Refrigerador líquido para CPU de alto desempenho CORSAIR Hydro série™ H80i

166,57 $ USD

ADD TO CART

SKU CW-9060008-WW
Refrigerador líquido para CPU de alto desempenho CORSAIR Hydro série™ H80i

166,57 $ USD

Proteja seu hardware e aumente o potencial de overclock da sua CPU. Ventiladores duplos e um radiador com o dobro da espessura oferecem uma incrí,vel eficiê,ncia em refrigeraç,ã,o e, com o CORSAIR Link&trade,, você, pode monitorar e ajustar o desempenho da refrigeraç,ã,o.

Resfriamento líquido de CPU de alto desempenho com o Corsair Link™

Proteja seu hardware e aumente o potencial de overclock da sua CPU. O radiador de ventiladores duplos e com o dobro da espessura oferece uma incrível eficiência de refrigeração.

Corsair Link integrado

Nenhum hardware adicional é necessário – basta conectar o cabo do Corsair Link incluído a um conector USB da placa-mãe e fazer download grátis do software Corsair Link Dashboard. Você pode monitorara temperatura de resfriamento e ajustar o desempenho do resfriamento diretamente pelo desktop.

Design avançado do ventilador

Os ventiladores de 120mm usam pás de projeto personalizado para melhor pressão estática para relação de ruído, oferecendo maior desempenho a níveis de ruído mais baixos.

Completamente independente

O Hydro série H80i vem pré-preenchido e nunca precisa ser cheio ou preparado novamente.

Kit de suporte de montagem magnética multiplataforma sem uso de ferramentas

O design modular simplifica a instalação e é compatível com processadores Intel® e AMD®.

Tubulação de grande diâmetro e baixa permeabilidade

A evaporação mínima do refrigerante ajuda a assegurar a longa durabilidade; e o material resiliente oferece alta flexibilidade e excelente proteção contra vazamentos.

CONTEÚDO E ESPECIFICAÇÕES



  • Package Contents

  • Corsair Hydro Series H80i High Performance Liquid CPU Cooler
  • Magnetic Multi-platform mounting kit for all modern CPU sockets
  • Dual SP120L High Performance Fans
  • USB Cable for Corsair Link™ Compatibility
  • Fan and radiator mounting screws
  • Thermal compound (pre-applied)
  • Quick Start Guide
  • Compatibility

  • Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3
  • AMD™ sockets FM1, FM2, AM2, and AM3

Especificações técnicas

  • Radiator Dimensions: 120mm x 152mm x 38mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2700 RPM
  • Fan airflow: 77 CFM
  • Noise level: 37.68 dBA
  • Fan static pressure: 4.0 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
YES
CORSAIR LINK compatibility
Yes
Radiator Dimensions
120mm x 152mm x 38mm
Fan Dimensions
120mm x 25mm
Fan Speed
2700 RPM
Number of Fans
2
Cooling Socket support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
SP Series
Fan airflow
77 CFM
Noise level
37.68 dBA
Fan static pressure
4.0 mm-H2O
CARREGAR MAIS

Por Hot Hardware

Registrado em  30 de Novembro de 2012

Hydro Series H80i wins Premium Grade award from Bit-tech.net

"There’s very little to dislike about the H80i. It's even easier to install and better built than the H80 before it, and produces consistently improved cooling results than the older model too. Better yet, it only costs an extra £5, putting it on par with Antec's Kuhler H20 920 (which it also trumps) and thus representing very good value too. Our concerns about it being used as an intake were nullified by its excellent performance as an exhaust setup, even in our minimal airflow test chassis."

Revisão completa!

Por Overclockers Club

Registrado em  23 de Novembro de 2012

Kitguru gives the H80i its Must Have Award!

�Overall we are very impressed by what the Corsair H80i has to offer. It improves significantly on the previous H80 model which was already one of the best coolers on the market.�

Revisão completa!

Por tweaktown.com

Registrado em  12 de Fevereiro de 2012

Hydro Series H80i and H100i win Performance Awards from MadShrimps.be!

“CORSAIR has reset the bar again at a higher level. Outperforming their own range, adding the LINK software and this complete performance bundle operates at a lower noise level. The 120mm H80i will blend in perfectly in most enclosures, while the 240mm H100i needs a dual 120mm top case. The installation is pure child’s play and no worrying about DIMM incompatibility with your cooling setup. Without any surprise the cooling performance of both Hydro units is again top notch. Being covered by a 5 year warranty, how can you go wrong with one of these new Hydro Coolers?”

Revisão completa!

Por Guru3D

Registrado em  12 de Julho de 2012

H80i wins 'Excellent' award from Sweclockers.com!

"Corsair Hydro H80i is a really nice end water cooling package. The model adds a number of improvements over its predecessor, including an improved water block and more lavish fans. Moreover, the model has support from the board for Corsair Link superb control software that completely blows away competing solutions." (Google Translation)

Revisão completa!

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�

How to find your lot code

Lot codes for Corsair products can generally be found in the follow locations. For more specific information, please view the Corsair knowledge base Lot Code article for a particular product series.

Audio:

     Headset: code is located on the earcup?s arm.

     Speakers: code is located on the back of the subwoofer.

Case: the code is located on the case?s back panel.

Cooling: the code is located on the radiator.

Flash: the code is located on the unit?s packaging, near UPC barcode.

Flash SSD: the code is located on the label on top of the SSD.

HID:

     Mice: the code is located on the label taped next to the USB connector.

     Keyboard: the code is located on the packaging near the UPC barcode.

Memory: the code is on the memory module?s label. PSU: The code is on the PSU?s label, next to the serial number.

Warranty FAQ

How do I make a warranty claim?

Prior to submitting your warranty claim, we recommend checking the Corsair knowledge base at https://support.corsair.com/ first, where you can find answers to commonly-asked questions. You can also receive troubleshooting assistance by clicking Ask a Question or proceed with product replacement by clicking Request an RMA.

Valid warranty claims should be processed through the retailer where the item was purchased during the first thirty (30) days after purchase. This period may vary depending on where you purchased your product; please verify the return policy with the retailer where you purchased your product. Any warranty claims that cannot be processed through your original point our purchased should be submitted to Corsair at https://support.corsair.com/ 

What are Corsairs replacement options?

Corsair offers the following Warranty fulfillment options:

Standard Replacement:

Through Corsairs Standard Replacement process, Corsair will issue an approved RMA number for the return and replacement of your defective product(s). Our Standard Replacement processing time from receipt of your product(s) to the replacement product(s) shipment is 1-3 business days plus transit time.

Express Replacement:

At Corsair, we understand the need to be up and running at all times! To minimize down time, we offer an Express Replacement RMA process. Through this process Corsair will ship your replacement product(s) prior to receiving your defective product(s). This process requires a valid Credit Card where a holding fee will be applied for the cost of the product until the returning product(s) are received by Corsair. To avoid being fully charged for the Express Replacement product(s), the defective product(s) must be received by Corsair within 10 business days from the date your Express Replacement order is shipped.

Accessory Product Request:

Experiencing a problem with a Corsair Component Product? Many of Corsair products have easy to install replacement accessories which will resolve the issue and prevent the need to return the entire product for replacement.

Where do I ship my items?

Corsair operates multiple RMA receiving locations worldwide. Your RMA confirmation will specify the specific return address you must use when sending your RMA package. This will be your standard return location and should not be changed without prior approval from Corsair. Any packages received at an unauthorized location may be refused and returned to the sender at the senders expense.