SKU CA-9011132-EU
Cuffie da gioco wireless VOID RGB Dolby 7.1 (EU)

€ 99,98 EUR

Goditi la libertà wireless a 2,4 GHz fino a 12 m + 16 ore di gioco ininterrotto, con Dolby 7.1 ad altissima precisione.


Compatibile con CORSAIR iCUE



Compatibile con CORSAIR iCUE

Per un suono che puoi vedere

Entra nel VOID: l'innovativa famiglia Corsair di cuffie da gioco avanzate. Che tu scelga wireless, USB o stereo per la tecnologia audio, sarai sempre un passo avanti rispetto ai tuoi nemici.

Con design all'avanguardia, un'eccezionale qualità del suono e le innovative funzionalità come l'InfoMic e il comando iCUE, le cuffie da gioco Corsair VOID ti consentono di controllare il tuo soundscape di gioco, senza premere il tasto pausa.

Prestazioni audio leggendarie con problemi zero

Per un audio 7.1 con cavi 0.0! Goditi la libertà wireless a 2,4 GHz fino a 12 m di distanza dal pc e 16 ore di gioco ininterrotto tra una ricarica e l'altra.

Niente pause al suono. Guarda il suono con InfoMic e il comando iCUE

InfoMic porta al tuo microfono le informazioni critiche, consentendoti di prestare istantaneamente attenzione a tutto ciò che devi sentire durante le azioni di gioco: impostazioni di equalizzazione, Dolby, disattivazione del microfono e durata della batteria – tutte informazioni trasmesse visivamente grazie agli indicatori LED accanto al microfono della cuffia.

Il comando iCUE consente di ridefinire al volo le impostazioni audio. Grazie al quadrante digitale con pulsante puoi modificare rapidamente volume, impostazioni di equalizzazione e uso del Dolby 7.1, il tutto da un singolo comando.

Comfort senza rivali

Le orecchie non sono mai state tonde, quindi perché acquistare delle cuffie con padiglioni rotondi? La nostra forma "True Form" si adatta perfettamente alle tue orecchie come fosse un guanto..per orecchie. E quando è il momento di impegnarti in una maratona di gioco, i cuscinetti dei padiglioni in memory foam rivestiti in microfibra consentono interminabili sessioni di gioco.

Illuminazione RGB al tuo servizio con il software iCUE

Esprimi la tua creatività con 16,8 milioni di colori di possibilità da adattare al tuo hardware e al tuo stile individuale. I LED in ogni padiglione consentono di ottenere colori, pattern e potenza regolabili per realizzare effetti luminosi da leggeri a vistosi e accattivanti.

Il software iCUE (Corsair Utility Engine) ti permette tutto questo, e molto altro ancora. E con iCUE, il tuo set di gioco Corsair RGB può lavorare in completa armonia con ogni combinazione di effetti - dalla semplice sincronizzazione dei colori alla selezione di effetti ad onda o a catena che si estendono attraverso la tastiera, il mouse e le cuffie.

Certificazione Discord

Grazie alla certificazione Discord, puoi giocare sapendo che il microfono e l’audio della tua cuffia con microfono VOID sono stati testati e valutati come corrispondenti agli standard più elevati, assicurando una comunicazione chiara e un ottimo audio, indipendentemente dal gioco che scegli.

Scopri di più sulla certificazione Discord.

Epic Immersion e True Audio multicanale

I driver al neodimio da 50 mm creano bassi incredibili, alti scintillanti e un dynamic range elevato, mentre il Dolby surround 7.1 puro ti offre un audio posizionale super accurato.

Microfono a riduzione del rumore

Se sei un giocatore di gruppo, hai senz'altro bisogno di una comunicazione voce chiara e precisa. Il microfono delle cuffie con riduzione del rumore porta la tua voce in primo piano - e nient'altro!

Controllo intelligente. Possibilità illimitate.

Il potente software CORSAIR iCUE consente impostazioni dell’equalizzatore audio personalizzate, audio surround 7.1 avvolgente, controllo del sidetone e sincronizzazione dell’illuminazione RGB compatibile con periferiche, sistemi di raffreddamento, ventole e altri prodotti CORSAIR.

