Sistema di raffreddamento a liquido per CPU Hydro Series™ H80i v2

$ 152,57 USD

ADD TO CART

SKU CW-9060024-WW
Sistema di raffreddamento a liquido per CPU Hydro Series™ H80i v2

$ 152,57 USD

Il sistema di raffreddamento a liquido per CPU Hydro Series™ H80i v2 dispone di un radiatore con spessore superiore da 120mm e due ventole doppie SP120L PWM per un raffreddamento efficiente e personalizzabile per la tua CPU ad alte prestazioni.


Compatibile con CORSAIR iCUE

Potente e flessibile sistema di raffreddamento a liquido per CPU da 120mm per PC ad alte prestazioni.

Hydro Series H80i v2 è un sistema di raffreddamento a liquido per CPU all-in-one dalle prestazioni estreme che funziona con punti di montaggio radiatore da 120mm. Il radiatore con spessore superiore da 49mm x 120mm e le doppie ventole SP120L PWM offrono un'eccellente dissipazione del calore, ideale per CPU con prestazioni estreme. È compatibile con Corsair Link, in modo da permetterti di personalizzare le prestazioni di raffreddamento, monitorare la temperatura del sistema e modificare il colore dell'illuminazione LED RGB.

Radiatore con spessore superiore

Il radiatore da 120mm funziona con punti di montaggio ventole da 120mm per un'ampia compatibilità, ma ha una profondità di 49mm per una superficie di raffreddamento maggiore e più rapida ed un raffreddamento più efficace.

Prestazioni di raffreddamento personalizzate

È possibile selezionare la velocità delle ventole doppie SP120L PWM grazie al pannello di controllo Corsair Link o qualsiasi utilità standard di velocità ventole. E sono disponibili più opzioni: solo una ventola per salvare spazio oppure entrambe in una configurazione sui lati opposti per un'extra efficienza di raffreddamento.

Corsair Link integrato

Collega il cavo Corsair Link incluso ad un connettore USB sulla scheda madre e scarica il software gratuito Corsair Link per sbloccare tutto il potenziale.

È possibile personalizzare le prestazioni di raffreddamento, monitorare il raffreddamento e la temperatura della CPU e modificare il colore dell'illuminazione a LED RGB dal bianco predefinito per combinarlo al tuo sistema oppure modificare il colore in base alla lettura della temperatura o di altri dati.

Il sistema di raffreddamento per CPU ad elevate prestazioni pratico e semplice

H80i v2 è un sistema a loop chiuso venduto preriempito. Include un sostegno di montaggio modulare senza viti per una rapida installazione e presenta un design migliorato della piastra di raffreddamento e della pompa per un'eccezionale efficienza.

Sistemi di raffreddamento a liquido per CPU Hydro Series

I sistemi di raffreddamento per CPU Hydro Series offrono la potenza di un raffreddamento a liquido in un pacchetto compatto e di facile installazione. Offrono inoltre un elevato raffreddamento per prestazioni di overclocking estremo, senza la complessità dei tradizionali kit di raffreddamento ad acqua.

Controllo intelligente. Possibilità illimitate.

Il software CORSAIR iCUE dà vita al tuo sistema grazie all’illuminazione RGB dinamica sincronizzata, velocità delle ventole personalizzabile per una minore rumorosità e monitoraggio avanzato del sistema.

ULTERIORI INFORMAZIONI

CONTENUTO E SPECIFICHE



  • Package Contents

  • Hydro Series H80i v2 Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two 120mm High Torque Fans
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3
  • AMD™ sockets FM1, FM2, AM2, AM3

Specifiche tecniche

  • Radiator Dimensions: 154mm x 123 mm x 49mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2435 RPM
  • Fan airflow: 70.69 CFM
  • Noise level: 37.7 dBA
  • Fan static pressure: 4.65 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
Yes
Radiator Dimensions
154mm x 123 mm x 49mm
Fan Dimensions
120mm x 25mm
Fan Speed
2435 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
RGB
Radiator Size
120mm
Fan Model
SP Series
Fan airflow
70.69 CFM
Noise level
37.7 dBA
Fan static pressure
4.65 mm-H2O
CARICA ALTRO

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.