Mid-tower-chassit CORSAIR iCUE LINK RGB 3500X i härdat glas kombinerar byggvänliga funktioner och en elegant look med glaspaneler med tre förinstallerade iCUE LINK RX120 RGB-fläktar.
Inklusive
Paneler i härdat glas med borttagbara front- och sidopaneler
3 st. förinstallerade iCUE LINK RX120-fläktar med iCUE LINK System Hub
Byggvänliga funktioner för högpresterande och anpassade datorer
Fläktmonteringspunkter på sidan, upptill och nedtill möjliggör fantastisk kylning
Kompatibelt med moderkort med anslutningar på baksidan, som ASUS BTF och MSI Project Zero
Du behöver inte en stor formfaktor för att bygga en grym PC. 3500X har plats för de flesta stora grafikkort och processorkylare, 360 mm-kylare och till och med EATX-moderkort – utan att ta upp massor av plats på skrivbordet.
3500X-chassit är kompatibelt med moderkort från ASUS BTF och MSI PROJECT ZERO, så det är enkelt att dölja alla kopplingar och kablar för ett stilrent bygge.
PRESTANDA PÅ ETT ENKELT SÄTT
iCUE LINK OCH HÖGPRESTERANDE RX RGB-FLÄKTAR INGÅR
Den medföljande iCUE LINK System Hub och tre RX RGB-fläktar gör det enkelt att komma igång med ditt bygge, och det revolutionerande ekosystemet iCUE LINK gör det enkelt att dölja dina kablar och visa upp dina komponenter.
RX Series-fläktarna är ingenjörskonst på hög nivå som ger dig bästa tänkbara kylning för både kylare och chassin tack vare CORSAIRs välvda magnetiska lager, AirGuide-teknik och egenutvecklade fläktblad som optimerats för kylningseffektivitet.
Minska kabelröran med ett nätverk av smarta, sammankopplade komponenter.
LÄNKA DINA KOMPONENTER
iCUE LINK-ekosystemet använder en enda anslutning för alla iCUE LINK-enheter.
SYNKRONISERA DITT SYSTEM
Varje komponent ansluts direkt till nästa, vilket skapar en kedja av enheter.
KALL LUFT I KUBIK
KYLPRESTANDA
Effektiv kylning är A och O för en modern PC och 3500X ger dig allt du behöver med fläktfästen på sidorna, i taket och på nätaggregatet. Och med fästen på både sidorna och i taket för 360 mm-kylare får du massor av potential för vätskekylning.
ENKEL MONTERING
3500X ger dig avancerade designfunktioner i ett vanligt PC-format med många praktiska funktioner som gör det enkelt att bygga.
AVTAGBARA GLASPANELER
Front- och sidopanelerna i härdat glas ger 3500X en distinkt look och är lätta att ta av för att snabbt få tillgång till dina komponenter.
KABELDRAGNING
En rymlig interiör och 38 mm bakom moderkortet gör kabeldragningen enkel och bekväm.
LAGRINGSALTERNATIV
En avtagbar enhetsplatta har plats för upp till 2 HDD- och 2 SSD-enheter för att täcka alla dina lagringsbehov.
FLEXIBLA KYLNINGSMÖJLIGHETER
Anpassa kylningen med plats för upp till 10 st. 120 mm-fläktar och flexibla kylarmonteringsmöjligheter (upp till 360 mm) i taket och på sidan.
MÅTT
FLÄKTKAPACITET
KYLARKAPACITET
3500X har gott om plats för att kyla ner riktigt ambitiösa byggen.
Skapa luftflöde från alla sidor och genom hela ditt system för bästa tänkbara prestanda.
120mm
140mm
Tack vare flera olika monteringspositioner för kylare kan du optimera din vätskekylning och hålla både temperaturer och fläktljud nere.
120mm
140mm
1
2
3
4
5
MODERN FRONTPANEL I/O
Dina anslutningar är inom bekvämt räckhåll, inklusive en USB 3.2 Gen 2 Type-C-port, 2 st. USB 3.2 Gen 1 Type-A-portar och ett kombinerat ljud-/mikrofonuttag.
