Ventola Air Series™ AF120 con LED blu Quiet Edition a flusso d'aria da 120mm — Confezione doppia

$ 41,97 USD

ADD TO CART

SKU CO-9050016-BLED
Ventola Air Series™ AF120 con LED blu Quiet Edition a flusso d'aria da 120mm — Confezione doppia

$ 41,97 USD

Le ventole CORSAIR Air Series™ LED a flusso d'aria per case combinano efficienza, flusso d'aria a basso ed illuminazione a LED.

LED Color
Fan Size

Alte prestazioni di raffreddamento ed illuminazione

Le ventole Corsair Air Series LED a flusso d'aria per case combinano efficienza, flusso d'aria a basso ed illuminazione a LED. Le pale appositamente sagomate sono realizzate per fornire un flusso d'aria di grandi volumi con livelli di rumore inferiori rispetto alle tipiche ventole da case. Sono semitrasparenti con struttura satinata, per un incredibile effetto della luce dei quattro LED.

Ottimizzate per un eccellente flusso d'aria, e raffreddamento di grossi volumi

I modelli di ventole Air Series AF offrono le migliori prestazioni per spazi illimitati con almeno 3 cm di ingombro - ideali per essere montate sul retro o nella parte alta del case come ventole d'aspirazione per la scheda madre e la CPU del computer, acceleratori grafici ed altre componenti che producono calore all'interno del case. Funzionano perfettamente anche come ventole d'aspirazione per zone come i pannelli laterali o le griglie sul fondo.

Per zone altamente ristrette come i vani per dischi rigidi o in altri spazi ridotti dove il volume d'aria è inferiore, affidatevi ai nostri modelli di ventole Air Series SP a pressione statica.

Prestazioni superiori rispetto alle ventole standard per case

I modelli di ventole Air Series AF sono progettati per superare i livelli di prestazione delle ventole standard per case. Le pale sono appositamente sagomate per fornire un flusso d'aria ottimale e sono ultra sottili per bassi livelli di rumore e turbolenza. Il sistema di cuscinetti con guaina riducono le vibrazioni e garantiscono un funzionamento silenzioso.

Prestazioni

AF120 Quiet Edition LED AF140 Quiet Edition LED
Dimensioni 120mm x 25mm 140mm x 25mm
Tensione di funzionamento 7V - 12V 7V - 12V
Prestazioni a 12 V Prestazioni a 12 V
Flusso d'aria 52.19 CFM 66.4 CFM
Pressione statica .75 mmH20 .80 mmH20
Livelli sonoro 25.2 dBA 25.5 dBA
Velocità 1500 RPM 1200 RPM
Consumi 0.40 A 0.23 A

CONTENUTO E SPECIFICHE



  • Package Contents

  • x2 Air Series AF120 LED Quiet Edition High Airflow 120mm Fan
  • Mounting Screws
  • Warranty leaflet

Fan Warranty
Two years
Fan Size
120mm x 25mm
Bearing Type
Sleeve
Fan Type
Quiet Edition
Flow Type
Airflow
LED Color
Blue
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR LINK compatibility
NO
Fan Model
AF Series
Package Quantity
Twin Pack
Speed
1500 RPM
Sound Level
25.2 dBA
Power Draw
0.40 A
Static Pressure
.75 mmH20
Fan Airflow
52.19 CFM
CARICA ALTRO

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.