SKU CO-9050003-WW
Air Series™ AF120性能版大风量120mm风扇

$690.00 TWD

Air Series AF120风扇可让您全部拥有。九个超薄的定制扇叶可产生充裕的风量。橡胶边角可大幅降低振动。

Fan Size
Package Quantity

大气流实现高效的大容量散热

Air系列的AF机箱风扇诸型号在不受限制的空间能达到极高性能,间隙距离至少应达到3 cm (1.2”),它们可安装在PC机箱的后侧或顶端,成为排风扇的理想选择,适用于会在机箱中产生热量的PC主板和CPU、显卡和其他部件。对于类似于侧面或底面进风的区域,它们作为不受限制的进风扇同样工作良好。

对于像硬盘托架之类限制性较高的区域或者风量较少的其他紧凑空间,请了解我们Air Series SP型高静压风扇。

性能

AF120性能版 AF120静音版
尺寸 120mm x 25mm 120mm x 25mm
工作电压 7V - 12V 7V - 12V
12V性能 12V性能
气流 63.47 CFM 39.88 CFM
静压 1.1 mmH20 0.5 mmH20
声级 30 dBA 21 dBA
速度 1650 RPM 1100 RPM
电力消耗 0.13 A 0.08 A

内容和规格



  • Package Contents

  • x1 AF120 Performance Edition Fan
  • Three colored rings in red, blue, and white
  • Mounting Screws
  • Voltage step-down adapter for lower speed operation

Fan Warranty
Two years
Fan Size
120mm x 25mm
Bearing Type
Sleeve
Fan Type
Performance Edition
Flow Type
Airflow
LED Color
None
Operating Voltage
7V - 12V
PWM Control
NO
CORSAIR iCUE Compatibility
NO
Fan Model
AF Series
Package Quantity
Single Fan
Speed
1650 RPM
Sound Level
30 dBA
Power Draw
0.13 A
Static Pressure
1.1 mmH20
Fan Airflow
63.47 CFM
加载更多

Socket 2011 Hydro Series CPU Cooler Mounting Guide

The new Intel® Socket 2011, used on the new X79 motherboards and the new 2nd generation Intel Core Sandy Bridge-E CPUs, has changed significantly from Socket 1366. As you can see below there are no longer the traditional holes through the PCB. There is now a metal bracket that has been tapped to accept M4 screws. Because of this the Corsair

Hydro Series H70, H80 and H100 CPU coolers all come with separate screws to mount on Socket 2011 boards.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Hydro Series H80 and H100

Included with the H80 and H100 are four standoffs that have a shorter wider end. These are for socket 2011, the shorter end screws into the metal mounting plate on the motherboard.

Socket 2011 Hydro Series CPU Cooler Mounting Guide

Install all four of the standoffs as shown below.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

After installing and tightening down all four standoffs, the CPU cooler is ready to be installed.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Next the thumb nuts are installed. Tighten these in an X pattern to ensure the pressure is even, resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide



Hydro Series H70 Core

The H70 Core uses the same bracket for socket 1155, 1156, 1366, and 2011. Again socket 2011 uses larger M4 screws and does not need the backplate. Make sure all of the holes on the retention ring are towards the outside (as seen below). Then install the M4 screws through these holes.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

The retention ring should then be put on the H70 Core. The H70 Core cooling unit and retention ring can then be installed on the motherboard. The M4 screws will screw right into the mounting holes on the motherboard. Again tighten these in an X pattern to ensure the pressure is even resulting in a good mount on the CPU.

Socket 2011 Hydro Series CPU Cooler Mounting Guide Socket 2011 Hydro Series CPU Cooler Mounting Guide

Corsair Airflow Pro Installation Guide

How to Install the Corsair Airflow Pro Dynamic Memory Display (PDF)

We have prepared a short pictorial guide on How To Install the Corsair Airflow Pro Dynamic Memory Display.