1
Återställningsknapp
2
Kombinerat hörlurs-/mikrofonuttag
3
USB 3.2 Gen 2 Type-C-port
4
2 x USB 3.2 Gen 1 Type-A-portar
5
Strömbrytare
TVÅ ÅRS GARANTI
SUPPORT I VÄRLDSKLASS
Vår prisbelönta kundtjänst ser till att du alltid kan använda våra produkter utan problem.
Overview
Key Features
GPU Clearance (425mm Maximum Length)
Fits flagship GPUs including the RTX 4090 and RTX 5090 models with ease. Unlike compact cases that force you to remove drive cages or compromise cooling, the 3500X gives you clean GPU installation without sacrificing storage or airflow. This future-proofs your build for next-gen cards without needing a full-tower footprint.
Dual 360mm Radiator Support (Top + Side Mount)
Run dual 360 mm radiators — one on top, one on the side — for custom loop builds or separate CPU and GPU AIOs. This cooling capacity typically requires a full tower, but the 3500X delivers it in a mid-tower that fits most desks. Ideal for overclocked CPUs and high-wattage GPUs that need serious cooling.
iCUE LINK Ecosystem (3x RX120 Fans + System Hub Included)
Each iCUE LINK fan connects directly to the next, then a single cable runs to the hub. No more confusing messes of fan headers and RGB splitters. This saves time during assembly and creates a cleaner build. The included RX120 fans feature Magnetic Dome bearings and AirGuide technology for quiet, efficient cooling. Expanding with more iCUE LINK fans or an AIO later is simple and fast.
Reverse-Connector Motherboard Support (ASUS BTF, MSI PROJECT ZERO, GIGABYTE PROJECT STEALTH)
Reverse-connector boards move all cables to the back of the case for an ultra-clean front view. The 3500X's 45 mm cable routing space accommodates the extra connectors, and the wraparound glass panels show off your immaculate build from every angle.
Use Cases
High-end enthusiast builder (RTX 4090/5090, custom water cooling, E-ATX):
Dual 360 mm radiator support handles overclocked CPUs and 450W+ GPUs in a mid-tower footprint. 425 mm GPU clearance fits the largest 50 series cards even with thick radiators installed. E-ATX compatibility supports premium boards up to 305 mm x 277 mm. Wraparound glass showcases custom loops; 45 mm of clearance behind the motherboard tray maintains clean aesthetics.
First-time PC builder (ease of installation, included fans, cable management):
Three pre-installed iCUE LINK RX120 RGB fans connect with one cable to the included hub—no fan headers or RGB splitters to figure out. 45mm of room for cable management makes management simple, while removable front and side glass panels let you access everything easily. Saves hours on your first build.
Airflow-focused builder (mesh panels, maximum fan positions, thermal priority):
The 3500X supports 10 fans and dual 360mm radiators simultaneously — unmatched in mid-towers. Three included iCUE LINK RX120 fans with AirGuide technology deliver efficient cooling. Bottom and side intake feeding top exhaust creates positive pressure and direct GPU cooling.
Showcase / RGB builder (tempered glass, clean cable routing, visual impact):
270-degree wraparound tempered glass showcases your build from every angle. Reverse-connector motherboard support reduces front-facing cables. Three pre-installed iCUE LINK RX120 RGB fans synchronize through a single-cable connection — fewer cables ruining the view. Vertical GPU mounting displays your GPU face-forward.
