Controlador de iluminação e velocidade de ventoinha iCUE Commander PRO Smart RGB

64,90 € EUR

ADD TO CART

SKU CL-9011110-WW
Controlador de iluminação e velocidade de ventoinha iCUE Commander PRO Smart RGB

64,90 € EUR

O CORSAIR iCUE Commander PRO transforma o gabinete do seu PC em um gabinete inteligente, usando o software iCUE da CORSAIR para ativar personalizações incríveis de iluminação RGB, controle preciso da velocidade da ventoinha e um monitoramento rigoroso de temperatura, tudo isso a partir de um único dispositivo.


Compatível com iCUE da CORSAIR

ACESSÓRIOS DA CORSAIR

COMMANDER PRO

O CORAÇÃO DO SEU SISTEMA COM O
CORSAIR iCUE

ASSISTIR AO VÍDEO

DEIXE SEU GABINETE MAIS INTELIGENTE

O CORSAIR Commander PRO permite que você tenha o máximo de controle sobre o desempenho e a iluminação RGB do seu sistema. Saiba, em tempo real, a temperatura exata do seu sistema e configure curvas de ventoinha inteligentes para ajustar automaticamente suas velocidades de acordo com as demandas do sistema.

Crie, personalize e sincronize efeitos de iluminação RGB incríveis quando conectar as ventoinhas RGB e as fitas de iluminação RGB da CORSAIR para criar um show de luzes em todo o sistema. Com o software CORSAIR iCUE, o CORSAIR Commander PRO é tudo o que você precisa para deixar seu gabinete mais inteligente.

CONEXÃO. COMANDO. CONTROLE.

O CORSAIR Commander PRO controla até seis ventoinhas de gabinete e dois canais de iluminação RGB, com quatro sensores de temperatura reposicionáveis e dois conectores USB 2.0 internos.

CONTROLE PRECISO DE VENTOINHA

Controla até 6 ventoinhas CC de 3 pinos ou PWM de 4 pinos e também inclui o modo Zero RPM para uma operação totalmente silenciosa.

ILUMINAÇÃO RGB IMPRESSIONANTE PARA SEU PC

Dois canais de iluminação RGB combinados com o poderoso software CORSAIR iCUE completam a personalização de fitas LED RGB e ventoinhas CORSAIR RGB que podem ser configuradas individualmente.

Alterne entre vários perfis.

  • Arco-íris espiral

  • Pulsação de cor

  • Mudança de cor

  • Chuva

  • Onda de arco-íris

  • Visor

MONITORAMENTO PRECISO DA TEMPERATURA

Quatro sensores de temperatura reposicionáveis permitem que você monitore com precisão a temperatura dentro do gabinete usando o software CORSAIR iCUE, bem como as temperaturas da CPU, da placa gráfica e da placa-mãe. Configure curvas de ventoinha personalizadas e perfis de iluminação para ajustar automaticamente a velocidade e a iluminação RGB quando o sistema aquecer e resfriar.

CONECTE TODOS OS SEUS DISPOSITIVOS USB

Dois conectores USB 2.0 internos permitem que você conecte facilmente dispositivos USB internos, como fontes de alimentação compatíveis com o iCUE, coolers líquidos para CPU ou portas USB da placa-mãe no painel frontal.

CONTROLE INTELIGENTE. INFINITAS POSSIBILIDADES.

O poderoso software CORSAIR iCUE permite que você personalize a iluminação RGB, monitore a temperatura de componentes de hardware e do líquido refrigerador e ajuste a velocidade das ventoinhas e da bomba em uma única interface intuitiva.

SAIBA MAIS

COMPACTO E FÁCIL DE INSTALAR

O design compacto do Commander PRO (133 mm x 69 mm x 15,5 mm) e a faixa adesiva na parte traseira facilitam a instalação atrás da placa-mãe ou em qualquer superfície plana dentro do gabinete.

