Neutron Series™ 64GB SATA 3 6Gb/s SSD

Neutron 系列固态硬盘:无需折衷的优异存储性能Neutron 系列固态硬盘带给您持续的快速存储速度,轻松应对一切电脑任务。先进的 Link_A_Media(LAMD)SATA 3 固态硬盘控制器既能提供高 IOPS,也能保证超快速的连续读取速度,实现可靠快速体验。

Neutron 系列固态硬盘:无需折衷的优异存储性能

Neutron 系列固态硬盘带给您持续的快速存储速度,轻松应对一切电脑任务。先进的 Link_A_Media(LAMD)SATA 3 固态硬盘控制器既能提供高 IOPS,也能保证超快速的连续读取速度,实现可靠快速体验。


Neutron 系列提供无需折衷的超强整体存储性能。卓越的优异性能与非凡速度使您的电脑无所不能。


许多固态硬盘在可压缩和解压文件的读/写阶段都能取得较快的加载速度,而在已压缩数据的读取方面则会显著变慢。通过对已压缩和未压缩数据提供卓越性能,Neutron 更胜一筹。

SATA 3 6G/秒的极限速度

Neutron 系列 GTX 的设计充分采用了最新的高速标准,完全发挥最新电脑的最优性能。它同时还能向下兼容 SATA 2。


Neutron 系列固态硬盘可适用于大部分笔记本,即使具有更多空间限制的许多最新超薄机型。提供支持多数台式机型的适配器。

The 7mm form factor fits both standard notebooks as well as the latest generation of slim notebook designs. If you’re considering upgrading your notebook to something slimmer, your Neutron can move with it.


专业级 LAMD 固态硬盘控制器

LAMD 控制器的设计不仅可提供超高 IOP — 完美应对视频和图像编辑等数据密集型任务,还具有卓越的连续读取速度以进行快速文件访问。


固态硬盘可以快速压缩和解压文件。一些固态硬盘在打开无法进一步压缩的文件时会遭遇瓶颈。这包括视频、音频与图像文件,并且如果电脑还担当了娱乐中心,或者您的工作需要处理媒体文件,性能不足的固态硬盘将会拖慢您的脚步。Neutron 专注实际性能的设计意味着处理非压缩数据时也能实现令人惊叹的加载速度。


Neutron 采用 2.5 英寸通用规格,可快速安装至大多数笔记本电脑。它可安装到带有内置 2.5 英寸驱动器的新型个人电脑中,通过自带的 3.5 英寸适配器,还可在标准驱动器槽中进行安装。

许多新款超薄笔记本为了追求轻薄,牺牲了容纳固态硬盘的机身高度。Neutron 仅 7 毫米高,可超越许多其它的固态硬盘,适应超薄空间。

SATA 3 6G/秒极速设计

Neutron 系列的设计充分支持最新的高速标准,完全发挥最新电脑的最优性能。它同时还能向下兼容 SATA 2。


Neutron 系列固态硬盘支持 Windows 7 TRIM 指令。这可使其仅存储所需数据,并执行内存优化,确保尽可能最快的写入速度。





SSD Unformatted Capacity
SSD Smart Support
35k IOPS (4k aligned)
SSD Interface
Power Consumption active
4.6W Max
Power Consumption Inactive
0.6W Max
Form Factor
2.5 inch
NAND Technology
5V ±5%
SSD Shock
1500 G

Corsair SSDs with Zero Overprovisioning Space

Much has been written about overprovisioning and its implementation on SSDs. In short, overprovisioning, or OP, is a portion of storage space on an SSD that is reserved for use only by the SSD controller. The three most common uses for this space are wear leveling, the replacement of bad blocks, and read-modify-writes. Overprovisioning serves to help increase both the longevity and performance of SSDs and it is a very common practice among SSD manufacturers.

However, some users would like to be able to buy their SSDs without the built in overprovisioning and make the decision to OP, or not to OP for themselves. They prefer the flexibility of deciding for themselves when to OP and how much space to use based on their specific needs. Corsair has announced and is now offering SSDs without this overprovisioned space.

Corsair SSDs with overprovisioning space typically have used 7% of the total SSD storage capacity. This means that users now have a choice with these new drives to use them with or without overprovisioning. Users can manually overprovision the drives if they wish or, they can leave them at their full capacity with no overprovisioning and enjoy the extra space.

For users of 256GB SSDs, this means they can have an extra 16GB of storage capacity on their drive over the equivalent 240GB overprovisioned SSD. Of course, RAID users will benefit even more as the number of drives is increased.

In reading some of that aforementioned information about overprovisioning, I've found a great deal of very useful information over at Anandtech. Here's a diagram from one of Anand's SSD articles highlighting how overprovisioning works.

