Deliver the higher frequencies and greater capacities of DDR5 RAM technology in a high-quality, compact DDR5 memory module that suits your AMD® Ryzen™ AM5 system.
Memory Color
그레이
흰색
색상:
Capacity
16GB (1 x 16GB)
16GB (2 x 8GB)
32GB (1 x 32GB)
32GB(2 x 16GB)
48GB(2 x 24GB)
64GB(2 x 32GB)
64GB(4 x 16GB)
96GB(2 x 48GB)
재고 없음
Speed & Latency (Up To)
Speed (MT/s) affects memory bandwidth.
Latency (CL) affects how fast each memory cycle completes.
여러 코어를 사용하는 시대에, DDR5의 전례 없는 처리 속도는 고급 CPU가 데이터를 쉽고 빠르게 가져올 수 있도록 합니다. 게임을 하든, 콘텐츠를 만들든, 탭을 100개 열든, 멀티태스킹을 하든 상관없이 게이밍 PC는 복잡한 작업을 그 어느 때보다 빠르게 처리할 수 있습니다.
그 어느 때보다 쉽게
온보드 전압 조정
여러분에게는 힘과 통제권이 있습니다. iCUE 소프트웨어 제어가 포함된 내장형 전압 조정 기능은 더 쉽고 미세하게 조정된 출력을 제공하여, 그 어느 때보다 안정적인 오버클록킹을 선사합니다.
나만의 오버클록킹
사용자 지정 AMD® EXPO 프로필
iCUE를 통해 나만의 AMD EXPO 프로필을 저장할 때마다 성능 설정을 수동으로 조정하는 지루한 프로세스와 작별하세요.
앱 또는 작업별로 설정 프로필을 쉽게 사용자 지정하고 맞춤화하여 효율성을 높이세요.
*2023년 출시 예정
성능이라는 유산을 이어갑니다
소형 폼 팩터
크기는 작지만 거의 모든 DDR5 빌드와 광범위한 호환성이 보장됩니다.
수작업을 통해 선별되는 메모리 칩
적극적인 타이밍 옵션이 제공되어 항상 높은 주파수의 성능이 달성됩니다.
견고한 알루미늄 열 분산기
최신 시스템 디자인에 어울리는 세련된 VENGEANCE 스타일을 통해 메모리에서 열을 빠르게 방출합니다.
고성능 PCB
우수한 오버클록킹 기능을 위한 신호 품질 및 안정성이 보장됩니다.
광범위한 호환성
어떤 메모리를 사용할지 잘 모르시겠나요? 메모리 페이지에 직접 통합되어 있는 메모리 찾기 도구를 사용하여 니즈에 가장 적합한 메모리를 찾아보세요. 시스템 구성에 맞추고 호환 메모리 키트와 짝지을 수 있는 다양한 옵션이 있습니다.
Yes, this kit is optimized for AMD Ryzen 7000 and 9000 Series on AM5 motherboards. The 6000 MT/s speed matches AMD's Infinity Fabric sweet spot (1:1 ratio at 3000 MHz FCLK), and the included EXPO profile enables one-click overclocking. Compatible with AMD 600 and 800 series chipsets (B650, X670, B850, X870).
Yes, through Intel XMP 3.0 profile support. Compatible with Intel 700 and 800 series chipsets (Z790, B760, Z890). Note that 6000 MT/s requires an overclocking-capable chipset (Z-series). On B-series boards, the memory will run at JEDEC 4800 MT/s unless you have a board that supports memory overclocking.
Capacity and price. Both run at 6000 MT/s CL30 with identical timings (30-36-36-76) and voltage (1.40V). The 2x48GB kit (96GB total) costs more but provides 50% more capacity for heavy multitasking, virtual machines, or large dataset work. If you're maxing out 64GB regularly, the 96GB kit is worth it. Otherwise, 64GB is the sweet spot for most gaming and content creation.
It requires one BIOS setting. Out of the box, it runs at JEDEC 4800 MT/s. To reach the rated 6000 MT/s, enable the EXPO profile (AMD) or XMP profile (Intel) in your motherboard BIOS. This is a one-click setting — no manual voltage or timing adjustments needed. The profiles handle everything automatically.
Yes. The VENGEANCE DDR5 uses a compact, low-profile heatspreader that clears nearly all tower air coolers, including the NH-D15, Dark Rock Pro 4, and Assassin IV. The aluminum heatspreader is significantly shorter than RGB or premium memory kits, making it ideal for builds with limited clearance.
CORSAIR doesn't publish exact height specs on the product page, but VENGEANCE DDR5 non-RGB kits are typically around 34-35mm tall, which is considered low-profile. This is about 10-15mm shorter than RGB memory kits like DOMINATOR or VENGEANCE RGB, ensuring wide cooler compatibility.
Technically possible but not recommended. Mixing kits — even identical SKUs — can cause stability issues because memory chips come from different production batches. If you need 192GB, buy a single 4x48GB kit or a validated 192GB kit. If you do mix kits, you may need to run at lower speeds or looser timings for stability.
Yes, as long as your B650 board has EXPO support (most do). Check your motherboard's QVL (Qualified Vendor List) to confirm this specific kit is validated, though CORSAIR VENGEANCE kits are widely compatible. EXPO works on both B650 and X670 chipsets — it's not restricted to high-end boards like Intel's XMP on Z-series.
Two 48GB DDR5 UDIMM modules (96GB total) with aluminum heatspreaders. No additional accessories, cables, or software discs. Installation is standard: insert modules into DIMM slots, enable EXPO/XMP in BIOS. The kit is covered by CORSAIR's limited lifetime warranty.
No. DDR5 and DDR4 are physically incompatible — different pin counts (288-pin DDR5 vs 288-pin DDR4 with different notch positions) and different voltages. You need a DDR5-compatible motherboard, which means AMD 600/800 series (AM5) or Intel 600/700/800 series (LGA1700/1851). DDR4 boards cannot accept DDR5 memory.
Yes, 1.40V is within safe operating range for DDR5. JEDEC spec is 1.1V, and most performance DDR5 kits run between 1.35V-1.45V for overclocked speeds. The onboard PMIC (power management IC) regulates voltage delivery, and CORSAIR tests these modules extensively at 1.40V for stability and longevity.
No. This is the non-RGB VENGEANCE DDR5 series with a solid aluminum heatspreader in grey. If you want RGB, look for CORSAIR VENGEANCE RGB DDR5 or DOMINATOR TITANIUM RGB. The trade-off is lower profile and typically lower cost for non-RGB versions.
Limited lifetime warranty. CORSAIR covers defects in materials and workmanship for the lifetime of the product. This includes failure to run at rated speeds when EXPO/XMP is enabled on compatible hardware. Register your product at corsair.com for warranty support.
Yes, assuming your B650 board supports EXPO (most do). The Ryzen 7600X officially supports up to DDR5-5200, but 6000 MT/s is widely stable on Ryzen 7000 series with EXPO. Check your motherboard's QVL for validated kits. If you encounter instability, you may need to update BIOS or adjust FCLK settings.
Expect 5-15% performance gains in memory-intensive tasks. For video editing (Premiere, DaVinci), faster scrubbing and rendering. For gaming on AMD Ryzen, 6000 MT/s optimizes Infinity Fabric for 5-10% higher 1% lows in CPU-bound scenarios. The jump from 4800 to 6000 is more noticeable than 6000 to 7200 due to AMD's FCLK sweet spot at 3000 MHz (1:1 with 6000 MT/s).