CORSAIR Hydro X Series products are compatible with the following coolants:

Coolant Brand Coolant Model Recommendation
CORSAIR XL5 Performance Coolant Preferred
Aquacomputer Double Protect Ultra Compatible
Coolaboratory Liquid Coolant Pro Compatible
EK Cryofuel Compatible
Jingway Iceland X Compatible
Liquid.Cool CFX Opaque Compatible
Mayhems IDC Compatible
Mayhems Pastel Compatible
Mayhems X1 Compatible
Mayhems XT-1 Nuke Compatible
Mayhems XT-1 Compatible
Nanoxia Cooling Fluid Pro Compatible
Nanoxia Cooling Fluid Pro Opaque Compatible
Primochill TRUE. Compatible
Thermaltake C1000 Compatible
XSPC EC6 Compatible
XSPC ECX Compatible

Using Link with a Corsair AXi Digital Power Supply

The Corsair AXi Series PSUs have a lot of premium features. They use a digital signal processor for better performance, they're fully modular, and have a zero RPM fan mode at low loads. But one of the coolest things about the AXi power supplies, is their compatibility with the new Corsair Link software. Today, we take a look at the Corsair Link 2 software, or just "Link" for short, and more specifically how it gives you the ability to monitor AC input, DC output, the temperature and the fan speed of an AXi power supply.

The first thing I want to do is open up the "Graph" tab and set what I want to monitor in the "Config Panel" of this tab...

Using Link with a Corsair AXi Digital Power Supply

Above, you can see that I've checked boxes asking to have my two graphics cards' temperatures and fans graphed, as well as my CPU's temperature, the temperature of my AX860i power supply, as well as the AX860i's fan speed. I'm also monitoring the temperature of the coolant in the Hydro Series H100 that is cooling the CPU and the RPMs of the two fans cooling the H100's radiator.

Using Link with a Corsair AXi Digital Power Supply

While the system is idle, we can see that temperatures are relatively low. The AX860i is just barely over room temperature and therefore, the fan is not spinning.



Over on the "Power" tab, we see that the AX860i is only producing 107.3W as I sit here watching the Link software. It's pulling 117.8W from the wall, so our efficiency is 91%.

On this tab, we can also monitor our voltages, including the voltage of our AC mains, as well as current for each of our +12V outputs.

There are also check boxes that allow you to turn OCP on for the 8-pin +12V outputs (labeled "PCIe") on the power supply. OCP stands for "over current protection" and will shut down the power supply if too much current is delivered on any of these outputs.

Finally, we see the AX860i's temperature and the fan RPM on this tab. This is the same information we saw on the "Graph" tab, but in a different format. The fan is still not spinning because the temperatures are still low, but if we wanted to increase the airflow within our chassis just a bit, we can manually turn the fan speed up.

We start on the "System" tab...



On this tab, we can see everything that Corsair Link 2 monitors, but if we click on the "AX860i Fan" icon on the left, a configuration panel opens up on the right. By default, we can see the fan mode is set to "quiet" which means the fan isn't going to spin at low loads. Changing this is easy...

Using Link with a Corsair AXi Digital Power Supply

The lowest setting is 40%, which equates to about 784 RPM. I can keep it like this and still not hear the fan. And the fan will still ramp up even faster automatically if needed. Let's turn it up even more to find out where I can start hearing the fan...



At 76%, the fan is spinning 1508 RPM. I can definitely hear that now. Well, that's enough of that. Let's put the PSU fan back into "quiet" mode, fire up Prime95 and Furmark and see what kind of power we produce and let the fan spin up all on its own...

Using Link with a Corsair AXi Digital Power Supply

Almost immediately, the temperatures of the CPU and graphics cards increase. Under this load, we start to see the power supply fan ramp up as well.

Using Link with a Corsair AXi Digital Power Supply

After some time under load, we see our temperatures level out, an increase in the graphics cards' fan's RPMs and the PSU's fan leveling off just over 500 RPM.

Using Link with a Corsair AXi Digital Power Supply

When we switch back over to the "Power" tab, we can see that our load has increased to 473.4W. We're now pulling 502.9W from the wall and our efficiency is increased to 94%. We can see that the amperage delivered on all of our +12V connectors has increased, the AX860i's temperature has increased very slightly, from 26.5 to 28.8°C, and the fan is now spinning at 556 RPM.



Of course, when you're gaming you're probably not going to be able to watch your load, temperatures and fan speeds while you're playing. For this reason, Corsair Link allows you to log whatever information you'd like to keep track of in a CSV file. Simply check the boxes of the components you want to monitor, browse to where you want to save the file and give the file a name and click "start logging".

 
CARREGAR MAIS
1x Commander PRO
2x RGB LED hub cables
4x Thermal sensors
4x Fan extension cables
2x Mounting tape
1x Installation guide

MELHORES JUNTOS