How to: Pair your HS70 headset wireless receiver

If your HS70 headset is not connecting properly or you have recently replaced the wireless receiver, you will need to re-pair your device.

To pair the wireless receiver:

1. Plug the wireless receiver directly into an I/O port on your system motherboard.
2. With the receiver dongle plugged in, locate the tiny hole near the seam of the dongle; this is where the reset button is.

1. Use a paper clip or similar thin object to press into the hole until the receiver's LED begins to blink.
2. Press and hold the power button until the LED becomes solid.

Your wireless receiver should be paired after completing the steps above.

If you are still experiencing connection issues, contact Customer Support and we will provide further assistance.