Corsair SSDs with Zero Overprovisioning Space

Our initial offerings in the non-OP drive arena are in the Force Series GS and the Neutron Series with more to come. For more information on our SSD lineup, please visit our Corsair website SSD page.

To OP, or not to OP. That is the question. Whether tis nobler to the PC performance...


Corsair SSD Toolbox

Corsair proudly brings you the Corsair SSD Toolbox. This helpful utility provides users with several powerful and useful tools for use with Corsair SSDs. Let's take a look. Download the Corsair SSD Toolbox HERE

The Corsair SSD Toolbox will run on:

  • XP SP3 (32-bit)...(64-bit version not supported)
  • Vista 32-bit w/ latest SP (all functions)
  • Vista 64-bit w/ latest SP (all functions)
  • Win 7 32-bit w/ latest SP (all functions)
  • Win 7 64-bit w/ latest SP (all functions)
  • Win 8 32-bit (TRIM is not supported, all others functions are)
  • Win 8 64-bit (TRIM is not supported, all others functions are)

We have provided a detailed help file which can be accessed by clicking on the question mark symbol shown here circled in red on the upper left side of the screen.

Corsair SSD Toolbox

This help file gives detailed information on each function of the SSD toolbox. Clicking the question mark will open the help file in a browser.



Your main screen at launch shows the drive information of single drives attached to the system. Other drives will appear in the drive information window but core functionality is restricted to authorized Corsair SSDs. RAID volumes will not be seen as single drives as the tool cannot address them individually. The "i" symbol will show you the toolbox version number and license agreement. The circular arrows will refresh the tool.





Corsair SSD Toolbox

Individual drive information is shown in the center of the main window. When your SSD controller is in AHCI mode, you can update your SSD firmware from this page using the button circled in red below. The firmware update requires AHCI mode. AMD/nVidia chipset systems may require different storage drivers for proper operation. USB connected SSD drives must use SAT-capable cables/enclosures that support ATA/SAT-pass-through.





Corsair SSD Toolbox





After you select firmware update the tool will scan your drive and check for firmware updates. If there is an update available, the dialogue will prompt you to update the firmware or cancel the operation.



Note: Firmware updates can only be executed when the SSD controller is in AHCI mode. Firmware updating via this toolbox is enabled for The Corsair Series Force 3, Force Series GT, Force Series GS, Neutron Series, and Neutron Series GTX SSDs. Earlier and EOL Corsair drives with firmware updates can be updated manually using the tools supplied on our website.

The next screen will prompt you to backup your data before updating your firmware. The updates are intended to be non-destructive but we strongly encourage users to back up any critical data before performance a firmware update. If you wish to continue, press Apply.



Corsair SSD Toolbox

Once your drive is updated, close the toolbox window using the close button.





Corsair SSD Toolbox





Note: Corsair recommends that users update their OS drive as attached storage when possible. Some systems will require the SSD to be disconnected briefly before the new firmware version will appear in the Drive Information window.



Additional functions can be activated with the column of buttons down the left side of the toolbox. Corsair is now producing SSDs that do not have factory overprovisioning. For users that desire to manually overprovision their drives, we have provided a function for this. Overprovisioning your drive can contribute to maintaining better performance and adding longevity to your SSD.

Corsair SSD Toolbox

Users desiring to monitor the S.M.A.R.T status on their drives can do so using the S.M.A.R.T. button. Find more details on Self-Monitoring, Analysis and Reporting Technology here.



Corsair SSD Toolbox

We have a disk cloning feature under development. At the time of this article, this feature is not complete but it is expected along very soon. For now as you can see, it's under construction. This feature will allow users to easily clone to and from their Corsair SSDs.





Users have asked for a feature to allow them to manually send a TRIM command to their drives and to also schedule a TRIM operation so that they can optimize their SSD's performance.







Corsair SSD Toolbox

SSD users also occasionally have need to perform a secure erase operation. The tool allows for this in one easy step.







The Corsair SSD Toolbox is extremely useful and versatile. We're confident that our customers will find it very useful and see it as an added value to a superb Corsair SSD.





发布于  2013年6月19日

Corsair Neutron SSD Scores 9 out of 10 at!

"Corsair aimed to bring a cheap but fast SSD on the market with the neutron Series 256GB. After numerous benchmarks, we can congratulate the manufacturer: The goal was achieved with flying flags! With a gigabyte price of less than € 0.75, our test model turned out to be dream come true for the bargain hunters. Speaking performance, power consumption and lifetime also for solid-state drive."


Neutron Series SSD
3.5" adapter for desktop PCs