MANUAL | QUICK START GUIDE

SABRE v2 PRO WIRELESS CF

CARBON FIBER GAMING MOUSE

SABRE_v2_PRO_WIRELESS_CF_TOP_1800X1325

CHARGING THE MOUSE

IMPORTANT: The SABRE v2 PRO WIRELESS CF must be fully charged before its first use. Please update firmware via CORSAIR WEB HUB for the best experience.

Connect the mouse to an available USB 2.0 or 3.X port on your PC with the USB CHARGING / DATA CABLE (L).

The lights under the MIDDLE CLICK / SCROLL WHEEL (C) on the mouse will light up according to the battery status and will turn solid green when charging is complete.

GETTING TO KNOW YOUR MOUSE

SABRE_v2_PRO_WIRELESS_CF_info
  1. LEFT MOUSE BUTTON
  2. RIGHT MOUSE BUTTON
  3. MIDDLE CLICK / SCROLL WHEEL
  4. FORWARD BUTTON
  5. BACK BUTTON
  6. MARKSMAN S OPTICAL SENSOR
  7. USB CHARGING / DATA PORT
  8. 100% VIRGIN-GRADE UPE MOUSE SKATES
  9. POWER / WIRELESS MODE SWITCH
  10. DPI & BLUETOOTH PAIRING BUTTON (3 SEC)
  11. USB WIRELESS RECEIVER
  12. USB CHARGING / DATA CABLE

SETTING UP 2.4GHz WIRELESS

  • Connect the USB WIRELESS RECEIVER (K) to the USB CHARGING / DATA CABLE (L), plug the other side of the cable to an available USB 2.0 or 3.x port located on the front panel of your PC or nearby USB port.
  • Power on your mouse by switching the POWER / WIRELESS MODE SWITCH (I) to 2.4GHz wireless.
  • The LED indicator under the MIDDLE CLICK / SCROLL WHEEL (C) will turn solid green when successfully connected to the receiver.

SETTING UP BLUETOOTH

Bluetooth wireless is best for everyday computing tasks, productivity, and office applications.

  • Initiate Bluetooth pairing on your Bluetooth 4.0 or higher enabled device.
  • Power on your mouse by switching the POWER / WIRELESS MODE SWITCH (I) to Bluetooth.
  • The LED indicator under the MIDDLE CLICK / SCROLL WHEEL (C) will blink blue and turn solid blue when connected.
  • If the BT pairing device needs to be re-paired or changed, switch the BT mode first. Hold down the DPI & Bluetooth Pairing Button (J) for 3 seconds or until the LED indicator starts blinking blue to enter BT pairing mode.

*SABRE v2 PRO WIRELESS CF can only be paired to one device. If you need to pair with another device, please enter re-pairing mode to initialize the pairing process.

CYCLING THROUGH DPI PROFILES

DPI cycling is available for fast configuration.

  • Press the DPI & BLUETOOTH PAIRING BUTTON (J) once to switch to next DPI stage.
  • When switching to the corresponding DPI level, the indicator light on the mouse wheel will flash 3 times for the corresponding DPI color and then turn off.
  • Repeat the above steps to switch to the next DPI stage. It will cycle through 5 DPI stages and return to Stage 1.

Advanced configurations are available via CORSAIR WEB HUB.

WEB_HUB_Logo_RGB

MOUSE STATUS AND INDICATIONS

Wireless connection and battery status are communicated through the lights under the MIDDLE CLICK/SCROLL WHEEL (C).

 

DPI STATUS - PREDEFINED LED INDICATOR 
STAGE 1 - 400 RED
STAGE 2 - 800 BLUE
STAGE 3 - 1200 GREEN
STAGE 4 - 1600 YELLOW
STAGE 5 - 2000 PURPLE

 

BATTERY STATUS LED INDICATOR
BATTERY CHARGING WHEN LOW BREATHING RED
BATTERY CHARGING WHEN MEDIUM BREATHING GREEN
BATTERY FULL SOLID GREEN
BATTERY CRITICAL, RECHARGE REQUIRED BREATHING RED

 

STEP-BY-STEP MOUSE SETUP GUIDE

Step 1 – Connect Your SABRE v2

  1. Plug in the SABRE v2 PRO WIRELESS CF’s receiver via Type-C.
  2. Make sure the power switch on the mouse is set to 2.4 GHz.

