SKU CW-9060028-WW
Hydro Series™ H45液冷CPU散热器

当您更换CPU的现有散热片时,Hydro Series H45可让您的PC可更冷更安静地运行。

转换为液冷

当您以Hydro Series H45更换您的CPU的标准散热片时,可让您的PC可更冷更安静地运行。安装简单:您若能接触到PC主板的背面,就可以安装H45。您只需要一把螺丝刀。紧凑的组件和挠性的管路,让您即使空间狭小也能轻松安装Hydro Series H45。可让您即使在紧凑的状况下,只要将120mm风扇安装在靠近CPU处(H45可能刚刚好),仍能提升您的CPU冷却效率。

独立的冷却系统

高性能CPU适用的液冷方式不再意味着要面对复杂的管道。Hydro Series H60为预充式,永远不需要回填或启动。

低渗透橡胶冷却管

冷却液蒸发越少,越能延长使用寿命,而弹性橡胶不仅弹性高并且防漏性佳。

小尺寸泵

泵单元提供高速循环,而不会占用太多空间。这使得安装更容易,也帮助提升机箱的气流流动。

铜质散热板,预涂有导热膏

铜质导热性佳,可更有效率传热到歧管。预涂导热膏,可让您免于可能杂乱的安装步骤。

内容和规格



  • Package Contents

  • Hydro Series H45 Liquid CPU Cooler
  • Mounting Kit
  • Fan and Radiator Mounting Screws
  • Thermal Compound ( Pre-Applied)
  • Quick Start Guide
  • Compatibility

  • Intel 115x, Intel 2011/2066
  • AMD AM3/AM2, AMD AM4

技术规格

  • Radiator Dimensions: 168.5mm x 120mm x 71mm
  • Fan Dimensions: 120mm x 25mm
  • Fan Speed: 2300 RPM
  • Fan Airflow: 94 CFM
  • Noise Level: 31 dBA
  • Fan Static Pressure: 3.65 mm-H2O
Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
PWM
Yes
CORSAIR iCUE Compatibility
No
Radiator Dimensions
168.5mm x 120mm x 71mm
Fan Dimensions
120mm x 25mm
Fan Speed
2300 RPM
Number of Fans
1
Cooling Socket Support
Intel 115x, Intel 2011/2066, AMD AM3/AM2, AMD AM4
Lighting
None
Radiator Size
120mm
Fan Model
Standard
Fan Airflow
94 CFM
Noise Level
31 dBA
Fan Static Pressure
3.65 mm-H2O
加载更多

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