Controller per illuminazione RGB Smart e velocità ventole iCUE Commander PRO

€ 64,90 EUR

ADD TO CART

SKU CL-9011110-WW
Controller per illuminazione RGB Smart e velocità ventole iCUE Commander PRO

€ 64,90 EUR

Il Commander CORSAIR iCUE PRO trasforma il case del tuo PC in un case smart, grazie al software CORSAIR iCUE che consente di personalizzare la straordinaria illuminazione RGB, controllare in modo preciso la velocità delle ventole e di monitorare in modo accurato la temperatura, tutto da un unico dispositivo.


Compatibile con CORSAIR iCUE

ACCESSORI CORSAIR

COMMANDER PRO

IL CUORE DEL SISTEMA BASATO SU
CORSAIR iCUE

GUARDA IL VIDEO

TRASFORMA IL TUO CASE IN UN CASE INTELLIGENTE

Il Commander PRO di CORSAIR offre un controllo impareggiabile sulle prestazioni e sull’illuminazione RGB del sistema. Ottieni informazioni approfondite sulle temperature del sistema in tempo reale e imposta curve delle ventole intelligenti per regolare in automatico le velocità sulla base delle richieste del sistema.

Crea, personalizza e sincronizza magnifici effetti di illuminazione RGB quando colleghi le ventole RGB e le barre luminose di CORSAIR per uno straordinario spettacolo di luci che coinvolge l’intero sistema. Il Commander PRO di CORSAIR, basato sul software CORSAIR iCUE, è tutto ciò di cui hai bisogno per trasformare il tuo case in un case intelligente.

CONNETTI. COMANDA. CONTROLLA.

Il Commander PRO di CORSAIR controlla fino a sei ventole per case e due canali di illuminazione RGB, con quattro sensori di temperatura riposizionabili e due connettori interni USB 2.0.

CONTROLLO PRECISO DELLE VENTOLE

Controlla fino a 6 ventole CC a 3 pin o PWM a 4 pin, inclusa la capacità di azionarle in modalità ventola Zero-RPM per il totale silenzio.

ILLUMINAZIONE RGB STRAORDINARIA PER IL TUO PC

Due canali di illuminazione RGB combinati con il potente software CORSAIR iCUE completano la personalizzazione delle barre LED RGB e delle ventole RGB CORSAIR regolabili singolarmente.

Alterna tra vari profili.

  • Spirale arcobaleno

  • Pulsazione di colore

  • Variazione di colore

  • Pioggia

  • Onda arcobaleno

  • Visore

MONITORAGGIO ACCURATO DELLA TEMPERATURA

Quattro sensori di temperatura riposizionabili consentono di monitorare accuratamente le temperature all’interno del case con il software CORSAIR iCUE, nonché di monitorare le temperature della CPU, della scheda grafica e della scheda madre. È possibile impostare curve delle ventole e profili di illuminazione personalizzati per regolare automaticamente le velocità delle ventole e l’illuminazione RGB quando il sistema si surriscalda e si raffredda.

CONNETTI TUTTI I TUOI DISPOSITIVI USB

Due connettori interni USB 2.0 consentono di connettere con facilità dispositivi USB interni, come alimentatori compatibili con il software iCUE, sistemi di raffreddamento a liquido per CPU o porte USB per il pannello frontale della scheda madre.

CONTROLLO INTELLIGENTE, POSSIBILITÀ ILLIMITATE

Il potente software CORSAIR iCUE riunisce tutto, permettendo di personalizzare l’illuminazione RGB, monitorare le temperature dell’hardware e del refrigerante e regolare le velocità di ventole e pompe, tutto da un’unica interfaccia intuitiva.

ULTERIORI INFORMAZIONI

PROFILO SOTTILE E INSTALLAZIONE FACILE

Il design dal profilo sottile con strato adesivo incluso del Commander PRO, soli 133 mm P x 69 mm L x 15,5 mm A, agevola l’installazione dietro la scheda madre o su qualsiasi superficie piatta all’interno del case.

CORSAIR Hydro X Series products are compatible with the following coolants:

Coolant Brand Coolant Model Recommendation
CORSAIR XL5 Performance Coolant Preferred
Aquacomputer Double Protect Ultra Compatible
Coolaboratory Liquid Coolant Pro Compatible
EK Cryofuel Compatible
Jingway Iceland X Compatible
Liquid.Cool CFX Opaque Compatible
Mayhems IDC Compatible
Mayhems Pastel Compatible
Mayhems X1 Compatible
Mayhems XT-1 Nuke Compatible
Mayhems XT-1 Compatible
Nanoxia Cooling Fluid Pro Compatible
Nanoxia Cooling Fluid Pro Opaque Compatible
Primochill TRUE. Compatible
Thermaltake C1000 Compatible
XSPC EC6 Compatible
XSPC ECX Compatible

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.



Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...



On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...



At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.



Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".

 
CARICA ALTRO
1x Commander PRO
2x RGB LED hub cables
4x Thermal sensors
4x Fan extension cables
2x Mounting tape
1x Installation guide

L’UNIONE FA LA FORZA