Step 2 – Open CORSAIR WEB HUB and Select the Mouse

  1. Go to http://www.corsair.com/web-hub/index.html
  2. Click [Authorize].
  3. Choose SABRE v2 PRO WIRELESS CF receiver.
SABRE_v2_PRO_WL_CF_receiver

Step 3 – Create or Select a Profile

  1. At the top-left, open the profile dropdown Menu.
  2. Click the profile you want to edit (for example: “Profile 1”).
  3. This profile will store your DPI, and button assignments.
SABRE_v2_PRO_WL_CF_step3_profile

Step 4 – Set DPI Levels

  1. Click [DPI] in the left sidebar.
  2. Choose how many DPI stages you want(1~5).
  3. Enable the DPI stages you want to use (for example, 800 / 1200 / 1600).
    Recommended starting DPI:
    • Desktop/general: 1200–1600 DPI
    • FPS games: 800–1200 DPI
    • MOBA/MMO: 1600–2400 DPI.
SABRE_v2_PRO_WL_CF_step4_dpi

Step 5 – Remap Buttons (Actions / Key Assignments)

  1. Click [Key Assignments] in the left sidebar.
  2. Click the button on the mouse diagram you want to change.
  3. Choose the Assignment Type:
    • Keyboard (remap to a key like R, E, or P)
    • Macro (record multiple keystrokes)
    • etc
  4. Confirm the assignment and test it.
SABRE_v2_PRO_WL_CF_step5_remap

Step 6 – Set Macro Manager

  1. Click [Macro manager] in the left sidebar.
  2. Click [ + ] to add a new Macro (For example: “Profile 1”).
  3. Click [Record Macro] on the right.
  4. Press the keyboard keys or mouse events you want to record.
  5. Click [Record Macro] again to stop recording.
SABRE_v2_PRO_WL_CF_step6_macro

Step 7 – Insert Macro events manually

  1. Click [Macro manager] in the left sidebar.
  2. Choose the Macro you want to edit.
  3. At the insert event bar, choose whether you want to insert keyboard or mouse events with the first dropdown menu.
  4. Choose the event you want to insert with the second dropdown menu.
  5. Click [Insert].
SABRE_v2_PRO_WL_CF_step7_macro

Step 8 – Device setting

  1. Click Device Setting at bottom left.
  2. Device Settings.
    1. Battery – Wireless connectivity or battery status.
    2. Polling Rate – Select [ 1000 Hz / 1 msec ] polling for 1000Hz polling.
    3. Sleep Time – Adjust time after mouse transitions to Sleep Mode.
    4. Motion Sync – Aligns mouse movement data with USB polling intervals to deliver more consistent and stable cursor tracking.
    5. Lift Height – Sensor cut off height.
    6. Angle Snapping – Smooths out mouse movement via sensor prediction when ON.
    7. Ripple Control – Smooths mouse movement by filtering out small, unintended jitter at the cost of slightly reduced raw input precision.
    8. Pair Wireless receiver – Pair or reset the wireless receiver.
    9. Reset Device Default – Reset your SABRE v2 PRO WIRELESS CF to default setting.

Step 9 – Update firmware

  1. Click [Device Setting] at bottom left.
  2. Click [Check for Updates] to ensure you are running the latest device firmware.
  3. Follow the steps to update the firmware if needed.
SABRE_v2_PRO_WL_CF_step9_firmwareupdate

Step 10 – Pair wireless receiver

  1. Click [Device Setting] at bottom left.
  2. Click [Pair].
  3. Follow the steps to pair the USB receiver.
SABRE_v2_PRO_WL_CF step9_pairing

BATTERY REMOVAL INFORMATION

This product uses a rechargeable battery and safety guidelines must be followed in the event that the product is disabled for disposal and recycling. To safely remove the battery for disposal and recycling, follow the numbered steps with the below diagrams.

SABRE_v2_PRO_WIRELESS_CF_BatteryRemoval_V2
  1. Remove feet x2
  2. Remove screws x4
  3. Disassemble top case sub assy
  4. Remove battery

CORSAIR MEMORY, Inc. encourages customers to recycle used electronic hardware and rechargeable batteries in accordance with local laws and regulations.

BATTERY INFORMATION

  • M/N (型號): TW 602030
  • Capacity (電池容量): 3.7V, 300mAh, 1.11Wh
  • Scan QR code for battery details
SABRE_v2_PRO_WIRELESS_CF_BATTERY_QRCODE

Mouse
M/N (型號): RGP0184
Rating(電壓電流): 5V 400mA
Receiver
M/N(型號): RGP0185
Rating(電壓電流):  5V 50mA

FCC ID: 2AAFM-RGP0184 (Mouse)
FCC ID: 2AAFM-RGP0185 (Receiver)
IC: 10954A-RGP0184 (Mouse)
IC: 10954A-RGP0185 (Receiver)

SABREv2_EU_Charger

The power delivered by the charger must be between min 2.5 Watts required by the radio equipment, and max 10 Watts in order to achieve the maximum charging speed.

Recommend charging within temperatures 5°C-40°C (41°F-104°F) for best performance.

COPYRIGHT/LEGAL INFORMATION

©2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.

2_Year_Warranty_Bug_Logo_2021 SABRE_v2_PRO_WIRELESS_CF_KCC