SKU CW-9060023-WW
Hydro Series™ H5 SF 小尺寸液冷 CPU 冷却器

Hydro Series™ H5 SF 是一款小尺寸液冷 CPU 冷却器,提供高效冷却功能,适用于小尺寸机箱。拥有集成式高压吹风机,液冷效果强大并且静音。

安静、强大的小尺寸液冷 CPU 冷却,适用于高性能的 Mini-ITX PC

The Hydro Series H5 SF 是一款小尺寸液冷 CPU 冷却器,提供高效冷却功能,适用于 Mini-ITX 系统。打造小尺寸系统不一定意味着必须在处理器速度上有所妥协,您可以透过 H5 SF 提供系统的高性能 CPU 可靠的冷却效果。

体积小巧,冷却效果高

H5 SF 可在放不下全尺寸 Hydro Series 液冷 CPU 冷却器的机箱中提供高性能 CPU 高效的液冷冷却效果。

通用 Mini-ITX 兼容性

H5 SF 原本是为了 Corsair Bulldog 家庭游戏系统而开发,但是也非常适用于所有使用 Mini-ITX 主板的系统。

独特的冷却系统设计

含有泵组件以及铜质散热板和柔性低渗透冷却管,就像我们的较大型 Hydro Series 机型一样。与一体式吹风机完全匹配,通过从 PC 内部抽取冷空气并将其排到机箱外来冷却循环液。因此,H5 SF 不仅可以让 CPU 散热,而且可通过不间断吸入冷气,额外让主板和其他组件散热。

高性能适用的优质组件,并且安装简单

低渗透冷却管有助于延长使用寿命,灵活的设计让狭小空间中的安装更轻松。散热板因为铜有优异的热传导特性而使用铜质,加上预涂的导热膏可让您在安装时节省时间、减少麻烦。

内容和规格



  • Package Contents

  • Hydro Series H5 SF Low-Profile Liquid CPU Cooler
  • Cooler Mounting Hardware
  • CPU Mounting Hardware
  • Detailed installation guide
  • Warranty leaflet

Cooling Warranty
Five years
Cold Plate Material
Copper
Radiator Material
Aluminum
加载更多

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