The CORSAIR iCUE LINK XH505i RX 360 RGB custom cooling kit is an updated and improved version of our Hydro X Series iCUE LINK XH405i, featuring an updated Pump/Reservoir and new fans. So lets go over the differences.
Overview
The XH505i features iCUE LINK RX120 RGB 120mm fans as opposed to iCUE LINK QX120 RGB 120mm. The reason for the change is simple: The RX120 fans offer a higher static pressure at the same RPM making them better for using with a custom cooling setup.
However, the star of the show is the new XD6 Pump/Reservoir with the Flow Drive Max pump at its core. While it looks the same as the previous generation, you can learn more about its stats in our dedicated article: XD6 vs XD5 RGB Elite: What's the Difference?.
The main benefit here is that it's a noticeable step up in performance from the previous generation allowing you to keep on top of the hotter GPUs which can draw up 600W with the RTX 5090.
iCUE LINK XH505i RX 360 RGB Custom Cooling Kit: What's Included
Lets go over what is included with the kit and how these are used within a custom cooling setup. It is worth mentioning that the XH505i custom cooling kit does not include a heat gun. You will need to procure one of these yourself in order to bend the hardline tubing.
| Item | Use |
|---|---|
| iCUE LINK XC7 RGB ELITE CPU Block | Makes contact with the CPU to transfer the heat into the rest of the custom cooling loop. |
| iCUE LINK XD6 RGB ELITE Pump reservoir combo | Holds and circulates the coolant in the loop, allowing it to move heat along with it. |
| XR5 360mm Radiator | Takes the heat from the coolant and spreads it a cross a large surface area, making it easier to cool. |
| 3x iCUE LINK QX120 RGB fans | Pushes air through the radiator, taking away the heat to be exhausted out of the system. |
| iCUE LINK System Hub | Used to provide data and power to the fans, CPU block, and pump/reservoir |
| iCUE LINK 4-Way Splitter | Allows for more connections to the system hub. |
| 8x XF Hardline14mm OD Fitting (2x Four pack) | Ensures a tight seal between the hardline tubing and the end connections to stop any leaks. |
| 2x 90° Rotary Adapter (1x Twin pack) | Place before a fitting to easily create perfect 90-degree connections. |
| 3m XT Hardline14mm Tubing (6x 0.5m length) | Used to carry coolant and connect the different parts of the custom cooling system. |
| XT Hardline Bending Toolkit | A variety of tools to help get the perfect length and bend on the hardline tubes. |
| XL8 Clear coolant 1l bottle | The coolant that is in the tubes, constantly moving to transfer heat away from the CPU. |
| Filling Bottle | A simple tool used to easily transfer the coolant into the system even in hard-to-reach locations. |
PRODUCTS IN ARTICLE