Tech Specs
Case Supported
Mini-ITX, Micro-ATX, ATX, E-ATX (305mm x 277mm)
Case Height
506
Case Length
460
Case Width
240
Material
Steel, Tempered Glass
Motherboard Support
Mini-ITX, Micro-ATX, ATX, E-ATX (305mm x 277mm)
Color
BLACK
Case Size
Mid-Tower
Radiator Compatibility
120mm, 140mm, 240mm, 280mm, 360mm
Case Window
Tempered Glass
Compatible Liquid Coolers
H60, H100, H115, H150 (All Series)
Case Warranty
2 Year
Internal 3.5" Drive Bays
2
Internal 2.5" Drive Bays
2
Maximum CPU Cooler Height
170mm
Maximum PSU Length
180mm
Case Front IO
(1x) USB 3.2 Gen 2 Type-C, (2x) USB 3.2 Gen 1 Type-A, (1x) Audio in/out
Maximum GPU Length
425mm
Weight
10.54kg
Case Expansion Slots
7 Horizontal (or 4 Vertical)
Case Power Supply
ATX
Radiator Support - Top
360mm, 280mm, 240mm
Radiator Support - Front
None
Radiator Support - Bottom
None
Radiator Support - Side
360mm, 280mm, 240mm
Radiator Support - Rear
1x 120mm
Fan Support - Top
3x 120mm; 2x 140mm
Fan Support - Front
None
Fan Support - Bottom
3x 120mm; 1x 140mm
Fan Support - Side
3x 120mm; 2x 140mm
Fan Support - Rear
1x 120mm
Front IO Motherboard Connections
1x HD Audio; 1x USB 3.2 Gen1; 1x USB-3.2 Gen2 Type-E; 1x F_PANEL
Yes. The 3500X supports GPUs up to 425 mm in length, which is enough for all current 4090 and 5090 models. Moving the intake fans to the side creates more clearance for GPU length
Yes. You can mount a 360mm radiator in the top and another 360mm radiator in the side simultaneously without issue. This makes the 3500X a good contender for a custom cooling build.
iCUE LINK uses a single-cable system to make cable management easier. Each device only has to connect to another in and eventually back to the System Hub. The iCUE LINK variants of the 3500X come with a System Hub and 3x LX120-R or 3x RX120 fans.
Yes. The 3500X is compatible with reverse-connector motherboards including ASUS BTF, MSI PROJECT ZERO, and GIGABYTE PROJECT STEALTH models. There is 45mm of room behind the motherboard tray which ensures you don’t have to bend the cables too much.
The 3500X supports Mini-ITX, Micro-ATX, ATX, and E-ATX motherboards up to 305mm x 277mm. This covers the majority of motherboards on the market.
The 3500X supports CPU coolers up to 170 mm tall. This accommodates most tall air cooler models. Remember to check the height of the air cooler you’re considering before buying.
Three iCUE LINK RX120 RGB fans and an iCUE LINK System Hub are included. The RX120 fans feature quiet magnetic dome bearings, vivid RGB lighting, and come preinstalled as intake fans in the side mounts.
Yes. The 3500X supports up to 10 fans total: 3x 120mm or 2x 140mm up top, 3x 120mm or 2x 140mm in the side side, 2x 120mm on the PSU shround, and 1x120mmn or 1x 140mm on the bottom of the case.
Yes. Both the front and side tempered glass panels are held in place by plastic snaps that require just a little pull to remove.
The front panel includes 1x USB 3.2 Gen 2 Type-C port, 2x USB 3.2 Gen 1 Type-A ports, and a combination headphone/microphone jack.
The 3500X has a 45mm of clearance behind the motherboard tray. This creates a wide gap that allows for easier cable management without bending the cables too much. It also ensures that there is enough room for reverse connector motherboards.
Yes, but a riser cable is required (sold separately). The case supports vertical GPU mounting with 4 vertical expansion slots. Standard horizontal mounting uses 7 expansion slots.
The 3500X supports power supplies up to 180 mm in length. This fits most standard ATX PSUs including fully modular models. Check your specific PSU dimensions if you have an extra-long unit.
Yes. The 3500X has removable dust filters for the bottom of the case and the side intake.
The 3500X comes with a 2-year warranty from CORSAIR, covering manufacturing defects and materials. CORSAIR's customer support is available to assist with any warranty claims or technical questions.