CORSAIR NAUTILUS II 240 / 360 RS LCD

The NAUTILUS II RS LCD cooler comes with RS II fans pre-installed. Fan orientation can be adjusted based on radiator mounting direction to help keep cables out of view.

• Remove the existing AMD AM5 / AM4 mounting brackets shown.

• Align the Pump (G) with the pre-installed bracket over the motherboard mounting holes, then fasten the screws a few turns at a time in a cross pattern, alternating between opposite corners, until all four are tightened.

• Mount the NAUTILUS II RS LCD (1) inside the case with the Radiator Screws (E) as shown.

• Remove the pre-installed AMD AM5 / AM4 Mounting Bracket Set (C).
• Attach the Intel LGA 1851 / 1700 Mounting Bracket (A).

• Align the backplate (B), then adhere it with the self-adhesive side behind the motherboard.

• Align the Pump (G) with the installed bracket over the motherboard mounting holes, then fasten the screws a few turns at a time in a cross pattern, alternating between opposite corners, until all four are tightened.

• Mount the NAUTILUS II RS LCD (1) inside the case with the Radiator Screws (E) as shown.

• Remove the top PCIe slot cover from the PCIe plate.
• Guide the DisplayPort cable from the NAUTILUS II RS LCD (G) along the graphics card and out through the top opening in the PCIe plate.

• Seat the DisplayPort cable into the U-shaped cutout of the PCIe Slot Cover (D), then attach the cover to the PCIe plate.

• Connect the DisplayPort cable to the graphics card.

• Connect the 4-pin PWM cable from the NAUTILUS II RS LCD pump to the AIO_PUMP header on your motherboard.

• Connect the long, 600mm cable with the female PWM connector from the RS II fans to the CPU_FAN header on the motherboard.

• Download and install the latest version of iCUE software.

• Once iCUE is installed, run the software. The NAUTILUS II RS LCD tile will appear in the iCUE interface.

• If any of the connected devices need a firmware update, you will be prompted to perform an update via a notification in the top right corner. You can also click the Settings cogwheel icon in the top right corner and check for software and firmware updates manually.

Click the Settings cogwheel in the NAUTILUS II RS LCD tile, then click the "Rotate" button to change the screen orientation.

The Screen Setup page allows you to choose how the NAUTILUS II LCD screen is used and configure keyboard shortcuts for switching between screens.

• Select "Screen Setup" in the left-hand panel.
• In the bottom "Screen Setup" panel, select "iCUE Widgets" to display iCUE widgets, such as system monitoring, images/videos, or other customizable widgets.
• Select "Desktop" to use the LCD screen as a secondary desktop display.
• Assign a keystroke to "Switch Display Option" to toggle between "iCUE Widgets" and "Desktop" modes.
• Assign a keystroke to "Previous Display Screen" to switch to the previous screen page.
• Assign a keystroke to "Next Display Screen" to switch to the next screen page.

The Pages Personalization page allows you to customize the look of each LCD screen page.

• Select "Pages Personalization" in the left-hand panel.
• Select the page you want to personalize by clicking the page indicator under the screen preview image.
• Adjust the page theme, background, widget colors, and widget transparency using the options available in the bottom "Pages Personalization" panel.
• To add or change the background, click the "+" button next to "Device Background" and select a preset image or upload a custom one.

The Widgets page allows you to add, configure and personalize iCUE Widgets.

• Select "Widgets" in the left-hand panel.
• Click the "+" button on the screen preview image to add a new widget.
• To add a new page, click the "+" button under the screen preview image.

• Select the desired widget from the bottom "Widgets" panel.
• Configure the selected widget using the various options in the bottom center and right panels.

• Visit our CORSAIR EXPLORER page for additional setup, configuration, and tips.

Can I control the pump and fans using CORSAIR iCUE software?

Yes. You can use the CORSAIR COMMANDER DUO Lighting and Fan Controller to control the pump and fans through iCUE. For more details, please refer to the following links:

• CORSAIR COMMANDER DUO Lighting and Fan Controller: Everything You Need to Know
• CORSAIR COMMANDER DUO QUICK START GUIDE

How do I know the direction of the airflow of the fan?

An arrow located on the side of the fan indicates the direction of airflow.

What orientation should I install my radiator?

Figure 1 shows the ideal radiator orientation. If case layout or clearance prevents this, use alternative setups as shown in Figure 2 and Figure 3. Whichever orientation you choose, always ensure the top of the radiator sits higher than the CPU pump.

Can I reuse the pre-applied thermal paste on the cooler for re-installation?

Re-installation of the NAUTILUS II RS Series CPU cooler will require you to clean off the pre-applied thermal paste and apply a new layer of thermal paste. We recommend using CORSAIR XTM70, sold separately.

What should I do if I've lost or damaged a specific part of the NAUTILUS II RS LCD CPU cooler?

Replacement parts for the NAUTILUS II RS LCD CPU coolers are sold through the CORSAIR webstore.

How can I rotate my images and / or GIFs through iCUE software?

Once the LCD screen is recognized by iCUE software, images and GIFs shown on the screen can be adjusted, including uploading new content and changing orientation via the device settings in the software.

NAUTILUS II RS Pump: 12Vdc Max 1A

RS240 II Fans: 12Vdc Max 0.8A / Typical 0.34A
RS360 II Fans: 12Vdc Max 1.2A / Typical 0.51A

CORSAIR NAUTILUS II RS LCD Series coolers have a 5-year warranty.

© 2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.