Cooler líquido para CPU de extremo desempenho Hydro Series™ H110i de 280 mm

194,57 $ USD

ADD TO CART

SKU CW-9060026-WW
Cooler líquido para CPU de extremo desempenho Hydro Series™ H110i de 280 mm

194,57 $ USD

O cooler líquido para CPU Hydro Series™ H110i tem um radiador de 280 mm e ventoinhas duplas PWM SP140L para a dissipação de calor excelente que você precisa para CPUs altamente overclocked.


Compatível com iCUE da CORSAIR

Um radiador de 280 mm e ventoinhas duplas PWM SP140L fornecem a dissipação de calor excelente que você precisa para CPUs altamente overclocked.

O Hydro Series H110i é um cooler líquido para CPU completo de desempenho extremo para gabinetes com montagens de radiador de 280 mm. O radiador de 280 mm e ventoinhas duplas PWM SP140L fornecem a dissipação de calor excelente que você precisa para CPUs altamente overclocked. Ele é compatível com Corsair Link, assim você pode personalizar o desempenho do resfriamento, monitorar a temperatura do sistema e alterar a cor da iluminação LED RGB.

Radiador de 280 mm

O segredo para resfriamento rápido e eficiente é maximizar a área da superfície de resfriamento. Se seu gabinete de PC tem montagens duplas de ventoinhas de 140 mm espaçadas para um radiador de 280 mm, o H110i permite que você aproveite o potencial total de resfriamento de seu gabinete.

Ventoinhas PWM SP140L avançadas

As ventoinhas de 140 mm incluídas são projetadas especialmente para fornecimento de ar de pressão estática alta com o mínimo de turbulência e ruído. Elas são controladas por PWM, assim você pode personalizar a velocidade da ventoinha para encontrar o melhor equilíbrio entre resfriamento e ruído.

Corsair Link embutido

Prenda o cabo Corsair Link incluído a um conector USB em sua placa-mãe e faça o download do software Corsair Link gratuito para permitir ainda mais potência. Você pode personalizar o desempenho de resfriamento, monitora a temperatura da CPU e do líquido de arrefecimento e alterar a cor da iluminação LED RGB do padrão branco para corresponder ao seu sistema, ou alterar a cor com base nas leituras de temperatura e outras informações.

Resfriamento de CPU de alto desempenho simplificado

O H110i é um design de circuito fechado que vem preenchido. Ele inclui um suporte de montagem modular sem necessidade de ferramentas para instalação mais rápida e apresenta designs de placa fria e bombas para eficiência altamente sintonizada.

Sobre os Coolers líquidos para CPU Hydro Series:

Os coolers para CPU Corsair Hydro Series fornecem o poder do resfriamento líquido em um pacote compacto fácil de instalar. Eles oferecem resfriamento superior para desempenho mais alto de overclocking, sem a complexidade de kits de resfriamento líquido tradicional.

Controle inteligente. Infinitas possibilidades.

O software iCUE da CORSAIR dá vida ao seu sistema com o controle da iluminação RGB dinâmica sincronizada, permite personalizar a velocidade das ventoinhas para possibilitar uma operação mais silenciosa e oferece recursos avançados de monitoramento de sistema.

SAIBA MAIS

CONTEÚDO E ESPECIFICAÇÕES



  • Package Contents

  • Hydro Series H110i Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two SP140L High Torque 140mm Fans
  • USB cable for Corsair Link™ Integration
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011 and 2011-3
  • AMD™ sockets FM1, FM2, AM2, AM3, and AM4

Especificações técnicas

  • Radiator Dimensions: 140mm x 322mm x 27mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 2100 RPM
  • Fan airflow: 113 CFM
  • Noise level: 43 dBA
  • Fan static pressure: 3.99 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
Yes
Radiator Dimensions
140mm x 322mm x 27mm
Fan Dimensions
140mm x 25mm
Fan Speed
2100 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
RGB
Radiator Size
280mm
Fan Model
SP Series
Fan airflow
113 CFM
Noise level
43 dBA
Fan static pressure
3.99 mm-H2O
CARREGAR MAIS

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.