

  • x1 Air Series AF140 LED Quiet Edition High Airflow 140mm Fan
  • Mounting Screws
  • Warranty leaflet

Fan Warranty
Two years
Fan Size
140mm x 25mm
Bearing Type
Sleeve
Fan Type
Quiet Edition
Flow Type
Airflow
LED Color
White
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR LINK compatibility
NO
Fan Model
AF Series
Package Quantity
Single Fan
Speed
1200 RPM
Sound Level
25.5 dBA
Power Draw
0.23 A
Static Pressure
.80 mmH20
Fan Airflow
66.4 CFM
CHARGER PLUS

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.