MANUAL | QUICK START GUIDE

CORSAIR GAMING CHAIR

UNIVERSAL GAMING CHAIR

In this Guide

  1. INTRODUCTION
  2. PACKAGE CONTENTS
  3. STEP 1: INSTALL CASTERS
  4. STEP 2: INSTALL PISTON AND COVER
  5. STEP 3: ASSEMBLE CHAIR SEAT MECHANISM
  6. STEP 4: INSTALL ARMRESTS
  7. STEP 5: SECURE SEAT BACK TO SEAT CUSHION
  8. STEP 6: PLACE CHAIR ASSEMBLY ON BASE
  9. STEP 7: PLACE COVERS ON HINGES
  10. STEP 8: ADD NECK AND LUMBAR PILLOWS (OPTIONAL)
  11. USER MANUAL
    1. 1. TILT LOCK / HEIGHT ADJUSTMENT
    1. 2. RECLINE LEVER
    1. 3. 4D ARM REST
    1. 4. TILT TENSION KNOB
  12. SAFETY AND MAINTENANCE - TYPE C
  13. WARRANTY
  14. LEGAL
  15. RELATED CONTENT

INTRODUCTION


Congratulations on your new CORSAIR chair! This quick start guide will walk you through assembly and get you sitting and comfortable as quickly as possible. There may be differences in the shape, color, or design of your specific chair, but be assured the assembly techniques shown here are compatible for all CORSAIR chairs. We also have a video guide for most of our chairs on the CORSAIR LAB YouTube Channel, found here:

http://www.youtube.com/CORSAIRHowTo

Thanks for choosing CORSAIR and we hope you enjoy your new chair!


PACKAGE CONTENTS


Seat back

Seat cushion

NOTE: On some models (B1) have the arm rests pre-installed. Others (B2) require installation


Neck / head and lumbar pillow (if equipped)

Seat control base

Piston cover


Gas piston

Seat base

Casters


Seat back bracket covers

Assembly hardware and tools
NOTE: the included screw quantity, size, and other components may vary slightly


STEP 1: INSTALL CASTERS



STEP 2: INSTALL PISTON AND COVER


NOTE: If there is a protective cover on the tip of the gas lift, remove it.


STEP 3: ASSEMBLE CHAIR SEAT MECHANISM


NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware bag. Use four screws to secure seat base.


STEP 4: INSTALL ARMRESTS


NOTE: If your chair seat had arm rests pre-installed, you can skip this step.

NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware pack.

Arm rests may vary in number of screws required to secure to base.


STEP 5: SECURE SEAT BACK TO SEAT CUSHION


NOTE: On some models, the screws are pre-installed in the seat and will need to be removed and re-used. In others, the screws are in the hardware pack. Use two screws per side.


STEP 6: PLACE CHAIR ASSEMBLY ON BASE



STEP 7: PLACE COVERS ON HINGES


NOTE: Some models may also require a hinge cover to be installed with a screw, while others have the cover pre-installed.

Cover hinge with plastic cover, secure with small screw into chair. Use the plug to cover the screw hole.

NOTE: Cover, hinge, and plug designs may vary between models.


STEP 8: ADD NECK AND LUMBAR PILLOWS (OPTIONAL)



USER MANUAL


WARNING: Improper use of this chair may cause damage to this chair or result in personal injury. Please use this chair in a non-abusive manner.

1. TILT LOCK / HEIGHT ADJUSTMENT

Push the lever towards the center of the chair to engage the tilt lock. Pull it away from the chair to disengage the tilt lock.

To lower the height of the chair, pull the lever upwards while weight is applied on the chair. To increase the height, pull the lever up while the chair is empty.


2. RECLINE LEVER

Pull this lever up to recline the seat back forward or backward.

WARNING: Do not apply pressure to the seat back prior to pulling the recline lever. The sudden shift of weight may cause the chair to become unstable which may cause damage to the chair and/or result in personal injury.


3. 4D ARM REST

NOTE: Not all chairs feature four-way arm rest adjustability, some may feature two or three-way modes instead.

A. Forward / backward slide button
B. In / out button
C. Height adjustment tab
D. Swivel


4. TILT TENSION KNOB

Rotate this knob to increase (+) or decrease (-) the tilt tension.

TIP: If the chair tilts easily, you may want to increase the tension. Alternatively, decrease the tension if you find it too hard to lean back while sitting on the chair.


SAFETY AND MAINTENANCE - TYPE C

  • Use a dry cloth to wipe surface stains. Stubborn stains can be gently wiped with a warm, damp cloth or with a mild cleaner. Caution: Do no use alcohol, solvents, or corrosive liquids when cleaning.
  • Your chair’s casters are designed for use on carpet and hard flooring only. Avoid using the chair on sloped or uneven surfaces to prevent sliding or damage.
  • This chair is designed for office or home-office use. It is not intended for medical or rehabilitation purposes or for use in humid, corrosive, or high-temperature environments, or as a ladder or climbing aid.
  • Every six months, inspect the gas cylinder and casters for looseness or unusual noises. For replacement of your chair's adjustable gas lift, only qualified personnel should service the product. Please contact CORSAIR customer service for more details. 

WARRANTY


2 YEARS WARRANTY

All CORSAIR Gaming chairs have a 2-year warranty.


LEGAL


© 2026 CORSAIR MEMORY, Inc. All rights reserved. CORSAIR and the sails logo are registered trademarks of CORSAIR in the United States and/or other countries. All other trademarks are the property of their respective owners. Product may vary slightly from those pictured.