Cooler líquido Hydro Series™ H75 para CPUs

139,97 $ USD

ADD TO CART

SKU CW-9060015-WW
Cooler líquido Hydro Series™ H75 para CPUs

139,97 $ USD

O Hidro Series™ H75 proporciona o resfriamento por lí,quido eficaz e eficiente da CPU em um tamanho compacto. O radiador de 120 mm tem apenas 25 mm de altura para compatibilidade com a maioria dos gabinetes, e as ventoinhas PWM duplas tê,m controle de PWM para um desempenho de resfriamento personalizá,vel. O suporte de montagem universal sem ferramentas é, compatí,vel com a maioria das placas-mã,e Intel e AMD.

Radiador slim de 25 mm e ventoinhas PWM duplas para resfriamento líquido e personalizável de CPUs

O Hidro Series H75 proporciona o resfriamento por líquido eficaz e eficiente da CPU em um tamanho compacto. O radiador de 120 mm tem apenas 25 mm de espessura e está lado a lado com os tubos de diâmetro padrão não flexíveis de gabinetes menores e espaços mais restritos. As ventoinhas duplas SP120L de 120 mm suportam duas hastes de ventoinhas na placa-mãe, para permitir o controle automático da velocidade da ventoinha com base na temperatura da CPU. O sistema de montagem sem ferramentas tem ampla compatibilidade de soquetes Intel e AMD. A placa de resfriamento Microfin de cobre e a bomba de rolamentos cerâmicos de alta qualidade ajudam a fornecer uma transferência térmica confiável e de baixo ruído longe da CPU. E como todos os coolers líquidos Hydro Series para CPUs, o Hydro Series H75 é completamente independente, jamais necessitando de abastecimento ou manutenção.

Placa de resfriamento Microfin de cobre

A placa de resfriamento retira o calor da CPU e o insere no líquido circulante. O cobre possui excelente condutividade térmica, e o design Microfin fornece uma transferência de calor rápida e eficiente.

Radiador de 25 mm x 120 mm

A espessura de 25 mm combina a ampla área de superfície de resfriamento com um tamanho de baixo perfil ideal para gabinetes menores ou qualquer instalação na qual o espaço seja especial.

Ventoinhas PWM duplas de alto torque e 120 mm

Ventoinhas duplas montadas em lados opostos do radiador para fluxo de ar de fácil ativação ou desativação de alta velocidade. Você pode conectá-las às hastes da ventoinha PWM padrão na placa-mãe para um controle de velocidade da ventoinha preciso e selecionar o nível exato de desempenho que você necessita.

Ampla compatibilidade com soquetes Intel® e AMD®

O Hydro Series H75 funciona com praticamente todas as placas-mãe Intel e AMD atuais.

Bomba de rolamentos cerâmicos de alta qualidade

O confiável mecanismo da bomba foi projetado para ser silencioso.

Instalação de suporte sem ferramentas

Todos os acessórios de montagem estão incluídos. A instalação é simples, e você não precisa sair procurando uma chave de fenda.

CONTEÚDO E ESPECIFICAÇÕES




Especificações técnicas

  • Radiator Dimensions: 120mm x 152mm x 25mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2000 RPM
  • Fan airflow: 54 CFM
  • Noise level: 31.4 dBA
  • Fan static pressure: 2.8 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
No
Radiator Dimensions
120mm x 152mm x 25mm
Fan Dimensions
120mm x 25mm
Fan Speed
2000 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
SP Series
Fan airflow
54 CFM
Noise level
31.4 dBA
Fan static pressure
2.8 mm-H2O
CARREGAR MAIS

Hydro H75 Spare Parts List


CO-8950012
Corsair Fan SP120L 2000 RPM, 53.61 CFM, 120mm x 25mm, PWM, Single Pack H75 Replacement Fan
CW-8960017
Hydro Series H75 H105 Intel LGA 1150, 1155, 1556, 1366, 2011 Mounting Bracket Kit
CW-8960018
Hydro Series H75 H105 AMD AM2, AM3, FM1, FM2 Mounting Bracket Kit
CW-8960019
Hydro Series H75 H105 Fan Y-Header Cable

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.