SKU CW-9060014-WW
Refrigerador de CPU a líquido Hydro Series™ H110 de 280 mm e elevado desempenho

143,98 € EUR

O refrigerador de CPU a líquido Hydro Series™ H110 de 280 mm oferece refrigeração de elevado desempenho silenciosa e eficaz para caixas com suporte para radiador de 280 mm.

SEM ESTOQUE

Desempenho extremo para resfriamento de CPU para montagens de radiador de 280 mm

O Hydro Series H110 é um refrigerador a líquido tudo-em-um que proporciona refrigeração muito superior à das ventoinhas a ar convencionais. A refrigeração a líquido funciona melhor do que a refrigeração a ar e o design autónomo do H110 facilita a proteção da sua valiosa CPU.

Tire partido da compatibilidade da sua caixa com radiadores de 280 mm

Para se obter uma refrigeração eficaz, o tamanho é importante - a física não mente. Se a caixa do seu PC poder ser utilizada com radiadores de 280 mm, o Hydro Series H110 oferece-lhe melhor desempenho. As ventoinhas de maior diâmetro garantem melhor fluxo do ar e menos ruído do que a maioria das ventoinhas de 120 mm. Por outro lado, a maior superfície do radiador de 280 mm permite uma refrigeração mais rápida.

Ventoinhas de 140 mm de baixas rotações

As lâminas da ventoinha de 140 mm incluída são maiores do que a maioria das lâminas das ventoinhas de 120 mm, pelo que o mesmo fluxo de ar é obtido com uma velocidade de rotação mais baixa, reduzindo o nível de ruído sem afetar o desempenho.

Tubagem da próxima geração

A tubagem fácil de dobrar e com nível baixo de evaporação garante a inexistência de fugas..

Design avançado da placa de arrefecimento e do coletor

A placa de arrefecimento em cobre garante uma assombrosa transferência térmica e o design do coletor foi pensado para um fluxo eficaz.

Suporte de montagem simples

O suporte de montagem em várias plataformas adapta-se facilmente a processadores Intel® e AMD™:

CONTEÚDO E ESPECIFICAÇÕES



  • Package Contents

  • Corsair Hydro Series H110 Extreme Performance Liquid CPU Cooler
  • Mounting kit for all modern CPU sockets
  • Two 140mm High Torque Fans
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Compatibility

  • Intel 115x, Intel 2011/2066
  • AMD AM3/AM2

Especificações técnicas

  • Radiator Dimensions: 140mm x 312mm x 29mm
  • Fan Dimensions: 140mm x 25mm
  • Fan Speed: 1500 RPM
  • Fan Airflow: 94 CFM
  • Noise Level: 35 dBA
  • Fan Static Pressure: 1.64 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
Yes
CORSAIR iCUE Compatibility
No
Radiator Dimensions
140mm x 312mm x 29mm
Fan Dimensions
140mm x 25mm
Fan Speed
1500 RPM
Number of Fans
2
Cooling Socket Support
Intel 115x, Intel 2011/2066, AMD AM3/AM2
Lighting
None
Radiator Size
280mm
Fan Model
Standard
Fan Airflow
94 CFM
Noise Level
35 dBA
Fan Static Pressure
1.64 mm-H2O
CARREGAR MAIS

Por Pure Overclock

Registrado em  28 de Janeiro de 2013

Hydro Series H110 wins Madshrimps Performance award

If your case can house it, the Hydro 110, CORSAIR's new flagship, is the ultimate All in One Cooling kit tested till date by the Madshrimps crew.

Revisão completa!

Por Hitech Legion

Registrado em  31 de Janeiro de 2013

Hydro Series H110 wins Gold award from OC3D!

“The big daddy gold award goes to the NZXT Kraken X60 and Corsair H110 in main part for the awesome temperatures. They are both a little rough around the edges and I think they both have areas in which they can make them better all round performers.”

Revisão completa!

Por Hardware Heaven

Registrado em  5 de Abril de 2013

Hydro H110 wins Hardware Heaven Recommended award!

“So how did we feel about the cooler overall? Well on the performance front it is an impressive device. Class leading thermal performance is backed by low noise operation, which is always a great mix.”

Revisão completa!

Por Overclock3D

Registrado em  2 de Abril de 2013

The Hydro H110 wins the Guru3D Top Pick award!

“The overall performance we think is terrific, and combined with the extremely low noise levels the H110 gets my approval real fast.”

“Leaving the bling out of this kit keeps it quite affordable, and as such comes recommended by Guru3D.com with a Top Pick award.”

“You know, we recently tested the NZXT Kraken series which in essence is a product close to the Corsair H110. Both originate from the very same ODM, albeit with different preferences and specs. The basis (radiator/cooling-block) however is from the same DNA. So it's not a surprise to see the two similar sized products perform very close to each other. My preference however goes to Corsair for the simple fact that is it the most silent product.”

Revisão completa!

Hydro H110 Spare Parts List


CP-8920128
Hydro Series H90/H110 140MM Single Replacement Fans
CW-8960012
Hydro Series H40/H50/H55/H70/H90/H110 AMD Mounting Bracket Kit
CW-8960013
Hydro Series H40/H50/H55/H70/H90/H110 Intel Mounting Bracket Kit

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to install CORSAIR AMD Bracket