ULTERIORI INFORMAZIONI

CONTENUTO E SPECIFICHE



  • Package Contents

  • Corsair Gaming VOID RGB Wireless Gaming Headset
  • Wireless USB adapter
  • USB charging cable (1.5m)
  • Quick Start Guide
  • Safety Leaflet
  • Warranty Card
  • Compatibility

  • PC with USB port
  • Windows 10, Windows 8, Windows 7, Internet connection (for CUE software download)

Specifiche tecniche

  • Headphone Frequency Response: 20Hz - 20 kHz
  • Headphone Battery Life: Up to 16 hours
  • Headphone Sensitivity: 107dB (+/-3dB)
  • Headphone Wireless Range: Up to 40 feet (12m)
  • Impedance: 32 Ohms @ 1kHz
  • Headphone Type: Wireless
  • Headphone Connector: USB Wireless Receiver
  • Headphone Drivers: 50mm
  • Microphone Impedance: 2.2k Ohms
  • Microphone Type: Unidirectional noise cancelling
  • Microphone Frequency Response: 100Hz to 10kHz
  • Microphone Sensitivity: -37dB (+/-3dB)
Headset Backlighting
Yes
Audio Product
Headset
Audio CUE Software
Yes
Surround Sound
Yes
Detachable Microphone
No
Rechargble Battery
Yes
Headphone Frequency Response
20Hz - 20 kHz
Headphone Battery Life
Up to 16 hours
Headphone Sensitivity
107dB (+/-3dB)
Headphone Wireless Range
Up to 40 feet (12m)
Impedance
32 Ohms @ 1kHz
Headphone Type
Wireless
Headphone Connector
USB Wireless Receiver
Headphone Drivers
50mm
Cable Length
N/A
Model
VOID
Color
Black
Audio
7.1 Surround
Lighting
RGB
Platform
PC
Microphone Impedance
2.2k Ohms
Microphone Type
Unidirectional noise cancelling
Microphone Frequency Response
100Hz to 10kHz
Microphone Sensitivity
-37dB (+/-3dB)
CARICA ALTRO

VOID Gaming Headset FAQ

1.What wireless frequency does VOID Wireless use?

All VOID Wireless headsets use the 2.4GHz frequency.

2.What kind of drivers do the VOID headsets use?

All VOID headsets use custom tuned 50mm neodymium powered drivers.

3.How does Void differ from the V1500/H2100?

VOID headsets are an upgrade from the H2100 and H1500 series headsets in virtually every aspect. Starting with the mechanical design, VOID is built from the ground up to redefine comfort and enable marathon gaming sessions with a revolutionary new ear cup shape and top of the line microfiber fabrics and memory foam. On the wireless versions, battery life has also been improved from 10-12 hours to about 16, a very healthy improvement. This is thanks in part to the new 2.4GHz chipset that the VOID Wireless uses a brand new design that enables low power consumption but has a much greater "polling rate", for virtually zero dropouts and much more robust signal lock.

All of the VOID variants enjoy an improved unidirectional microphone (and the convenience of instant feedback with InfoMic on the wireless and USB models), and acoustic tuning is vastly improved thanks to a new driver that is combined with the digital signal processing (DSP) power of the Corsair Utility Engine (or CUE, for short). Using CUE also enables users to deploy a single software suite to command and control all of their peripheral devices (including RGB color, another feature that is unique to the VOID Wireless and USB headsets), instead of using separate software packages.

4.Does VOID have programmable buttons/G-keys?

The VOID user interface (UI) has been greatly simplified to offer expansive control right from the headset itself without the need for multiple confusing and complex buttons. With the powerful CUE Control dial, you will enjoy instant control of your audio experience not possible with any other headset. In addition to volume control, a short key press (SKP) of the CUE Control will cycle through the EQ presets. A long key press (LKP) enables and disables Dolby 7.1 right from the headset itself without having to interrupt your game.

The mute button has dual functionality as well: naturally, a short key press (SKP) will mute/unmute the microphone, but a long key press will enable/disable the microphone's "Side Tone" feature.

