iCUE Lighting Node PRO RGB Lighting Controller

€ 52,90 EUR

Aggiungi al carrello

iCUE Lighting Node PRO RGB Lighting Controller

SKU CL-9011109-WW
iCUE Lighting Node PRO RGB Lighting Controller

€ 52,90 EUR

shipping Icon

Free Shipping on orders over €79. Exclusions apply.

CORSAIR Lighting Node PRO fornisce effetti e un’illuminazione vivida al tuo PC.

Trova un rivenditore

ACCESSORI CORSAIR

LIGHTING NODE PRO

ILLUMINA IL TUO SISTEMA

GUARDA IL VIDEO

LUCI, iCUE, AZIONE

Crea, personalizza e sincronizza magnifici effetti di illuminazione RGB quando colleghi le ventole RGB e le strisce luminose di CORSAIR per uno straordinario spettacolo di luci che coinvolge l’intero sistema, il tutto da un unico controller che puoi tenere nel palmo della tua mano. Con Lighting Node PRO CORSAIR, basato sul software CORSAIR iCUE, puoi trasformare il tuo case in un case intelligente.

INCLUSE QUATTRO STRISCE LUMINOSE A LED RGB CORSAIR

Ogni striscia vanta dieci LED RGB regolabili singolarmente che illuminano il tuo sistema, comprensivi di magneti integrati per un'installazione in tutta semplicità.

ILLUMINA IL TUO PC, MA ANCHE LE TUE VENTOLE

Due canaline luminose RGB ti permettono di controllare in modo indipendente e tramite software fino a 12 LED RGB CORSAIR regolabili singolarmente oppure 12 ventole RGB CORSAIR.

CONTROLLO INTELLIGENTE, POSSIBILITÀ ILLIMITATE

Con il potente software CORSAIR iCUE puoi personalizzare e sincronizzare istantaneamente l'illuminazione RGB su tutti i tuoi prodotti RGB CORSAIR, come ventole, tastiera, strisce luminose a LED e molti altri.‎

Passa da un profilo all'altro.

  • Spirale arcobaleno

  • Pulsazione di colore

  • Variazione di colore

  • Pioggia

  • Onda arcobaleno

  • Visore

FACILE DA INSTALLARE

Lighting Node PRO si connette al tuo PC con una semplice porta USB 2.0, per la massima semplicità di configurazione e installazione.

Control Scheme
RGB Lighting
RGB Channels
Two
Max RGB devices per controller
12 fans (via RGB LED hub) or 12 RGB strips
RGB Strip diffusion
No
RGB Strip length
410mm
Weight
0.0295
Speed
NA
Fan Headers
N/A
Fan Control
N/A
USB connection
Internal USB 2.0 9-pin
Thermistor ports
N/A
System Requirements
Latest iCUE software, Windows 10
Warranty
2 years

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.



Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...



On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...



At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.



Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".

 

L’UNIONE FA LA FORZA