SKU CO-9050003-WW
Air Series AF120 Performance Edition ハイエアフロー 120mm ファン

Air Series AF120 ファンで、すべてをその手に。カスタム設計された超薄型ブレード 9 枚により、十分な量の空気を送り出します。ゴム製のコーナーにより、振動を劇的に低減します。

Fan Size
Package Quantity

効率的な大容量冷却のためのハイエアフロー

Air Series AF ケースファンは、3cm (1.2 インチ)以上の隙間が確保された制限の厳しくないスペースで最高のパフォーマンスを発揮します。そのため PC ケースの背面または上面に取り付けて、PC のマザーボードや CPU、グラフィックアクセラレータなどケース内で発熱するコンポーネントの換気ファンとして使用するのに適しています。また、制限の厳しくない吸気ファンとして、サイドパネルや底面の吸気口のような領域に使用しても、同様に機能します。

ハードドライブケージのような制限の厳しい環境や、空気量の少ない狭い場所については、高静圧ファンの Air Series SP モデルをチェックしてください。

パフォーマンス

AF120 Performance Edition AF120 Quiet Edition
サイズ 120mm x 25mm 120mm x 25mm
動作電圧 7V - 12V 7V - 12V
12V でのパフォーマンス 12V でのパフォーマンス
エアフロー 63.47 CFM 39.88 CFM
静圧 1.1 mmH20 0.5 mmH20
ノイズ 30 dBA 21 dBA
スピード 1650 RPM 1100 RPM
定格電流 0.13 A 0.08 A

製品と仕様



  • Package Contents

  • x1 AF120 Performance Edition Fan
  • Three colored rings in red, blue, and white
  • Mounting Screws
  • Voltage step-down adapter for lower speed operation

Fan Warranty
Two years
Fan Size
120mm x 25mm
Bearing Type
Sleeve
Fan Type
Performance Edition
Flow Type
Airflow
LED Color
None
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR iCUE Compatibility
NO
Fan Model
AF Series
Package Quantity
Single Fan
Speed
1650 RPM
Sound Level
30 dBA
Power Draw
0.13 A
Static Pressure
1.1 mmH20
Fan Airflow
63.47 CFM
さらに表示

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