SKU CL-9011110-WW
iCUE Commander PRO スマート RGB ライティングとファン速度コントローラ

CORSAIR iCUE Commander PRO は、CORSAIR iCUE ソフトウェアを使用して、カスタマイズ可能な鮮やかな RGB ライティング、高精度のファン速度コントロールと正確な温度監視をすべて一つのデバイスから実現することで、お使いの PC ケースをスマートケースに変身させます。




CORSAIR iCUE ソフトウェア搭載システムの中枢


あなたのケースをスマート ケースに変えます

CORSAIR Commander PRO はシステムの能力とRGB ライティングに比類無きコントロールを与えます。システム温度を詳細に調べ、システムの要求に応じた自動調整速度をもつインテリジェントなファン曲線を設定します。

すばらしいシステムワイドなライトショーのために CORSAIR RGB ファンとライティングストリップを接続すると、すばらしいRGB ライティングが生成され、カスタマイズされ、同期されます。CORSAIR iCUE ソフトウェアを使用して、CORSAIR Commander PRO はあなたのケースをスマートケースに変えます。


CORSAIR Commander PRO は、4つの位置調整可能な温度センサと2つのUSB 2.0 内部ヘッダを備えて、最大6つのケースファンと2つのRGBライティングチャネルを制御します。


最大6つの3ピンDC または4ピンPWM を制御し、全体の静粛性のためにZero-RPM ファンモードでの実行が可能です。

あなたの PCに素晴らしい RGB ライティングを

強力な CORSAIR iCUE ソフトウエアと組み合わせたRGBライティングチャネルは、個別にアクセス可能なRGB LED ストリップとCORSAIR RGB ファンを完成させます。


  • スパイラルレインボー

  • カラーパルス

  • カラーシフト

  • レイン

  • レインボーウェーブ

  • バイザー


4つの位置調整可能な温度センサが、CORSAIR iCUE ソフトウエアを用いたケース全体での正確な温度の監視を可能にします。同時に、CPU 、グラフィックカードとマザーボードの温度も正確に監視します。システムが加熱されまたは冷却されるのにつれて自動的にファン速度とRGB ライティングを調整するカスタムファン曲線と照明プロファイルを設定しましょう。

すべてのUSB デバイスを接続しましょう

2つのUSB 2.0 内部ヘッダが、iCUE 互換電源、液体CPU クーラー、またはマザーボード前面パネルUSB ポートといった内部USB デバイスの接続を容易にします。


強力な CORSAIR iCUE ソフトウェアを使用すると、RGB ライティングをカスタマイズしたり、ハードウエアや冷媒温度を監視したり、ファン速度やポンプ速度を調整したり、全てを単一の使いやすいインターフェースから一緒に行なうことができます。



133mm W x 69mm L x 15.5mm H の寸法のCommander PRO の低プロファイル設計と、付属の粘着背面は、マザーボードや、ケース内のあらゆる平面の背後への取付を容易にします。

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.

Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...

On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...

At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.

Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".

1x Commander PRO
2x RGB LED hub cables
4x Thermal sensors
4x Fan extension cables
2x Mounting tape
1x Installation guide