The power button turns the headset on or off with a short key press (SKP), but a very long key press (VLKP, about 8 seconds or longer) will put the headset into "pairing mode". The VOID Wireless headset comes pre-paired from the factory, so this process usually isn't necessary for most users. (see #16 for information about how to pair your headset to the USB receiver, if necessary).

5. What is "Side Tone"?

Side Tone will add a little bit of your voice back into your audio output this enables you to self-modulate your speaking volume because you hear how loud your own voice sounds.

6.Is the mic flexible?

Yes! All of the VOID headset microphones use Thermoplastic Elastomers (TPE) AKA thermoplastic rubbers, enabling the microphone to be very flexible and keep its structural integrity. In fact, we recommend bending the mic closer to your face for better mic performance. (see the photo at #7, below)

7.How much of an improvement will I see if I bend the mic closer?

Adjusting the mic could potentially increase mic sensitivity by 10dB (or about twice as loud). The image below shows the optimal placement of the mic for the best performance.

 
 

Your new VOID Headset features a high performance "uniderctional" microphone designed to reject noise other than your voice, but it must be pointed directly at your mouth to function correctly.

  • Bend the flexible microphone boom to best fit near to the left corner of your mouth
     
  • The microphone should be about 1.5 inches / 4cm away from your mouth for best performance.
     
  • We've found that about a 30 degree bend is a good place to start, but feel free to increase or decrease this if your mic is too loud or too soft.
 

8.How can I change my EQ settings?

EQ settings can be edited by using Corsair Utility Engine (CUE). You can create new EQ profiles, hide ones you don't use, as well as sort them in the order that CUE Control cycles through.

9.What else can be done using CUE?

The VOID headset can be easily customized using CUE. Each ear cup is equipped with RGB LEDs and just like with our other RGB devices, you may customize colors and lighting patterns. With CUE Link lighting may be synchronized across all of our other RGB devices.

 

10.Does my content need to be in specially encoded to take advantage of Dolby Headphone? Do I need to look for PC games with the Dolby logo?

No. Dolby Headphone works with any stereo, 5.1, or 7.1 audio stream.

11.Is it possible to use the headset without any software installation?

Yes. This means you will not be able to customize any lighting effects, or use any of the EQ settings and Dolby. The firmware will also need to be updated on the headset as well.

12.How do I know my headset is charging?

While charging, the LEDs on InfoMic will light up. Depending on the battery levels the LED will light up different colors red: low battery, amber: 20% or higher, green: fully charged

13.I've plugged my headset in to charge but it doesn't appear to be charging and doesn't turn on. What's wrong with it?

The headset may have inadvertently been placed in "bootloader mode". When in bootloader mode, the headset will disable all audio and lighting, in other words it will appear to be off. Bootloader mode is our failsafe protocol that prevents the headset from becoming unresponsive, which typically happens if the headset is improperly disconnected during a firmware update.

14.I never disconnected my headset during a firmware update. Why is it in bootloader mode?

If a button is held down inadvertently while plugging the headset in to charge, it may go into bootloader mode.

15.Is there any way to recover the headset from bootloader mode?

Yes. If you re-flash the firmware the headset will return to normal. You can do this by going into CUE's Settings, under Settings, there will be an "Update Firmware" button. Click the "Update firmware" button and use "Force update from the server" option. Once the headset is recovered, it will need to be paired with wireless adapter.

16.How do I pair my headset to the wireless adapter?

First you will need to use a paper clip to insert to the small hole under the white LED on the wireless adapter. Press and hold it for a few seconds and the white LED will begin rapidly flashing. Then on the headset press and hold the power button (while the headset is off) for 8 seconds, if done correctly the LEDs on InfoMic will begin flashing green and red. Once the headset is paired, InfoMic will indicate that it is paired by pulsing green and the adapter will no longer rapidly flash.

17.My headset lights up but I don't hear any audio. How do I get audio working?

Make sure that under your Windows setting that the VOID headset is set as your Default Playback device.

18.Does VOID Wireless have an auto shutoff function?

Yes. VOID Wireless will begin the automatically shut off process if it does not detect audio for 10 minutes. After the 10 minutes, users will be prompt that automatic shut off started and given 60 seconds to cancel if needed.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.